KA-BestPractices
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Foil Stamping Guidelines<br />
Recommendations to improve the outcome of your project.<br />
Dielines will not be generated for the die maker<br />
until the job is printed. Dielines are pulled from<br />
the printed piece so that registration is exactly the<br />
same.<br />
* Inks, varnishes and aqueous coatings must be<br />
compatible.<br />
* Artwork must be supplied to indicate<br />
registration.<br />
* Avoid reversing out areas to be stamped.<br />
* Image to be stamped/embossed must be 3/4”<br />
away from gripper edge of press sheet.<br />
* Fine detail may not stamp or emboss correctly.<br />
Please consult Knight Abbey for verification.<br />
* Please allow 2-3 days to build stamping and<br />
embossing dies to avoid extra charges.<br />
* Please allow 5-7 days for sculptured brass<br />
dies.<br />
* Large, solid areas of foil will have picked off<br />
areas<br />
* Large, solid areas should not stamp over ink<br />
(knock out ink area)<br />
* Digital printing may have problems foil<br />
stamping<br />
* When stamping over digital print, knock out<br />
ink from all but 1/16” to prevent issues<br />
VARIABLE FOIL<br />
Variable foil does not require a die, however<br />
many of the same guidelines remain standard.<br />
If the variable is inline printing with a digital<br />
piece, it cannot have any ink within 1/2" of the<br />
foil and the area behind the variable foil must<br />
be 100% clear...no screens, watermarks or art.<br />
If the piece to be variable foiled is printing on<br />
a shell there can be ink, however the coverage<br />
should never be more than 20% total ink<br />
coverage or the digital ink will not adhere to<br />
the printed shell.<br />
The total size of the printed piece for digital<br />
variable does have limitations.<br />
As with traditional foil, small type and fine<br />
script fonts may not stamp correctly.<br />
Please contact Knight Abbey with any<br />
questions when planning your project.