SA_VOL2 EMPLOYED

인접한 모듈의 짧은 변은 이전 모듈의 1/3위치에서 시작하게 됩니다. 현재의 짧은 변 시점을 기준으로 위쪽으로 얼마만큼의 공간이 있는지 확인을 합니다.
IMAGE REF IMAGE : c004.jpG REF IMAGE : c004.jpG REF : c004.jpG IMAGE REF IMAGE : c005.jpG REF IMAGE : c005.jpG REF : c005.jpG IMAGE REF IMAGE : c006.jpG REF IMAGE : c006.jpG REF : c006.jpG
B
B
B
11’-2 5/8”
11’-2 5/8”
11’-2 5/8”
A
A
Move the line as defined by the tiling
pattern (parallelogram).
Move the line as defined by the tiling
pattern (parallelogram).
Move the line as defined by the tiling
pattern (parallelogram).
Divide longer edge of the parallelogram
by 3. The point shown in
yellow becomes a new starting point
for Divide the longer following edge row. of the parallelogram
by 3. The point shown in
yellow becomes a new starting point
for Divide the longer following edge row. of the parallelogram
by 3. The point shown in
yellow becomes a new starting point
for the following row.
A
Compare the length of two segments
to check if there is enough space for
another parallelogram to fit in.
Compare the length of two segments
to check if there is enough space for
another parallelogram to fit in.
Compare the length of two segments
to check if there is enough space for
another parallelogram to fit in.