3 Wireless Remote Control CZone LCD QVGA ... - BUKH Bremen

Battery Distribution
Panel-mounted switches; mounting plates
The panel mount range of battery
switches are designed specifically
for panel mount applications.
This range gives a very compact,
versatile solution.
Range HigHligHts
Compact, lightweight
Same specifications as model 701
and 701S (see pages 44 and 45)
Removable key on 701-PM
Countersunk recesses for surface
mount application
Standard 52 mm (2 1 /16 in) hole cut
out (same as standard gauge hole)
Inside: captive inserts for 4.8 mm
( 3 /16 in) nuts; full access for cables -
no restrictions
Standard BEP interchange label
system (page 74)
BSPL-1
701S-PM
With the growing number of
builders installing BEP battery
switches in panels greater than
10 mm (3/8 inch) thickness,
BEP realized the need to supply
simple mounting plates for
Mounting Plates for Battery Switches
For Part No. mm
in Description
L x W L x W
701 BSP-1 95 x 95 3.75 x 3.75 Single recessed
BSPL-1 170 x 170 6.75 x 6.75 Single recessed
720 BSPL-2 170 x 273 6.75 x 10.75 Dual recessed
BSPL-3 170 x 379 6.75 x 14.9 Triple recessed
As shown in Contour Connect panels
46 LEADING ELECTRICAL DESIGN
single or multiple switches in
our small and large battery
switch ranges. These are
supplied with all the mounting
hardware and come in a
matching grey finish.
701-PM
701 Battery Switch
Accessory
For applications where emergency
parallel switch needs to be highlighted.
Ordered separately - replaces existing
knob.
BSP-1 701-KEy-EP