You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
CHAMPIONSHIP ENGINE COMPONENTS<br />
MADE IN THE USA<br />
SHORT BLOCKS TOP KITS BLOCKS HEADS MANIFOLDS CRANKSHAFT ACCESS SBC LS BBC SBF HON COATINGS BILLET<br />
QUICK INFO >>><br />
Dart’s Race Series Aluminum big block is based on<br />
the Chevrolet big block V8 design, with added features<br />
like increased deck height and a raised cam<br />
location.<br />
The camshaft is raised .400" above the stock<br />
location to increase clearance for the connecting<br />
rods and crankshaft counterweights.<br />
The main oil gallery is located alongside the<br />
camshaft tunnel to eliminate interference with<br />
the crank assembly.<br />
Advanced engineering makes Dart Aluminum<br />
big blocks the choice for serious competition.<br />
FEATURES<br />
• Premium alloy: Dart Aluminum blocks are cast from RMR Cast Aluminum<br />
alloy for superior strength and integrity.<br />
• Standard 9.800” or 10.200” deck heights/options to 10.400”.<br />
• Raised camshaft location +.400” clears stroker crankshafts.<br />
• Ductile Iron sleeves with extra thick cylinder walls promote excellent ring seal.<br />
• Reinforcing ribs strengthen the lifter valley and bell housing flange.<br />
• Inboard valley head stud bosses improve head gasket sealing.<br />
• Priority main oiling system delivers oil directly to the crankshaft bearings to<br />
enhance reliability at high engine speeds.<br />
• With or without distributor provision.<br />
• Steel 4-bolt main caps or Ductile Iron and optional Aluminum caps. Splayed<br />
outer bolts for extra strength.<br />
• Dual oil pan bolt patterns fit standard and notched oil pans.<br />
• Parts kit included (PN 32000006 - see page 118).<br />
RACE SERIES - ALUMINUM<br />
PART NO. CAPS DECK CAM LIFTERS BORE<br />
31264345 Steel 9.800" Std. .842" 4.250"<br />
31264445 Steel 9.800" Std. .842" 4.500"<br />
31264645 Steel 9.800" Std. .842" 4.600"<br />
31264385 Steel 10.000" Std. .842" 4.250"<br />
31264485 Steel 10.000" Std. .842" 4.500"<br />
31264685 Steel 10.000" Std. .842" 4.600"<br />
31264355 Steel 10.200" Std. .842" 4.250"<br />
31264455 Steel 10.200" Std. .842" 4.500"<br />
31264655 Steel 10.200" Std. .842" 4.600"<br />
31264395 Steel 10.400" Std. .842" 4.250"<br />
31264495 Steel 10.400" Std. .842" 4.500"<br />
31264695 Steel 10.400" Std. .842" 4.600"<br />
BIG BLOCK CHEVY<br />
CAST ALUMINUM ENGINE BLOCKS<br />
Dart blocks can be special ordered with a wide<br />
array of special machining options to suit your<br />
specific requirements.<br />
ALUMINUM TIMING CHAIN COVER<br />
PN 67240002<br />
For +.400” Raised Cam Block (includes gasket).<br />
RACE SERIES SPECS<br />
Material: RMR Cast<br />
Aluminum Alloy<br />
Deck Height: 9.800” to 10.400”<br />
Cylinder Bores: 4.250” to 4.600”<br />
Oil Pan Rails: Stock<br />
Main Caps: Steel<br />
Cam Location: Raised +.400”<br />
Lifter Bores: .842”<br />
Freeze Plugs: Screw-in<br />
Rear Seal: 2-Piece<br />
Weight: 136-168 lbs.<br />
Not intended for sale or use with pollution controlled vehicles.<br />
72<br />
248.362.1188 / DARTHEADS.COM Connect with us socially, search: DART MACHINERY