GT Designer3 Version1 Screen Design Manual (Functions)

Attribute
*1 State
Item Description Model
Type
19 - 6 19.1 Settings
For details of *1, refer to the following.
(1) Display for state other than those set on the [Point/Line Attribute] tab
When the state is other than those set on the [Point/Line Attribute] tab, it is displayed with the display attribute
set on the [Style] tab.
(2) When states are overlapped
When states are overlapped, the state with smaller No. has priority.
Graph type : Sample
Switching device : D10
Select the type of the point/line that indicates coordinate position.
When the line is set to a type other than the solid line, it may not be displayed properly if it is
positioned close to other point/line.
Size Select the size of the point (Large, Medium, Small)/line (1 to 7).
Color Select the display color of the point/line.
Range Range Set the range of word device values for display change using a conditional expression.
Operation priority for
setting overlap state
High
Low
Type of point :
Type of line :
State No. Range Type Size Color
1 8