Moeller Wiring Manual 02/05 - Klockner Moeller Parts

2
Moeller Wiring Manual 02/05
Electronic motor starters and drives
Soft starters DS4
LED displays
The LEDs indicate the operational states as
follows:
Red LED Green LED Function
Lit Lit Init, LEDs lit only briefly, Init itself takes about 2 seconds
Depending on device:
– All devices: LED briefly lit once
– DC devices: after a brief pause, the LEDs briefly light up again
Off Off Device is off
Off Flashing at 2 s
intervals
Ready for operation, power supply OK, but no start signal
Off Flashing at 0.5 s Device in operation, ramp is active (soft start or soft stop); on M(X)R
interval
the current rotating field direction is also indicated.
Off Lit Device in operation, top-of-ramp reached; on M(X)R the current
rotating field direction is also indicated.
Flashing at
0.5 s interval
Off Fault
U
Ue
A1, A2
FWD, REV, 0
U = 100 %
out
Run-
(FWD/REV-) LED
Error-LED
Initialization Fault Ready for operation In ramp Top of ramp
For 2-20Immediate
Delivery call KMParts.com at (866) 595-9616