SA_VOL2 EMPLOYED
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4<br />
600508<br />
4<br />
600508<br />
Q<br />
Q<br />
Q<br />
Q<br />
1,100TYP<br />
1,100TYP<br />
3,000 TYP.<br />
3,000 TYP.<br />
louver & wire mesh scrim<br />
차양으로서의 효과를 극대화 하고 동시에 캐노피의 끝단을 날카롭게 표현하기 위해 경량 알류미늄으로 제작된<br />
DM Stamp<br />
루버가 설치되게 디자인 되었습니다. 또한 fall/debris protection및 복잡한 트러스 구조가 노출되는 것을 masking 하고 직사광을 확산광으로 바꾸기 위해서<br />
PV-2 GLASS LAMINATED<br />
PHOTOVOLTAIC PANEL<br />
wire mesh scrim 이 설계에 포함되었습니다.<br />
MTL-212<br />
Louver<br />
MTL-212<br />
Louver<br />
AESS CATEGORY 1, APPLIED HIGH<br />
PV-2 PERFORMANCE GLASS LAMINATED FINISH<br />
PHOTOVOLTAIC PANEL<br />
AESS CATEGORY 1, APPLIED HIGH<br />
PERFORMANCE FINISH<br />
1,050<br />
1,050<br />
5<br />
600504<br />
Copyright by Bureau Expo Dubai 2020 (EX20). All rights reserved. This<br />
document may not, in whole or in part, be reproduced, stored, transmitted or<br />
distributed in any form or by any means, whether electronic, mechanical, by<br />
photocopy, recording or otherwise, without the prior written permission of<br />
5<br />
EX20. Except where otherwise expressly agreed in writing by EX20, EX20<br />
shall have no responsibility or liability for any loss (direct, consequential or<br />
600504<br />
otherwise) which may arise from reliance on or use of this document or the<br />
Copyright by Bureau Expo Dubai 2020 (EX20). All rights reserved. This<br />
information contained therein.<br />
document may not, in whole or in part, be reproduced, stored, transmitted or<br />
distributed in any form or by any means, whether electronic, mechanical, by<br />
DO NOT SCALE THIS DRAWING.<br />
photocopy, recording or otherwise, without the prior written permission of<br />
EX20. Except where otherwise expressly agreed in writing by EX20, EX20<br />
shall have no responsibility or liability for any loss (direct, consequential or<br />
otherwise) which may arise from reliance on or use of this document or the<br />
information contained therein.<br />
DM Stamp<br />
DO NOT SCALE THIS DRAWING.<br />
2,500<br />
EXTENDING SHADE<br />
Shading is one of the most important functions of the main<br />
EXTENDING canopy, and it is SHADE essential to maximize its footage within the<br />
Shading given design is one parameters. of the most Lightweight important functions louvers, which of the support main<br />
canopy, perimeter and photovoltaic it is essential panels, to maximize extend its the footage boundary within of the the<br />
given canopy design without parameters. exerting excessive Lightweight additional louvers, dead which load support to the<br />
perimeter tip of the canopy. photovoltaic panels, extend the boundary of the<br />
canopy without exerting excessive additional dead 3 load to the<br />
600508<br />
tip of the canopy.<br />
2,500<br />
3<br />
MTL-320<br />
600508<br />
METAL FLOOR PANEL<br />
1,050<br />
1,050<br />
1,050<br />
1,050<br />
No<br />
Description<br />
<strong>SA</strong>FETY, HEALTH AND ENVIRONMENT INFORMATION<br />
Brief details on the identified hazard symbol referencing the unusual residual<br />
hazards / risks are listed above.<br />
No<br />
Description<br />
N<br />
N<br />
PLA-202<br />
CURVED NON-SLIP WALKING SURFACE<br />
MTL-320<br />
GLS-120<br />
METAL<br />
TEMPERED<br />
FLOOR<br />
GLASS,<br />
PANEL<br />
DOUBLE LAYERED,<br />
FRIT PATTERN<br />
PLA-202 MTL-321<br />
CURVED METAL WALL NON-SLIP PANEL WALKING SURFACE<br />
GLS-120<br />
TEMPERED MTL-412 GLASS, DOUBLE LAYERED,<br />
FRIT ALUMINUM PATTERN PV INFILL PANELS<br />
MTL-321<br />
LEVEL (REFLECTED CELILING PLAN)<br />
METAL PERIMETER WALL PANEL<br />
3<br />
PV PLAN DETAIL AT PV LEVEL<br />
MTL-4121 : 50<br />
ALUMINUM PV INFILL PANELS<br />
PV-2 GLASS LAMINATED<br />
PHOTOVOLTAIC PANEL<br />
LEVEL (REFLECTED CELILING PLAN)<br />
3 PERIMETER PV PLAN DETAIL AT PV LEVEL<br />
PV-1 STANDARD PHOTOVOLTAIC PANEL<br />
1 : 50<br />
GLS-120<br />
TEMPERED GLASS, DOUBLE LAYERED,<br />
PV-2<br />
FRIT<br />
GLASS<br />
PATTERN<br />
LAMINATED<br />
PHOTOVOLTAIC PANEL<br />
MTL-411<br />
PV-1<br />
ALUMINUM<br />
STANDARD<br />
PV FRAMING<br />
PHOTOVOLTAIC PANEL<br />
GLS-120<br />
TEMPERED MTL-321 GLASS, DOUBLE LAYERED,<br />
FRIT METAL PATTERN WALL PANEL<br />
MTL-411<br />
ALUMINUM PV FRAMING<br />
MTL-320<br />
MTL-321<br />
METAL FLOOR PANEL<br />
METAL WALL PANEL<br />
MTL-321<br />
METAL WALL PANEL<br />
ACE<br />
MTL-212<br />
AESS CATEGORY 1, APPLIED HIGH Angle varies. Refer to overall<br />
PERFORMANCE FINISH sections.<br />
MTL-321 MTL-212<br />
METAL AESS CATEGORY WALL PANEL 1, APPLIED HIGH<br />
CE<br />
MTL-212<br />
PERFORMANCE FINISH<br />
AESS MTL-211 CATEGORY 1, APPLIED HIGH Shop<br />
Angle<br />
welded<br />
varies.<br />
lateral<br />
Refer<br />
support<br />
to overall<br />
PERFORMANCE AESS CATEGORY FINISH 4, APPLIED HIGH<br />
PERFORMANCE FINISH and<br />
sections.<br />
adjustment for reflector<br />
MTL-212<br />
AESS<br />
MTL-212<br />
CATEGORY 1, APPLIED HIGH panel in and out of plane<br />
PERFORMANCE<br />
AESS CATEGORY<br />
FINISH<br />
1, APPLIED HIGH<br />
PERFORMANCE FINISH<br />
MTL-211<br />
MTL-212<br />
Shop welded lateral support<br />
AESS CATEGORY 4, APPLIED HIGH<br />
AESS CATEGORY 1, APPLIED HIGH<br />
PERFORMANCE FINISH and adjustment for reflector<br />
PERFORMANCE FINISH<br />
MTL-212<br />
panel in and out of plane<br />
AESS CATEGORY 1, APPLIED HIGH<br />
5 TYPICAL PERFORMANCE CANOPY FINISH LOUVER SECTION DETAIL<br />
MTL-212 1 : 50<br />
AESS CATEGORY 1, APPLIED HIGH<br />
PERFORMANCE FINISH<br />
Oversized holes to allow<br />
5 TYPICAL CANOPY LOUVER thermal SECTION movement DETAIL<br />
1 : 50<br />
Oversized holes to allow<br />
Curved tube section<br />
thermal movement<br />
Shop welded lab for reflector<br />
Wire Mesh<br />
panel to hang on dead loadScrim<br />
support Curved tube section<br />
Shop welded lab for reflector<br />
Wire Mesh<br />
panel to hang on dead loadScrim<br />
support<br />
PLA-202<br />
CURVED NON-SLIP WALKING SURFACE<br />
MTL-320<br />
METAL FLOOR PANEL<br />
PV-2 GLASS LAMINATED<br />
PHOTOVOLTAIC PANEL<br />
VAR<br />
2,500 PLA-202<br />
CURVED NON-SLIP WALKING SURFACE<br />
PV-2 GLASS LAMINATED<br />
PHOTOVOLTAIC PANEL<br />
VAR<br />
2,500<br />
<strong>SA</strong>FETY, HEALTH AND ENVIRONMENT INFORMATION<br />
Brief details on the identified hazard symbol referencing the unusual residual<br />
hazards / risks are listed above.<br />
0 03 CANOPY PRE TENDER MR MR 05/26/17<br />
Rev Description Apvr Chk'd Date<br />
Client<br />
EXPO 2020 Lehbab Road,<br />
DWC South<br />
0 03 CANOPY PRE TENDER Dubai - United MRArab Emirates MR 05/26/17<br />
Rev Description T: +971 4 555 Apvr 2020 Chk'd Date<br />
Client<br />
Development Manager<br />
EXPO 2020 Lehbab Road,<br />
DWC<br />
Emaar<br />
South<br />
Properties PJSC<br />
Dubai<br />
P.O. Box<br />
- United<br />
9440,<br />
Arab<br />
Dubai,<br />
Emirates<br />
UAE<br />
T:<br />
T:<br />
+971<br />
+971<br />
4<br />
4<br />
555<br />
3673333<br />
2020<br />
F: +971 4 3673000<br />
enquiry@emaar.ae<br />
Development Manager<br />
Project Manager<br />
Emaar Properties PJSC<br />
P.O. Turner Box International 9440, Dubai, Middle UAE East, Ltd.<br />
T: Turner +971 4 Construction 3673333 - International LLC<br />
F: P.O. +971 Box 4 3673000 13036 - Dubai, UAE<br />
enquiry@emaar.ae<br />
P: +971 4 337 0990<br />
F: +971 4 334 8216<br />
tci.dxb@tcco.com<br />
Project Manager<br />
Turner International Middle East, Ltd.<br />
Local Consultant<br />
Turner Construction - International LLC<br />
P.O. Floor Box 2, Hassanicor 13036 - Dubai, Building, UAE Al Barsha First<br />
P: P.O. +971 Box 4 337 454801, 0990Dubai, UAE<br />
F: T: +971 44334 3998216<br />
4788<br />
tci.dxb@tcco.com<br />
F: +971 4 399 4780<br />
rpedubai@emirates.net.ae<br />
Local Consultant<br />
Design Architect<br />
Floor 2, Hassanicor Building, Al Barsha First<br />
P.O. Box 454801, Dubai, UAE<br />
T: +971 4 399 4788<br />
F: 637 +971 West 4 399 27th 4780 Street<br />
rpedubai@emirates.net.ae<br />
New York, New York 10001<br />
T: +01 212.693.3600<br />
Design Architect<br />
637 West 27th Street<br />
New York, New York 10001<br />
T: +01 212.693.3600<br />
Parcel IDE / Community<br />
5219784 / Madinat Al Mataar<br />
Project Title<br />
EXPO2020 SUSTAINABILITY PAVILION<br />
Parcel IDE / Community<br />
EVENT<br />
CANOPY C144200 ATTACHMENT DETAILS<br />
CANOPY ATTACHMENT DETAILS<br />
Approved<br />
Seal Date<br />
Approver<br />
05/26/17<br />
Designed Drawn Checked<br />
GA Approved<br />
KD WS Seal Date<br />
Model Approver File Ref:<br />
Scale A1 (594x841) 05/26/17<br />
Revision No<br />
Designed Drawn 1 : 5 Checked 0<br />
Drawing GA No<br />
KD WS<br />
92001-DWG-C144200-AR-<br />
Model File Ref:<br />
Scale A1 (594x841) 600509<br />
Revision No<br />
1 : 5 0<br />
Drawing No<br />
92001-DWG-C144200-AR-600509<br />
Project 5219784 Adress / Madinat Al Mataar<br />
Project<br />
Drawing<br />
Title<br />
Title<br />
EXPO2020 EVENT SUSTAINABILITY PAVILION<br />
Shop welded lateral support<br />
Project Adress<br />
and adjustment C144200 for reflector<br />
Drawing Title<br />
panel in and out 00 of plane<br />
EVENT 6<br />
Shop welded lateral C144200 CANOPY support ROOF DETAILS<br />
and adjustment for reflector<br />
00<br />
panel in and out of plane<br />
6<br />
CANOPY ROOF DETAILS<br />
Approved<br />
Seal Date<br />
06/12/17<br />
Designed Drawn Checked<br />
GA KD WS<br />
Shope welded lab Approved for reflector<br />
Seal Date<br />
Model File Ref:<br />
Scale A1 (594x841) Revision No<br />
panel to hang on dead load<br />
92001-MDL-C144200-AR-000002 1 : 50<br />
06/12/17<br />
support<br />
0<br />
Designed Drawn Checked<br />
Drawing No<br />
GA KD WS<br />
Shope welded Curved lab 92001-DWG-C144200-AR-<br />
for tube reflector section<br />
Model File Ref:<br />
Scale A1 (594x841)<br />
600504<br />
Revision No<br />
panel to hang on 92001-MDL-C144200-AR-000002<br />
dead load<br />
1 : 50<br />
support Shop welded connector plate<br />
0<br />
Drawing No<br />
Curved tube section<br />
Verticals for reflector 92001-DWG-C144200-AR-<br />
panel support<br />
600504<br />
Shop welded connector plate<br />
Catwalk supporting arms capture<br />
verticals for reflector panel support<br />
Verticals for reflector panel support<br />
Catwalk supporting arms capture<br />
verticals for reflector panel support<br />
DM Stamp<br />
DM Stamp<br />
Copyright by Bureau Expo Dubai 2020 (EX20). All rights reserved. This<br />
document may not, in whole or in part, be reproduced, stored, transmitted or<br />
distributed in any form or by any means, whether electronic, mechanical, by<br />
photocopy, recording or otherwise, without the prior written permission of<br />
EX20. Except where otherwise expressly agreed in writing by EX20, EX20<br />
shall have no responsibility or liability for any loss (direct, consequential or<br />
otherwise) Copyright by which Bureau may Expo arise Dubai from reliance 2020 (EX20). on or All use rights of this reserved. document Thisor the<br />
information document may contained not, whole therein. or in part, be reproduced, stored, transmitted or<br />
distributed in any form or by any means, whether electronic, mechanical, by<br />
DO photocopy, NOT SCALE recording THIS DRAWING. or otherwise, without the prior written permission of<br />
EX20. Except where otherwise expressly agreed in writing by EX20, EX20<br />
shall have no responsibility or liability for any loss (direct, consequential or<br />
otherwise) which may arise from reliance on or use of this document or the<br />
information contained therein.<br />
DO NOT SCALE THIS DRAWING.<br />
No<br />
Description<br />
<strong>SA</strong>FETY, HEALTH AND ENVIRONMENT INFORMATION<br />
Brief details on the identified hazard symbol referencing the unusual residual<br />
hazards / risks are listed above.<br />
No<br />
Description<br />
<strong>SA</strong>FETY, HEALTH AND ENVIRONMENT INFORMATION<br />
Brief details on the identified hazard symbol referencing the unusual residual<br />
hazards / risks are listed above.<br />
N<br />
03 CANOPY PACKAGE | PRELIMINARY TENDER REPORT<br />
N<br />
03 CANOPY PACKAGE | PRELIMINARY TENDER REPORT<br />
21<br />
21<br />
3<br />
3<br />
WIRE MESH SCRIM<br />
2<br />
Spanning between structural ribs of the main canopy, 1 : 5the wire<br />
mesh WIRE screen MESH intends SCRIMto achieve:<br />
• Spanning Tigris Debris between protection. structural ribs of the main canopy, the wire<br />
• mesh Scatters/diffuses direct sunlight.<br />
Product screen Specifications intends to achieve:<br />
System Components<br />
• Flexible, Tigris Debris Provides one direction protection. visual envelop to emphasize Eye the hooksbeauty of the<br />
Flat & angle<br />
• Material Scatters/diffuses overall geometry AISI Type of direct 316 the SS canopy. sunlight. Flats with flat eye<br />
Product Specifications<br />
System Components<br />
Open Area 64%<br />
Flats with clevis<br />
• Flexible,<br />
Weight Provides one direction visual 1.33 envelop lbs/sqft to emphasize Eye<br />
Frame the hooksbeauty of the<br />
Flat & angle<br />
Max.<br />
overall<br />
width<br />
geometry<br />
26'<br />
of the canopy.<br />
Outrigger tension system<br />
Material<br />
AISI Type 316 SS<br />
Flats with flat eye<br />
Lighting (by others)<br />
Open Area 64%<br />
Weight<br />
1.33 lbs/sqft<br />
Max. width 26'<br />
Lighting (by others)<br />
North American<br />
Headquarters<br />
GKD-U<strong>SA</strong> Inc<br />
825 North Chesapeake AmericanDrive<br />
Cambridge Headquarters MD 21613<br />
T 800-453-8616<br />
StealthLok<br />
GKD-U<strong>SA</strong> Inc<br />
Flats with clevis<br />
T 410-221-0542<br />
StealthLok Sprung<br />
825 Chesapeake Drive<br />
Frame<br />
F 410-221-0544<br />
U-binding frame<br />
Cambridge MD 21613<br />
Outrigger tension system<br />
sales@gkdusa.com<br />
WIB - hooks and springs<br />
T 800-453-8616<br />
StealthLok<br />
gkdmetalfabrics.com<br />
WIB - eyebolts top and bottom T 410-221-0542<br />
StealthLok Sprung<br />
WIB - hooks and eyebolts<br />
F 410-221-0544<br />
U-binding frame<br />
sales@gkdusa.com<br />
WIB - hooks and springs<br />
Applications<br />
gkdmetalfabrics.com<br />
WIB - eyebolts top and bottom<br />
Parking Facades<br />
WIB - hooks and eyebolts<br />
Please refer to<br />
Facades<br />
page 2 for Solar<br />
Safety and Security<br />
Control Data<br />
Applications<br />
Partitions<br />
Parking Facades<br />
15 mm thick Steel Angle<br />
Please refer to<br />
Facades<br />
page 2 for Solar<br />
Removable Safety and Security fastener to allow accessibility<br />
Control Data<br />
Partitions 10 mm thick Continuous Steel Angle<br />
15 mm thick Steel Wire Mesh Angle<br />
Removable fastener to allow accessibility<br />
10 mm thick Continuous Steel Angle<br />
Wire Mesh<br />
100<br />
Bottom Chord<br />
100<br />
Bottom Chord<br />
CANOPY MESH DETAIL - BUILT-UP SECTION<br />
1 : 5<br />
CANOPY MESH DETAIL - BUILT-UP SECTION<br />
1 : 5<br />
2 CANOPY REFLECTOR CONNECTION DETAIL<br />
1 : 5<br />
CANOPY REFLECTOR CONNECTION DETAIL<br />
0 PRELIMINARY TENDER PACKAGE WS MR 05/25/17<br />
Rev Description Apvr Chk'd Date<br />
Client<br />
EXPO 2020 Lehbab Road,<br />
0 PRELIMINARY TENDER PACKAGEDWC South WS MR 05/25/17<br />
Dubai - United Arab Emirates<br />
Rev Description Apvr Chk'd Date<br />
T: +971 4 555 2020<br />
Client<br />
Development Manager<br />
EXPO 2020 Lehbab Road,<br />
Emaar<br />
DWC South<br />
Properties PJSC<br />
P.O.<br />
Dubai<br />
Box<br />
- United<br />
9440,<br />
Arab<br />
Dubai,<br />
Emirates<br />
UAE<br />
T:<br />
T:<br />
+971<br />
+971 4 555<br />
3673333<br />
2020<br />
F: +971 4 3673000<br />
enquiry@emaar.ae<br />
Development Manager<br />
Emaar Properties PJSC<br />
Project Manager<br />
P.O. Box 9440, Dubai, UAE<br />
Turner T: +971 International 4 3673333 Middle East, Ltd.<br />
Turner F: +971 Construction 4 3673000 - International LLC<br />
P.O. enquiry@emaar.ae<br />
Box 13036 - Dubai, UAE<br />
P: +971 4 337 0990<br />
F: +971 4 334 8216<br />
Project Manager<br />
tci.dxb@tcco.com<br />
Turner International Middle East, Ltd.<br />
Turner Construction - International LLC<br />
Local Consultant<br />
P.O. Box 13036 - Dubai, UAE<br />
Floor P: +971 2, Hassanicor 4 337 0990 Building, Al Barsha First<br />
P.O. F: +971 Box 4454801, 334 8216Dubai, UAE<br />
T: tci.dxb@tcco.com<br />
+971 4 399 4788<br />
F: +971 4 399 4780<br />
rpedubai@emirates.net.ae<br />
Local Consultant<br />
Floor 2, Hassanicor Building, Al Barsha First<br />
Design Architect<br />
P.O. Box 454801, Dubai, UAE<br />
T: +971 4 399 4788<br />
637<br />
F: +971<br />
West<br />
4<br />
27th<br />
399 4780<br />
Street<br />
New<br />
rpedubai@emirates.net.ae<br />
York, New York 10001<br />
T: +01 212.693.3600<br />
Design Architect<br />
637 West 27th Street<br />
New York, New York 10001<br />
T: +01 212.693.3600<br />
Parcel IDE / Community<br />
5219784 / Madinat Al Mataar<br />
Project Title<br />
Parcel IDE / Community<br />
EXPO2020 SUSTAINABILITY PAVILION<br />
5219784 / Madinat Al Mataar<br />
Project Adress<br />
Drawing Project Title Title<br />
EXPO2020 SUSTAINABILITY PAVILION<br />
EVENT<br />
Project Adress<br />
C144200<br />
Drawing Title<br />
20 EXPO 2020 DUBAI | SUSTAINABILITY PAVILION<br />
20 EXPO 2020 DUBAI | SUSTAINABILITY PAVILION