Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
QUALITY STRENGTH PERFORMANCE SINCE 1981<br />
QUICK INFO >>><br />
True race block which will work with most standard<br />
components. Provisions for wet or dry sump oiling<br />
systems. Great for power adders and maximum effort<br />
engines.<br />
Dart’s Iron blocks for Ford are designed to work<br />
with stock components, but are much more than<br />
a stock replacement.<br />
Designed from the ground up for hard core racing,<br />
all the weaknesses of the factory castings<br />
have been addressed. Dart blocks are cast from<br />
premium high strength Iron with extra thick<br />
cylinder walls and decks. The main webs are<br />
beefed up and fitted with steel 4-bolt main caps.<br />
FEATURES<br />
IRON EAGLE<br />
SMALL BLOCK FORD<br />
CAST IRON ENGINE BLOCKS<br />
• Siamesed cylinders: Standard 4.000” or 4.125” cylinders can be safely bored<br />
to 4.185” diameter, extra thick walls prevent cracking and improve ring seal.<br />
• Extended cylinder barrels for improved piston support.<br />
• Four deck heights: 8.200” (302), 8.700” (stroker 302), 9.200” (351C) and<br />
9.500” (351W) allow increased displacements up to 468 cubic inches.<br />
• Steel 4-bolt main bearing caps are standard. Three center caps have splayed<br />
outer bolts for maximum strength.<br />
• Two main bearing diameters: 302 (2.249”) or 351C (2.749”) allow choice<br />
of small or large journal crankshaft.<br />
• Upgraded oiling system has been completely redesigned with a low<br />
restriction priority main oiling system with rear external oil pump feed.<br />
• Reinforced head bolt bosses are blind tapped to prevent leaks and produce<br />
accurate torque readings. Extra thick decks prevent head gasket leaks.<br />
• Parts kit included (PN 32000003 - see page 118).<br />
PART NO. DESCRIPTION CAPS MAIN SIZE DECK BORE<br />
31384175 302 Std. Deck Steel 302 8.200" 4.000"<br />
31384275 302 Std. Deck Steel 302 8.200" 4.125"<br />
31384185 302 Tall Deck Steel 302 8.700" 4.000"<br />
31384285 302 Tall Deck Steel 302 8.700" 4.125"<br />
31384195 351 W Short Deck Steel 302 9.200" 4.000"<br />
31384295 351 W Short Deck Steel 302 9.200" 4.125"<br />
31385195 351 W Short Deck Steel 351C 9.200" 4.000"<br />
31385295 351 W Short Deck Steel 351C 9.200" 4.125"<br />
31385135 351 Std. Deck Steel 351C 9.500" 4.000"<br />
31385235 351 Std. Deck Steel 351C 9.500" 4.125"<br />
IRON EAGLE SPECS<br />
Material: High Nickel 220<br />
BHN Cast Iron<br />
Deck Heights: 8.200", 8.700", 9.200"<br />
and 9.500”<br />
Cylinder Bores: 4.000” or 4.125”<br />
4.185” (max)<br />
Main Bearings: 302 or 351C<br />
Main Caps:<br />
Steel 4-bolt<br />
Lifter Provision: .875" tie bar<br />
Restrictor Provision: Front & rear<br />
Freeze Plugs: Press fit<br />
Weight:<br />
178-210 lbs.<br />
SHORT BLOCKS TOP KITS BLOCKS HEADS MANIFOLDS CRANKSHAFT ACCESS SBC LS BBC SBF HON COATINGS BILLET<br />
Not intended for sale or use with pollution controlled vehicles.<br />
248.362.1188 / DARTHEADS.COM Connect with us socially, search: DART MACHINERY<br />
101