ABT20PANEL_I_E_No1_9720342
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
6. Screen C displays and their descriptions<br />
2 Call the numbers of the<br />
parameters required.<br />
P ○<br />
S1 ○<br />
S2 ○<br />
▲ □<br />
▼ □<br />
表 示<br />
□ T ▲ □<br />
P<br />
□ R ▼ □<br />
D<br />
3 Use these buttons to<br />
enter the setting values.<br />
1: ABT ON<br />
■<br />
1 Call screen C using<br />
these buttons.<br />
Press P.<br />
Press P.<br />
Press P.<br />
Press P.<br />
Press P.<br />
C01 6000 RPM<br />
SEWING SPEED<br />
C02 6500 RPM<br />
CHAIN SPEED<br />
C03 ON ON/OFF<br />
CHAIN SPEED ON<br />
C04 000 STITCH<br />
MESH COUNTER<br />
C05 OFF ON/OFF<br />
REAR BT ON/OFF<br />
C06 005 STITCH<br />
REAR BT START<br />
Sewing speed<br />
Chaining off speed<br />
(Only when parameter C03 has been set to ON)<br />
Chaining off speed selection<br />
ON: The machine runs at the speed set using parameter C01.<br />
OFF: The machine runs at the speed adjusted by the pedal.<br />
To prevent malfunction of the thread tension releaser,increase the value when<br />
sewing the mesh or lace material.<br />
Switching to backtacking at the end of sewing<br />
ON: Simple backtacking work at the end of sewing<br />
Number of stitches until the machine stops when backtacking at the end of sewing<br />
Press P.<br />
Shown below are the CS (condensed stitch device) option specifications.<br />
Press P.<br />
Press P.<br />
Press P.<br />
Press P.<br />
Press P.<br />
Press P.<br />
Press P.<br />
Press P.<br />
C07 OFF ON/OFF<br />
FRONT CS ON<br />
C08 005 STITCH<br />
FRONT CS START<br />
C09 010 STITCH<br />
FRONT CS LENGTH<br />
C10 OFF ON/OFF<br />
REAR CS ON<br />
C11 015 STITCH<br />
REAR CS START<br />
C12 010 STITCH<br />
REAR CS LENGTH<br />
C13 010 STITCH<br />
MAN. CS LENGTH<br />
C14 010 TIMER<br />
PF 1 DOWN TIMER<br />
C15 010 TIMER<br />
NEEDLE UP DELAY<br />
CS ON/OFF at the beginning of sewing<br />
Number of stitches until CS works at the beginning of sewing<br />
Number of stitches required by CS at the beginning of sewing<br />
CS ON/OFF at the end of sewing<br />
Number of stitches until CS works at the end of sewing<br />
Number of stitches required by CS at the end of sewing<br />
Number of stitches required by CS when operated manually<br />
Time until the presser foot moves down after the fabric has been placed<br />
underneath it when auto presser foot liftup has been set (valid only when<br />
parameter A04 has been set to ON)<br />
Adjust the time until the needle raise the highest point after thread chain blow<br />
back is completed. (Time adjustment)<br />
6