Processing of Primary Fischer-Tropsch Products - University of Alberta

[ 18] P.G. Smirniotis and W. Zhang, Effect of the Si/A1 ratio and of the zeolite structure on
the performance of dealuminated zeolites for the reforming of hydrocarbon mixtures,
Ind. Eng. Chem. Res., 35 (1996) 3055-3066.
[19] A. de Klerk, Deactivation behaviour of Zn/ZSM-5 with a Fischer-Tropsch derived
feedstock, in S.D Jackson, J.S.J. Hargreaves and D. Lennon (eds), Catalysis in
application, Royal Society of Chemistry, Cambridge, 2003, 24-31.
[20] ASTM DS 4B, Physical constants of hydrocarbons and non-hydrocarbon compounds,
ASTM, Philidelphia, 1988 (2ed).
[21] S.M. Ozmen, H. Abrevaya, P. Barger, M. Bentham and M. Kojima, Skeletal
isomerisation of Ca and Cs olefins for increased ether production, Fuel Reformulation,
3:5(1993) 54-59.
[22] J-L. Duplan, P. Amigues, J. Verstraete and Ch. Travers, Kinetic studies of the skeletal
isomerization of n-pentenes over the ISO-5 process catalyst, Proc. Ethylene Prod. Conf.,
5 (1996) 429-449.
[23] F.M. Floyd, M.F. Gilbert, M. P6rez and E. KOhler, Light naphtha isomerisation,
Hydrocarbon Eng., Sep. (1998) 42-46.
[24] P.J. Kuchar, R.D. Gillespie, C.D. Gosling, W.C. Martin, M.J. Cleveland and P.J. Bullen,
Developments in isomerisation, Hydrocarbon Eng., Mar. (1999) 50-57.
[25] P.W. Tamm, D.H. Mohr and C.R. Wilson, Octane enhancement by selective reforming
of light paraffins, Stud. Surf. Sci. Catal., 38 (1988) 335-353.
[26] T.R. Hughes, R.L. Jacobson and P.W. Tamm, Catalytic processes for octane
enhancement by increasing the aromatics content of gasoline, Stud. Surf. Sci. Catal., 38
(1988) 317-333.
[27] R.L. Peer, R.W. Bennett, D.E. Felch and E. Von Schmidt, UOP Platforming leading
octane technology into the 1990's, Catal. Today, 18 (1993) 473-486.
[28] C. Hodge, Comment: More evidence mounts for banning, not expanding, use of ethanol
in US gasoline, Oil Gas J., 101 6 Oct. (2003) 18-20.
[29] P.C. Weinert and G. Egloff, Catalytic polymerization and its commercial application,
Petroleum Process., Jun. (1948) 585-593.
[30] S.A. Tabak, F.J. Krambeck, and W.E. Garwood, Conversion of propylene and butylene
over ZSM-5 catalyst, AIChE J., 32:9 (1986) 1526-1531.
[31 ] F. Nierlich, Oligomerize for better gasoline, Hydrocarbon Process., Feb. (1992) 45-46.
[32] J-F. Joly, Aliphatic alkylation, in P. Leprince (ed), Petroleum Refining 3: Conversion
Processes, Editions Technip, Paris, 2001,257-289.
[33] M. Golombok and J. De Bruijn, Dimerization of n-butenes for high octane gasoline
components, Ind. Eng. Chem. Res., 39 (2000) 267-271.
[34] S.T. Sie, Acid-catalyzed cracking of paraffinic hydrocarbons. 1. Discussion of existing
mechanism and proposal of a new mechanism, Ind. Eng. Chem. Res., 31 (1992) 1881-
1889.
[35] J.F. Boucher, G. Follain, D. Fulop and J. Gaillard, Dimersol X process makes octenes
for plasticizer, Oil Gas J., 80, 29 Mar (1982) 84-86.
[36] R.H. Friedlander, D.J. Ward, F. Nierlich and J. Neumeister, Make plasticizer olefins via
n-butene dimerisation, Hydrocarbon Process., Feb. (1986) 31-33.
[37] M. Freemantle, Designer solvents, Chem. Eng. News, 30 Mar (1998) 32-37.
[38] E.J. Swain, U.S. MTBE production at a record high in 1998, Oil Gas J., 97:24 (1999)
99-101.
[39] G. Parkinson, All sides pumped up for MTBE ban, CherrL Eng., (Jun 1999) 49.
[40] H. Becker, Process for the manufacture in pure form of 1-pentene or an alpha-olefin
lower than 1-pentene, US patent No. 6 483 000 Nov. (2002).
529