3 Wireless Remote Control CZone LCD QVGA ... - BUKH Bremen
3 Wireless Remote Control CZone LCD QVGA ... - BUKH Bremen
3 Wireless Remote Control CZone LCD QVGA ... - BUKH Bremen
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Battery Distribution<br />
Bat ter y switches on/of f<br />
The 701 Contour Battery Master Switch offers a number of unique<br />
features, the highlight being the patented Contour Locking System,<br />
allowing it to be a stand alone unit, or locked together with other<br />
switches.<br />
The 701 also features a control knob which cannot be removed while<br />
in the ON or OFF position, however, can be removed by switching to<br />
an counter-clockwise 45° position. The control knob also features an<br />
interchangeable labeling system allowing a full range of applications (Part<br />
number 713 or 715: page 74).<br />
The 701 also features removable side plates on 4 sides for access of up to<br />
1/0 cables plus a rear cover insulating the rear terminals against any short<br />
circuits. This ensures the switch meets ABYC requirements.<br />
The 701 can be either surface or recess mounted by cutting a 52 mm hole<br />
(2.1 in)<br />
The 721 Heavy Duty Battery Switch fits into the same contour lock system<br />
as used on the battery distribution system. Rated at 600 A continuous and<br />
2500 A cranking. It is well suited to larger vessels.<br />
As with the 701, the 721 can be recessed or surface mounted. The 721 uses<br />
the same style of self cleaning sliding contact as used in the 701 and uses the<br />
same label sheet (part number 713 or 715 refer page 74).<br />
BEP’s patented Contour Locking System is an<br />
innovative feature that allows for multiple battery<br />
management components to be connected to each<br />
other providing for a clean finished installation.<br />
These locking tabs can be found on battery<br />
switches, heavy duty buss bars, fuse holders,<br />
distribution studs and breaker modules.<br />
Specifications - All recessed or surface mount, tin-plated copper studs & nuts, ignition-protected<br />
Part No. mm<br />
in<br />
Rating (A DC) Voltage Operation Stud size<br />
L x W x H L x W x H Continuous Intermittent Cranking (V DC)<br />
[Studs x (mm / in)]<br />
700 68 x 68 x 110 2.7 x 2.7 x 4.3 275 455 1250 48 On/Off 2 x (10 / 3/8)<br />
701 69 x 69 x 75 2.75 x 2.75 x 3 275 455 1250 48 On/Off 2 x (10 / 3/8)<br />
701S 69 x 69 x 75 2.75 x 2.75 x 3 200 300 1000 48 1-2-Both-Off 3 x (8 / 5/16)<br />
720 102 x 102 x 90 4 x 4 x 3.5 600 800 2500 48 On/Off 2 x (12 / 1/2)<br />
720-DP 102 x 102 x 90 4 x 4 x 3.5 400 525 1500 48 On/Off 2 poles 4 x (12 / 1/2)<br />
721 102 x 102 x 90 4 x 4 x 3.5 350 500 1500 48 1-2-both-Off 3 x (10 / 3/8)<br />
44 LEADING ELECTRICAL DESIGN<br />
720<br />
701