SURGICAL

KMedic Product Information
Instrument type/name:
Raw material:
Wire and Pin Cutters
Forgings from stainless steel
Reinforced with jaw inserts from tungsten carbide or
specially tempered tool steel
Surface:
Main function:
Silk matte satin finish or sand-blasted satin finish
To cut wires and pins
Where used mostly:
Orthopedic surgery (fractures)
Important product features:
A variety of end and side cutters are available for different
wire diameters and different cutting angles. Double-action
handles provide more cutting power and help absorb the
shock of wire cutting, enabling better control with less
fatigue. Carbide inserts may be replaced, extending the
instrument’s life and value. Welded carbide jaws cannot be
replaced.
Useful hints in usage:
Choose the appropriate cutter for the wire diameter being
cut. Maximum cutting capacities are marked on each cutter
and should not be surpassed. Cut in the center of edge,
avoid cutting on ends of cutting edge. When cutting, protect
from flying particles.
Special care instructions:
Other comments:
Instrument subtypes:
Cable Cutters
B97