Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
84<br />
Recommended Uses:<br />
Splash Zone coating is a special polyamide epoxy<br />
mastic designed for use on those areas of marine<br />
structures and pipelines which cannot be maintained<br />
effectively with conventional coatings or cathodic<br />
protecton.<br />
• Repair underwater pipelines<br />
• Repair pilings or bracings<br />
• Repair water line structures and retaining walls<br />
Many years of service around the world confirm the<br />
effectiveness of this product as a corrosion<br />
barrier.<br />
P/N: SPLASH ZONE<br />
<strong>Divers</strong> <strong>Supply</strong>, <strong>Inc</strong>.<br />
Phone: 888-221-8120 • Fax: (504) 392-3920<br />
www.diverssupplyinc.com<br />
Pipe/Leak Repair<br />
Syntho-Glass Pipe Repair Kits<br />
Syntho-Glass repair kits are designed for applications repairing cracked or broken<br />
pipes under pressure of up to 60 psi and 4" in diameter. There is no need to turn off<br />
your system. Permanent repairs can be made quickly and cost effectively.<br />
Can effectively repair damage to PVC, copper, ceramic, fiberglass, concrete, and most<br />
metals, plastics and rubbers.<br />
Syntho-Glass can be used underwater by divers and is one of the best products around<br />
for pipe repair.<br />
Part Numbers:<br />
Syntho-Glass 2” x 5’ - SG25 Syntho-Glass 3” x 9’ - SG39<br />
Syntho-Glass 4” x 15’ - SG415 Syntho-Glass 4” x 20’ - SG420<br />
Syntho-Glass 4” x 50’ - SG450 Syntho-Glass 6” x 50’ - SG650<br />
Syntho-Glass 8” x 50” - SG850<br />
To figure out how much Syntho-Glass you need:<br />
3.14 x diameter of pipe<br />
width of Syntho-Glass<br />
Please call for other products from the<br />
manufacturers of Syntho-Glass.<br />
Splash Zone<br />
© 2012 <strong>Divers</strong> <strong>Supply</strong>, <strong>Inc</strong>.<br />
x number of layers required x length of pipe = ft. req’d.<br />
• Formulated for underwater application<br />
• Cures in fresh or salt water<br />
• 100% solids epoxy<br />
• Excellent cathodic disbondment<br />
• Excellent water resistance<br />
• Effective corrosion barrier<br />
• Excellent chemical and solvent resistance<br />
Specification Data:<br />
Coating type: Epoxy polyamide<br />
Packaging: 2 gallon, 2 component kits<br />
Gloss: Semi-gloss<br />
Color: Aluminum grey<br />
Component ratio: 1:1<br />
Flash point: None<br />
Thinner: None<br />
Pot life: 1 hour at 77 °F<br />
Shelf life: 1 year<br />
Density: 13.4 lb/gallon<br />
VOC: 0<br />
Temperature resistance: 325 °F, Dry<br />
180 °F, Wet<br />
Recommended film thickness: 250 mils