A C 2 x screw Ř B - BiERBACH GmbH & Co. KG Befestigungstechnik

bierbach

A C 2 x screw Ř B - BiERBACH GmbH & Co. KG Befestigungstechnik

The perfect connection

by

Production programm

Fastening technique

Innovative planning

Modern technology

DQS certified as per

DIN EN ISO

9001:2000


Fastening Technique

The company

BiERBACH ® was founded in 1855 in Altena, a village

situated in the Sauerland region. Today the headquarters

are in Unna. With a qualified staff of 200 employees

and an annual production of almost 10.000 tons

of fixing products BiERBACH ® has become one of the

leading manufacturers in its branch.

With over 140 years in the market place and the consequently

gained experience, combined with a user

orientated company philosophy, BiERBACH ® clientele

are ensured a reliable and efficient partner.

BiERBACH ® has proved this yet again by being one

of the first companies of its branch to have its quality

management system certified to DIN EN ISO 9001:

2000

Research and Production

BiERBACH ® products are developed in close connection

with users, architects and design engineers.

Customer requirements and requests are given top

priority at BiERBACH ® right from the first contact

with the BiERBACH ® research team via the subsequent

stages of construction on CAD upto to the first

sample presentation.

The subsequent series production processing, in

each of the three different manufacturing divisions for

wire, sheet metal and plastic, is accomplished on

time-and power saving computer controlled production

units ensuring a constant high level of quality.

For all of the BiERBACH ® products the highest level

of raw material quality and production precision is

demanded: Our in-house materials laboratory controls

for example, the structural texture and the

strengths of the used semi-finished goods, and optical

devices ensure the accuracy of size allowing for a

100% fault separation.

R

The Range

More than 5000 different products, made of metal

and plastic materials, encompass the BiERBACH ®

range, developed for various fields of applications.

It offers the most simple skirting pin through to complex

timber connectors with calculated design values

that are officially approved by Building Control Authorities

and classified to DIN 1052 part 2.

It satisfies the requirements of the professional as

well as the private DIY end user.

The continuous research to adapt the products to the

changing market requirements is not an annoying

obligation but in fact a natural part of the BiERBACH ®

philosophy.

The experience of many years, the profound knowhow

and the most modern and extensive technical

equipment, help to put alI of this into practice, allowing

the company to be flexible to demands and to

respond quickly to necessities imposed by new targets.

All production programms are completed by accessories

of reknown manufacturers in order to offer a

complete fastening system to the user.

Distribution and Service

A nation-wide distribution system and a well-organised

net of sales representatives attend to the qualified

dealer. Besides the professional advice for the

customer great emphasis is put on an attractive and

clear presentation of products through standardised

merchandising systems.


The perfect connection

Powder Actuated

Fastening

Technology Production programm

Innovative Systems

for the Building Trade

for direct fastenings on concrete and masonry works without drilling

50 Powder Actuated Fastening Technology


Fastening Technique

cable assembly clamps, casing spacers,

casing nails, magazined casing nails,

temporary fasteners, merchandisers,

accessories.

R

Powder Actuated Fastening

Technology

Production programm

10

Powder actuated tool »Bimatic 42«,

universal, powder actuated tool

»Bimatic 72«, universal, powder actuated

tool »Bimatic 42« for insulation fastening,

powder actuated tool »Bimatic 72« with

fastener magazine, insulation sheet

anchors, twin conduit clip assemblies,

conduit clip assemblies, foil fasteners,

threaded studs M6, threaded studs M8,

cable/pipe clamps, cartridges, drive pins,

magazined drive pins, washer drive pins,

Befestigungstechnik


Index

A

Annual spring 50.14,15

Application chart of fasteners 50.4,5

B

Barrel 42 50.6

Barrel 42/2 50.12

Barrel 42/3 50.14

Barrel 72 50.7

Barrel group 72/1 for standard

applications 50.7

Barrel group 72/3 for fastener

magazines 50.15

Barrel group LB 42/1 for standard

applications 50.6

Barrel group LB 42/2 for insulation

fastening 50.6

Barrel group LB 42/3 for magazined

fasteners 50.6

Barrel sleeve 42 50.6

Barrel sleeve 42/2 50.12

Barrel sleeve 72 50.7

C

Cable assembly clamps 50.10

Cable clamps 50.10

Cartridges 50.6,7,12,14,15,16,18

Casing nails 50.9,18

Casing nails, magazined 50.16

Casing spacer 50.8

Cleaning brush 50.6,7

Cleaning cloth 50.6,7,12,14,15

Cleaning spray 50.6,7

Clips 50.9

Conduit clip assemblies,

single + twin 50.9

D

Drive pins 50.8,17,18

Drive pins magazined 50.16

E

Ejection rod 50.6,7,12,14,15

F

Foil fasteners 50.10

I

Insulation sheet anchors 50.13

M

Magazine device 42 50.14

Magazine device 72 50.15

Magazined casing nails 50.16

Magazined drive pins 50.16

Merchandisers 50.18

P

Piston 42 50.6

Piston 42 M8 50.6

Piston 42/2 50.12

Piston 72 50.7

Piston 72 M8 50.7,11

Powder actuated tool »Bimatic 42«

for insulation fastening 50.12

Powder actuated tool »Bimatic 42«

with fastener magazine 50.14

Powder actuated tool »Bimatic 42«,

universal 50.6

Powder actuated tool »Bimatic 72«

with fastener magazine 50.15

Powder actuated tool »Bimatic 72«,

universal 50.7

R

Return spring 42 50.6

Return spring 72 50.7

T

Temporary fasteners 50.9

Threaded studs M6 50.8,17,18

Threaded studs M8 50.11

W

Washer drive pins 50.10,18

Wrench 13 mm 50.6,7,12,14,15

Powder actuated

fastening technology


Fastening Technique

Direct fastening with powder actuated tools has been in use with

excellent results for many years. Many users value the dependability

and speed with which high-quality fastenings can be produced.

Of critical importance for troublefree working with direct fastening

systems is the correct choice of components: powder actuated tool,

fastener and cartridge.

BiERBACH ® powder actuated tools satisfy all standard safety

requirements. They have been tested and approved by the German

Institute of Physics and Metrology (PTB). This is documented on the

tools by a mark of approval. The following features

underline the high safety standards of BiERBACH ®

powder actuated tools.

● Piston Principle

In BiERBACH ® powder actuated tools the power of the cartridge

does not act directly on the fastener, but on a piston. The energy

released on ignition of the cartridge is first transferred to the

piston. The piston hits the fastener and drives it into the work

surface. The path of the piston in the tool is limited. If not all the

cartridge energy is used up for when driving a fastener into the

work surface, the piston in the tool is intercepted and the excess

energy is dissipated. Penetration through the work surface and

ricochets of the tool are therefore largely prevented.

● Trigger Protection

The trigger protection of BiERBACH ® powder actuated tools

prevents unintentional firing of the tool. Ignition is only possible if

the tool is pressed against a work surface with a force of at least

50 N and the trigger is pressed.

50.2

R

No danger of penetration through the

work surface thanks to the piston

principle

Direct Fastening

Technical Information

● Fall Protection

The sturdy construction of the tool guarantees it will not ignite

even if it is dropped on to a hard surface from a height of

3 metres.

● Noise Insulation

The noise of the cartridge on ignition is reduced substantially by

the special construction of BiERBACH ® powder actuated tools.

Users and the environment are protected.

● Repeat inspection

According to § 15 (1) of the German Third Weapons Order,

powder actuated tools sold and used in Germany must be

returned to the manufacturer for repeat inspection every two

years. The date of the last inspection is shown on a plaque on

the tool.

The number in the middle of the plaque indicates the year and

the triangle on the setting-direction side the quarter of the last

inspection.

3

● Examples of fastening

1

04

4

Setting direction

2

Example: The next inspection is due in

the 3rd quarter of 2006.


Direct Fastening

General Application

Information Technical Information

● Building Materials

Powder actuated tools can be used on the following

materials:

Concrete, minimum Bn 250, minimum thickness 10 cm

– Structural steel, maximum 450 N/mm 2 , minimum thickness 6 mm

– Solid stone masonry (conditional)

● The following materials are unsuitable for use of powder actuated

tools because they are either too hard or too soft:

– AII hardened steels, spring steels, cast iron, welded seams and

similar materials

– Glazed or fired brick, ceramic, glass, natural stone and similar

materials

– Lightweight concrete, plasterboard, pumice, wood and similar

materials

● Examination of the Building Material

Place the fastener on the building material and hit the head of the

fastener several times with a hammer. The building material is

suitable if the surface shows a clear imprint of the tip of the

fastener and the tip is not damaged. If, however, the building

material breaks or cracks or the fastener has already penetrated

into the material, then it is unsuitable.

● Tips on the choice of fasteners and cartridges

Fastening on concrete

The optimum penetration depth of the fastener is about

25 to 35 mm.

Distance from the open edges: at least 10 cm.

Spacing between the fastenings:

at least twice the penetration depth.

Concrete strengths of more than 60 N/mm 2 are not suitable for

powder fastenings.

Fasteners may not be driven into prestressed concrete.

Choice of Fasteners

Penetration depth + thickness of the building material = necessary

shank length.

Fastening on Steel

The penetration depth of the fastener should be about

10 to 15 mm. With higher steel strengths also material thickness is

of influence.

Pay attention to the limitations of usage!

Distance from the open edges: at least 2.5 times the shank

diameter. Spacing between the fastenings: at least 8 times the

shank diameter.

Selection of Cartridge

As a matter of principle: a trial fastening should always be carried

out using the weakest cartridge or the lowest level of power on the

tool. Then adjust the load of the cartridge and/or the level of the

power on the tool to achieve the correct penetration depth.

Excess energy strains the interception device and will damage the

tool in the long run.

Increase the

load of the

cartridge or

choose a

shorter fastener

Correct

cartridge

strength

Reduce the

load of the

cartridge or

choose a

longer fastener

50.3


Fastening Technique

Item Item no.

50.4

R

Bimatic 42/1

Application chart of fasteners

for BiERBACH ® Powder actuated tools

and other brands

cartridges 6,8/11, magazined 030 101 - 103 X X X X X X X X X X X X X X X X X

drive pins 031 012 - 042 X X X X X X X X

drive pins 031 047 X X X X X X X

drive pins 031 052 - 097 X X X X X X

casing nails 031 447 X X X X X X X

casing nails 031 454 - 472 X X X X X X

drive pins with washer 031 827 - 832 X X X X X X X X

drive pins with washer 031 852 X X X X X X

drive pins with washer 031 927 - 932 X X X X X X X X

drive pins with washer 031 952 X X X X X X

casing spacers 032 057 X X X X X X

conduit clip assemblies 032 113 - 140 X X X X X X X X

twin conduit clip assemblies 032 216 - 240 X X X X X X X X

cable/pipe clamps 032 308 - 316 X X X X X X X X

cable assembly clamps 032 415 - 430 X X X X X X X X

foil fastener 032 637 X X X X X X X X

foil fastener 032 647 X X X X X X X

foil fastener 032 662 X X X X X X

* tool equipment to be observed ** registered trademark of Hilti AG, Schaan

Bimatic 42/2

Bimatic 42/3

Bimatic 42 M8

Bimatic 72/1

Bimatic 72/3

Bimatic 72 M8

BiERBACH ® -beto 400 LB 1, BSG II

BiERBACH ® -beto 400 LB 2, BSG II M8

BiERBACH ® -beto 400 LB 3, BSG II DPH

BiERBACH ® -beto 400 LB 4, BSG II Mag.

beto 200, BSG 200

beto 201, BSG 201

Hilti** DX A 40

Hilti** DX A 41

Hilti** DX 36 M

Hilti** DX 450


Application chart of fasteners

for BiERBACH ® Powder actuated tools

and other brands

Item Item no.

Powder actuated

fastening technology

foil fastener 032 737 X X X X X X X X

foil fastener 032 747 X X X X X X X

foil fastener 032 762 X X X X X X

temporary fastener 032 822 - 832 X X X X X X X X

insulation sheet anchor 032 900 - 980 X X* X* X*

Bimatic 42/1

drive pin with steel washer 033 016 - 097 X

drive pins, magazined 034 016 - 019 X X X X

drive pins, magazined 034 022 - 032 X X X X X

drive pins, magazined 034 037 - 042 X X X X

drive pins, magazined 034 047 - 062 X X X

drive pins, magazined 034 072 X X

casing nails, magazined 034 147 - 162 X X X

threaded studs M 6 041 012 - 032 X X X X X X X X

threaded studs M 6 041 042 X X X X X X X

threaded studs M 8 041 114 - 132 X X X X X X X X

threaded studs M 8 041 152 X X X X X X X

threaded studs M 6 041 212 -242 X

threaded studs M 8 041 314 -352 X

* tool equipment to be observed ** registered trademark of Hilti AG, Schaan

Bimatic 42/2

Bimatic 42/3

Bimatic 42 M8

Bimatic 72/1

Bimatic 72/3

Bimatic 72 M8

BiERBACH ® -beto 400 LB 1, BSG II

BiERBACH ® -beto 400 LB 2, BSG II M8

BiERBACH ® -beto 400 LB 3, BSG II DPH

BiERBACH ® -beto 400 LB 4, BSG II Mag.

beto 200, BSG 200

beto 201, BSG 201

Hilti** DX A 40

Hilti** DX A 41

Hilti** DX 36 M

Hilti** DX 450

50.5


Fastening Technique

Fastening of wood laths setting of cable clamps

50.6

New

Line

New

Line

000 543

000 544

000 540

R

000 542

000 545

Powder actuated tool

upto 42 mm drive pin length

Cartridges

BiERBACH ® Powder actuated tool

type »Bimatic 42«, universal

Non-repetitive powder actuated tool technology; quick - safe - easy to handle

Light universal tool for all drive pins upto 42 mm shank length, sturdy

built and easy to use. Equipped with barrel group LB 42/1 for basic

applications. In a tool case complete with cleaning cloth, cleaning spray,

brush, safety googles, wrench, ejection rod.

Technical data:

Weight: 2,3 kg

Length of tool 375 mm

Cartridges: calibre 6.8/11, magazined

Load: red, yellow, green

The BiERBACH ® -Powder actuated tool type »Bimatic 42« has been

tested and approved by th PTB in accordance with § 21 of the German

Weapons Act.

Equipment:

Barrel group LB 42/1, barrel Ø 8,5, for all standard applications.

• Barrel 42

• Barrel sleeve 42

• Piston 42

• Return spring 42

Item type contents item x

no. group each

000 540 BiERBACH ® -Bimatic 42 complete 1 16

000 541 Barrel group LB 42/1 for standard applications 1 16

000 542 Barrel 42 1 16

000 543 Barrel sleeve 42 1 16

000 544 Piston 42 1 16

000 545 Return spring 42 1 16

000 594 Piston 42 M 8 1 16

000 390 Cleaning spray 1 16

000 391 Cleaning brush 1 16

000 392 Cleaning cloth 1 16

000 393 Ejection rod 1 16

000 523 Wrench 13 mm 1 16

Tool leasing for the professional trade possible.

BiERBACH ® -Powder actuated tool type »Bimatic 42«

can be equipped with other barrel groups:

• LB42/2 for insulation fastenings (see page 50.12)

LB42/3 for magazined fasteners (see page 50.14)


BiERBACH ® -cartridges, magazined

Calibre 6.8/11, magazined:

suitable for BiERBACH ® -Bimatic 42 and BiERBACH ® -Bimatic 72

item colour load contents item x

no. group 100 pcs

030 101 green weak 100 17

030 102 yellow medium 100 17

030 103 red very strong 100 17

For use with tools of other makes see pages 50.4 + 50.5


Powder actuated tool

Cartridges

Fastening of casing spacers Fastening of cable conduits

BiERBACH ® Powder actuated tool

type »Bimatic 72«, universal

Non-repetitive powder actuated tool technology; quick - safe - easy to handle

Versatile universal tool for light to medium strong fastenings with all

fastener lengths, sturdy built and easy to use. Equipped with barrel group

72/1 for basic applications. In a tool case complete with cleaning cloth,

cleaning spray, brush, safety googles, wrench, ejection rod.

Technical data:

Weight: 2,6 kg

Length of tool 430 mm

Cartridges: calibre 6.8/11, magazined

Load: red, yellow, green

The BiERBACH ® -Powder actuated tool type »Bimatic 42« has been

tested and approved by th PTB in accordance with § 21 of the German

Weapons Act.

Equipment:

Barrel group LB 72/1, barrel Ø 8,5, for all standard applications.

• Barrel 72

• Barrel sleeve 72

• Piston 72

• Return spring 72

Item type contents item x

no. group each

000 570 BiERBACH ® -Bimatic 72 complete 1 16

000 571 Barrel group LB 72/1 for standard applications 1 16

000 572 Barrel 72 1 16

000 573 Barrel sleeve 72 1 16

000 574 Piston 72 1 16

000 575 Return spring 72 1 16

000 595 Piston 72 M 8 1 16

000 390 Cleaning spray 1 16

000 391 Cleaning brush 1 16

000 392 Cleaning cloth 1 16

000 393 Ejection rod 1 16

000 523 Wrench 13 mm 1 16

Tool leasing for the professional trade possible.

The BiERBACH ® -Powder actuated tool type »Bimatic 72«

can be equipped with other barrel groups:

• LB72/3 for magazined fasteners (see page 50.15)

BiERBACH ® -cartridges, magazined

Calibre 6.8/11, magazined:

suitable for BiERBACH ® -Bimatic 42 and BiERBACH ® -Bimatic 72

Item colour load contents Item x

no. group 100 pcs

030 101 green weak 100 17

030 102 yellow medium 100 17

030 103 red very strong 100 17

For use with tools of other makes see pages 50.4 + 50.5

New

Line

New

Line

Powder actuated

fastening technology

000 573

000 574

000 570

000 572

000 575

50.7


Fastening Technique

50.8

R

Fastening of cable conduits Fastening of casing spacers Fastening of wood battens

Ø 8,5

Ø 8,5

Ø 8,5

Ø 8,5

L

11

L

57

Standard applications

Fastener programm

BiERBACH ® -drive pins

For fastenings on steel with maximum tensile strength of 450 N/mm 2 and concrete

Item shank shank-Ø head-Ø nylon washer contents Item x

no. length mm mm mm Ø mm group 100 pcs.

Steel, galvanized; boxed

High quality special pin for fastenings on steel, knurled

031 012 12 3,7 8,5 8,5 100 18

031 016 16 3,7 8,5 8,5 100 18

031 019 19 3,7 8,5 8,5 100 18

Steel, galvanized; boxed

For fastenings on steel an concrete.

For fastenings on concrete of higher strength use shorter and on

softer concrete longer pins.

Suitable for BiERBACH ® -tools as per pages 50.4 + 50.5

031 022 22 3,7 8,5 8,5 100 18

031 027 27 3,7 8,5 8,5 100 18

031 032 32 3,7 8,5 8,5 100 18

031 037 37 3,7 8,5 8,5 100 18

031 042 42 3,7 8,5 8,5 100 18

031 047 47 3,7 8,5 8,5 100 18

031 052 52 3,7 8,5 8,5 100 18

031 057 57 3,7 8,5 8,5 100 18

031 062 62 3,7 8,5 8,5 100 18

031 067 67 3,7 8,5 8,5 100 18

031 072 72 3,7 8,5 8,5 100 18

031 082 82* 3,7 8,5 8,5 100 18

031 097 97* 3,7 8,5 8,5 100 18

* Pre-penetration with a hammer.

Kindly note: BiERBACH ® -Profi-pac on page 50.18.

BiERBACH ® -threaded studs M6

For fastenings on steel with maximum tensile strength of 450 N/mm 2 and concrete.

Item shank shank-Ø thread nylon/steel- contents Item x

no. length mm mm length mm washer Ø mm group 100 pcs.

Steel, galvanized; boxed

High quality special pin for fastenings on steel, knurled

041 012 12 3,7 11,0 8,5 100 18

Steel, galvanized; boxed

For fastenings on concrete; for fastenings on concrete of higher strength

use shorter and on softer concrete longer pins.

041 022 22 3,7 11,0 8,5 100 18

041 027 27 3,7 11,0 8,5 100 18

041 032� 32 3,7 11,0 8,5 100 18

041 042� 42 3,7 11,0 8,5 100 18

� If not in stock production possible for economical order quantities.

BiERBACH ® -casing spacer

For fixing of system and wood casings, suitable for all wall thicknesses.

Allows fast and accurate settings, wood walls thicknesses cut-to-size not

necessary.

Item shank spacer contents Item x

no. length mm Ø mm group 100 pcs.

Pre-assembled with drive pin

Suitable for BiERBACH ® -tools as per pages 50.4 + 50.5

032 057 57 8,5 100 18

For use with tools of other makes see pages 50.4 + 50.5


Standard applications

Fastener programm

BiERBACH ® -casing nails

With pre-set breaking point, for fastening of casing wood that will be

removed again. Small head facilitates removal of the wood, controlled

breaking of nail shank on pre-set breaking point. L

Item shank shank-Ø casing nylon washer contents Item x

no. length mm mm thickness Ø mm group 100 pcs.

Steel, galvanized; boxed

Suitable for BiERBACH ® -tools as per pages 50.4 + 50.5

031 447 47 3,7 22 8,5 100 18

031 454 54 3,7 29 8,5 100 18

031 462 62 3,7 38 8,5 100 18

031 472 72 3,7 47 8,5 100 18

Please note: BiERBACH ® -Profi-pac on page 50.18.

BiERBACH ® -temporary fastener

For temporary fastenings of metal sheets, profiles, conduits, covers,

pipes (e.g. with conduit clips) and similar objects on concrete.

Thanks to the pre-set breaking point, the fastened objects can be

removed quickly and without damage.

Item shank shank-Ø head-Ø nylon washer contents Item x

no. length mm mm mm Ø mm group 100 pcs.

Steel, hardened, blue finish; boxed

032 822� 22 3,7 8,5 8,5 100 18

032 827� 27 3,7 8,5 8,5 100 18

032 832� 32 3,7 8,5 8,5 100 18

BiERBACH ® -conduit clips

Pre-assembled with drive pins. Extra large surface for secure pressure

and optimum contact with the construction material.

For fastenings in the electric and sanitary field.

Item shank for pipe nylon washer contents Item x

no. length mm Ø mm Ø mm group 100 pcs.

Steel, galvanized; boxed

032 113 27 12-13 8,5 100 18

032 116 27 15-16 8,5 100 18

032 118 27 17-18 8,5 100 18

032 120 27 19-20 8,5 100 18

032 122 27 21-22 8,5 100 18

032 124 27 23-24 8,5 100 18

032 128 27 27-28 8,5 100 18

032 135 27 34-35 8,5 100 18

032 140 27 39-40 8,5 100 18

BiERBACH ® -twin conduit clips

Pre-assembled with drive pins. Extra large surface for secure pressure

and optimum contact with the construction material.

For fastenings in the electric and sanitary field.

Item shank for pipe nylon washer contents Item x

no. lenght mm Ø mm Ø mm group 100 pcs.

Steel, galvanized; boxed

032 216 27 15-16 8,5 100 18

032 218 27 17-18 8,5 100 18

032 220 27 19-20 8,5 100 18

032 222 27 21-22 8,5 100 18

032 224 27 23-24 8,5 100 18

032 228 27 27-28 8,5 100 18

032 235 27 34-35 8,5 100 18

032 240 27 39-40 8,5 100 18

For use with tools of other makes see pages 50.4 + 50.5

� If not in stock production possible for economical order quantities.

Ø 8,5

L

Ø 8,5

Rohr

Ø mm

Rohr

Ø mm

Ø 8,5

Ø 8,5

27

Powder actuated

fastening technology

27

Conduit fastening with conduit clips

50.9


Fastening Technique

Fastening of cable clamps

50.10

R

Ø 30+60

Ø 8,5

L

L

Standard applications

Fastener programm

BiERBACH ® -cable assembly clamps

Pre-assembled with drive pin, length 42 mm, colour: similar to RAL 7035

Optimum fastening possibilities for mountings on walls and ceilings. Easy

opening and closing due to special locking system. Successiv adding of

more cables without problem. Extremly high strength. Can be fastened

without mounting plate.

Item fo cable quantity contents Item x

no. (NYM 3 x 1,5 mm 2 ) group 100 pcs.

Polyprophylene, halogen and silicon-free; boxed

032 415 � cable assembly clamp, small 15 50 18

032 430 � cable assembly clamp, large 30 50 18

Flame-resistent execution possible for economical order quantities.

� If not in stock production possible for economical order quantities.

BiERBACH ® -cable clamps

Pre-assembled with drive pin, length 42 mm, colour: similar to RAL 7035

For installation of cables on concrete ceilings and walls. To be mounted

with powder actuated tool.

Item fo cable quantity contents Item x

no. (NYM 3 x 1,5 mm 2 ) group 100 pcs.

Polyamide, halogen and silicon-free; boxed

032 308 � large, one wing 8 100 18

032 310 � small, two wings 10 100 18

032 316 � large, two wings 16 50 18

Flame-resistent execution possible for economical order quantities.

� If not in stock production possible for economical order quantities.

BiERBACH ® -foil fasteners

Pre-assembled with drive pin.

For fastening of foils, nets, protective insulation coverings, knobbed

sheeting, exterior wall coverings, wood and plastic boards and similar

material upto 20 mm thickness maximum on concrete and masonry.

• Prevents damaging of the material to be fastened

• Adapts to the shape of the material

Item shank disk contents Item x

no. length mm Ø mm group 100 pcs.

Suitable for BiERBACH ® -tools as per pages 50.4 + 50.5

032 637 37 30 100 18

032 647 47 30 100 18

032 662 62 30 100 18

032 737 37 60 100 18

032 747 47 60 100 18

032 762 62 60 100 18

BiERBACH ® -washer drive pins

Pre-assembled with drive pin.

Drive pin with pre-assembled steel washers for secure fastening of

soft and pliable materials. Prevents too deep penetration.

Item shank steel washer nylon washer contents Item x

no. length mm Ø mm Ø mm group 100 pcs.

Suitable for BiERBACH ® -tools as per pages 50.4 + 50.5

Steel, galvanized

031 827 27 20 8,5 100 18

031 832 32 20 8,5 100 18

031 852 52 20 8,5 100 18

031 927 27 36 8,5 100 18

031 932 32 36 8,5 100 18

031 952 52 36 8,5 100 18

For use with tools of other makes see pages 50.4 + 50.5


Equipment for threaded studs »M8«

Threaded studs »M8«

Equipment for threaded stud »M8«

for BiERBACH ® -Bimatic 42 and 72

Item type contents Item x

no. group ea.

000 594 � piston 42 M8 1 16

000 595 � piston 72 M8 1 16

� If not in stock production possible for economical order quantities.

See also pages 50.6 + 50.7

BiERBACH ® -threaded stud »M8«

Item shank shank-Ø thread nylon washer contents Item x

no. length mm mm length mm Ø mm group 100 pcs.

Steel, yellow galvanized; boxed

High quality special stud for fastenings on steel, knurled

041 114 14 4,5 15,0 8,5 100 18

Steel, galvanized; boxed

For fastenings on concrete

041 132 32 4,5 15,0 8,5 100 18

041 152 52 4,5 15,0 8,5 100 18

BiERBACH ® -threaded stud »M8«

Only suitable for: DX 450.

Item shank shank-Ø thread nylon/steel contents Item x

no. length mm mm length mm washer Ø mm group 100 pcs.

Steel, yellow galvanized; boxed

High quality special stud for fastenings on steel, knurled

041 314 14 4,5 15,0 12,0 100 18

Steel, galvanized; boxed

For fastenings on concrete

041 332 32 4,5 15,0 12,0 100 18

041 352 52 4,5 15,0 12,0 100 18

* registered trademark of Hilti AG, Schaan

For use with tools of other makes see pages 50.4 + 50.5

electric conduit fastening

Ø 8,5

Ø 12

New

Line

15

L

15

L

Powder actuated

fastening technology

000 594

000 595

Threaded studs M8

suitable for:

*Hilti DX 450

50.11


Fastening Technique

Fastening of mineral insulation materials

50.12

New

Line

New

Line

000 554

000 553

000 550

R

000 552

000 545

Powder actuated tool

Insulation fastening

Cartridges

BiERBACH ® Powder actuated tool

type »Bimatic 42«

for fastening of insulation materials

Non-repetitive powder actuated tool technology; quick - safe - easy to handle.

Special tool for fastening of insulation materials.

Equipped with barrel group LB 42/2 for insulation sheet anchors, for

insulation material of upto 100 mm thickness. In a tool case complete

with cleaning cloth, cleaning spray, brush, safety googles, wrench, ejection rod.

Technical data:

Weight: 2,4 kg

Length of tool 460 mm

Cartridges: calibre 6.8/11, magazined

Load: red, yellow, green

The BiERBACH ® Powder actuated tool type »Bimatic 42« has been

tested and approved by th PTB in accordance with § 21 of the German

Weapons Act.

Equipment:

Barrel group LB 42/2, barrel Ø 8,5, for insulation sheet anchors.

• Barrel type DPH

• Barrel sleeve DPH

• Piston DPH

• Return spring 42

Item type contents Item x

no. group each

000 550 BiERBACH ® -Bimatic 42/2 complete 1 16

000 551 Barrel group LB 42/1 for insulation fastening 1 16

000 552 Barrel 42/2 1 16

000 553 Barrel sleeve 42/2 1 16

000 554 Piston 42/2 1 16

000 545 Return spring 42 1 16

000 390 Cleaning spray 1 16

000 391 Cleaning brush 1 16

000 392 Cleaning cloth 1 16

000 393 Ejection rod 1 16

000 523 Wrench 13 mm 1 16

Tool leasing for the professional trade possible.

BiERBACH ® -cartridges, magazined

Calibre 6.8/11, magazined:

suitable for BiERBACH ® -Bimatic 42 and BiERBACH ® -Bimatic 72

Item colour load contents Item x

no. group 100 pcs.

030 101 green weak 100 17

030 102 yellow medium 100 17

030 103 red very strong 100 17

For use with tools of other makes see pages 50.4 + 50.5


Insulation material fastening

Fastener programm

Insulation sheet fastener

suitable for:

BiERBACH ® -Bimatic 42/2;

Hilti* DX A40; DX A41; DX 36M

(pay attention to the tool equipment)

BiERBACH ® -insulation sheet anchors

Pre-assembled with drive pins.

System for fastening of insulation materials.

• Quick and secure fastening of insulation sheets made of mineral materials,

polystyrene insulation boards and soft insulation materials on concrete

and stone.

• Economical working process up to 5 times faster than conventional

fastening systems.

• No squashing of the insulation material.

• Due to knobbed surface of the disk plaster will adhere firmly after

smoothing.

Covering cap designed for plaster adherence.

Corrosion protected by galvanised drive pins.

Complete with pre-assambled special drive pin.

Base material for fastening:

Concrete B15 to B35

• Fair-faced brickwork, e.g. lime malm brick or cement brick.

• Plastered masonry, e.g. lime malm brick, cement brick or

bricks with minimum of 20 mm thickness of plaster

Item disk-Ø insul.mat drive pin drive pin contents Item x

no. mm thickness L in mm shank Ø length in mm group 100 pcs.

Polyäthylen

032 940 65 40 4,5 37 300 18

032 945 65 45 4,5 37 300 18

032 950 65 50 4,5 37 300 18

032 960 65 60 4,5 57 300 18

032 970 65 70 4,5 57 200 18

032 975 65 75 4,5 57 200 18

032 980 65 80 4,5 57 200 18

032 900 65 100 4,5 57 200 18

More fastening elements for insulation material shown in

BiERBACH ® -production programm 10.

* registered trademark of Hilti AG, Schaan

Ø 65

L

Powder actuated

fastening technology

Pre-assembled

with drive pins.

50.13


Fastening Technique

Fastening of partition wall profiles

50.14

New

Line

000 564

New

Line

000 560

000 563 000 562

000 544

R

000 545

Powder actuated tool

with magazine for fasteners upto

42 mm length Cartridges

BiERBACH ® Powder actuated tool

type »Bimatic 42« with fastener magazine

Non-repetitive powder actuated tool technology with magazine for

quick and serial fastenings.

Light universal tool for magazined drive pins and casing nails upto

42 mm length, sturdy built and easy to use. Equipped with barrel group

LB 42/3 (fastener magazine).

In a tool case complete with cleaning cloth, cleaning spray,

brush, safety googles, wrench, ejection rod.

Technical data:

Weight: 2,4 kg

Length of tool 375 mm

Cartridges: calibre 6.8/11, magazined

Load: red, yellow, green

The BiERBACH ® Powder actuated tool type »Bimatic 42« has been

tested and approved by th PTB in accordance with § 21 of the German

Weapons Act.

Equipment:

Barrel group LB 42/3, fastener magazine

• Barrel 42 M

• Magazine device 42

• Piston 42

• Return spring 42

• Annual spring

Item type contents Item x

no. group each

000 560 BiERBACH ® -Bimatic 42/3 complete 1 16

000 561 � Barrel group LB 42/3 for fastener magazines 1 16

000 562 � Magazine device 42 1 16

000 563 � Barrel 42/3 1 16

000 544 Piston 42 1 16

000 545 Return spring 42 1 16

000 564 Annular spring 1 16

000 390 Cleaning spray 1 16

000 391 Cleaning brush 1 16

000 392 Cleaning cloth 1 16

000 393 Ejection rod 1 16

000 523 Wrench 13 mm 1 16

� If not in stock production possible for economical order quantities.

Tool leasing for the professional trade possible.

BiERBACH ® -cartridges, magazined

Calibre 6.8/11, magazined:

suitable for BiERBACH ® -Bimatic 42 and BiERBACH ® -Bimatic 72

Item colour load contents Item x

no. group 100 pcs.

030 101 green weak 100 17

030 102 yellow medium 100 17

030 103 red very strong 100 17

For use with tools of other makes see pages 50.4 + 50.5


Powder actuated tool

with fastener magazine

Cartridges Fastening Technique

Fastening of timber base frames

BiERBACH ® Powder actuated tool

type »Bimatic 72« with fastener magazine

Non-repetitive powder actuated tool technology with magazine for

quick and serial fastenings.

Universal tool for magazined drive pins and casing nails upto 72 mm length,

sturdy built and easy to use. Equipped with barrel group LB 72/3 (fastener

magazine).

In a tool case complete with cleaning cloth, cleaning spray, brush, safety

googles, wrench, ejection rod.

Technical data:

Weight: 2,7 kg

Length of tool 430 mm

Cartridges: calibre 6.8/11, magazined

Load: red, yellow, green

The BiERBACH ® Powder actuated tool type »Bimatic 72« has been

tested and approved by th PTB in accordance with § 21 of the German

Weapons Act.

Equipment:

Barrel group LB 72/3, fastener magazine

• Barrel 72 M

• Magazine device 72

• Piston 72

• Return spring 72

• Annular spring

Item type contents Item x

no. group each

000 580 BiERBACH ® -Bimatic 72/3 complete 1 16

000 581 Barrel group LB 72/3 for fastener magazines 1 16

000 582 Magazine device 72 1 16

000 583 Barrel 72/3 1 16

000 574 Piston 72 1 16

000 575 Return spring 72 1 16

000 564 Annular spring 1 16

000 390 Cleaning spray 1 16

000 391 Cleaning brush 1 16

000 392 Cleaning cloth 1 16

000 393 Ejection rod 1 16

000 523 Wrench 13 mm 1 16

Tool leasing for the professional trade possible.

BiERBACH ® -cartridges, magazined

Calibre 6.8/11, magazined:

suitable for BiERBACH ® -Bimatic 42 and BiERBACH ® -Bimatic 72

Item colour load contents Item x

no. group 100 pcs.

030 101 green weak 100 17

030 102 gelb medium 100 17

030 103 red very strong 100 17

For use with tools of other makes see pages 50.4 + 50.5

New

Line

000 564

New

Line

000 583

000 580

000 574

000 575

000 582

50.15


Fastening Technique

Magazined drive pins and casing

nails suitable for:

BiERBACH ® -Bimatic 42/3;

BiERBACH ® -Bimatic 72/3;

Hilti* DX A40; DX A41; DX 36M

(Pay attention to tool equipment)

50.16

New

Line

R

Fastener programm

magazined

BiERBACH ® -drive pins, magazined

For fastenings on steel with a maximum tensile strength of 450 N/mm 2

and concrete.

Item shank shank-Ø head-Ø contents item x

no. length mm mm mm group 100 pcs.

Steel, galvanized; in magazines of 10 pcs. each

High quality special pin for fastenings on steel, knurled

034 016 16 3,7 8,5 100 18

034 019 19 3,7 8,5 100 18

Steel, galvanized; in magazines of 10 pcs. each

Fastening of profiles for partition walls

For fastenings on concrete; for fastenings on concrete of higher strength

use shorter and on softer concrete longer pins.

Suitable for BiERBACH ® -tools as per pages 50.4 + 50.5

034 022 22 3,7 8,5 100 18

034 027 27 3,7 8,5 100 18

034 032 32 3,7 8,5 100 18

034 037 37 3,7 8,5 100 18

034 042 42 3,7 8,5 100 18

034 047 47 3,7 8,5 100 18

034 052 52 3,7 8,5 100 18

034 057 57 3,7 8,5 100 18

034 062 62 3,7 8,5 100 18

034 072 72 3,7 8,5 100 18

BiERBACH ® -casing nails,

magazined

With pre-set breaking point, for fastening of casing wood that will be

removed again. Small head facilitates removal of the wood, controlled

breaking of nail shank on pre-set breaking point.

Item shank shank-Ø casing contents Item x

no. length mm mm thickness group 100 pcs.

Steel, galvanized; in magazines of 10 pcs. each

Suitable for BiERBACH ® -tools as per pages 50.4 + 50.5

034 147 47 3,7 22 100 18

034 154 54 3,7 29 100 18

034 162 62 3,7 38 100 18

BiERBACH ® -cartridges, magazined

Calibre 6.8/11, magazined

Item colour load contents Item x

no. group 100 pcs.

suitable for: Bimatic 42; Bimatic 72

beto 200, beto 201, beto 400;

BSG 200, BSG 201, BSG II;

Hilti** DX A40, DX A41, DX 36M, DX 450

030 101 green weak 100 17

030 102 yellow medium 100 17

030 103 red very strong 100 17

* registered trademark of Hilti AG, Schaan


Fastener programm for

tools of other makes

Drive pins

Threaded studs M6

suitable for:

Hilti* DX 450

BiERBACH ® -drive pins »450«

For fastenings on steel with maximum tensile strength of 450 N/mm 2

and concrete. For use with: DX 450.

Item shank shank-Ø head-Ø steel washer contents Item x

no. length mm mm mm Ø mm group 100 pcs.

Steel, galvanized; boxed

High quality special pin for fastenings on steel, knurled

033 016 16 3,7 5,6 12,0 100 18

033 019 19 3,7 5,6 12,0 100 18

Steel, galvanized; boxed

For fastenings on steel an concrete.

For fastenings on concrete of higher strength use shorter and on

softer concrete longer pins.

033 022 22 3,7 5,6 12,0 100 18

033 027 27 3,7 5,6 12,0 100 18

033 032 32 3,7 5,6 12,0 100 18

033 037 37 3,7 5,6 12,0 100 18

033 042 42 3,7 5,6 12,0 100 18

033 047 47 3,7 5,6 12,0 100 18

033 052 52 3,7 5,6 12,0 100 18

033 057 57 3,7 5,6 12,0 100 18

033 062 62 3,7 5,6 12,0 100 18

033 072 72 3,7 5,6 12,0 100 18

033 082 � 82 3,7 5,6 12,0 100 18

033 097 � 97 1 3,7 5,6 12,0 100 18

1 Pre-penetration with a hammer.

� If not in stock production possible for economical order quantities.

BiERBACH ® -threaded studs »M6«

For fastenings on steel with maximum tensile strength of 450 N/mm 2 ,

with nylon washer. For use with: DX 450.

Item shank shank-Ø thread nylon/steel- contents Item x

no. length mm mm length mm washer Ø mm group 100 pcs.

Steel, galvanized; boxed

High quality special stud for fastenings on steel, knurled

041 212 12 3,7 11,0 12,0 100 18

Steel, galvanized; boxed

For fastenings on concrete; for fastenings on concrete of higher strength

use shorter and on softer concrete longer pins.

041 222 22 3,7 11,0 12,0 100 18

041 227 27 3,7 11,0 12,0 100 18

041 232 � 32 3,7 11,0 12,0 100 18

041 242 � 42 3,7 11,0 12,0 100 18

� If not in stock production possible for economical order quantities.

* registered trademark of Hilti AG, Schaan

Ø 12

Ø 12

11

L

L

Powder actuated

fastening technology

50.17


Fastening Technique

50.18

R

New

Line

Merchandiser

Powder actuated tool

BiERBACH ® -merchandiser

with BiERBACH ® -Powder actuated tool type »Bimatic 72«

and fasteners

Assortment with fasteners and cartridges suitable for all professional

sectors, on an attractively designed merchandiser with colour display.

Occupies little space, therefore easy to place, your extra salesman!

Item type contents Item x

no. group each

000 150 BiERBACH ® -merchandiser 72 complete 1 16

assortement:

000 570 Powder actuated tool type »Bimatic 72« 1

fasteners:

031 016 drive pins, shank length 16 mm 600

031 027 drive pins, shank length 27 mm 600

031 037 drive pins, shank length 37 mm 600

031 057 drive pins, shank length 57 mm 600

031 062 drive pins, shank length 62 mm 600

041 012 threaded studs M6, shank length 12 mm 600

041 022 threaded studs M6, shank length 22 mm 600

031 827 washer drive pins, shank length 27 mm 600

031 447 casing nails, shank length 47 mm 600

031 454 casing nails, shank length 54 mm 600

030 103 cartridges 6,8/11 magazined red 600

030 102 cartridges 6,8/11 magazined yellow 600

030 101 cartridges 6,8/11 magazined green 600

BiERBACH ® -merchandiser

with fasteners

Item type contents Item x

no. group each

000 152 BiERBACH ® -merchandiser 50 1 16

assortement:

fasteners:

031 016 drive pins, shank length 16 mm 600

031 027 drive pins, shank length 27 mm 600

031 037 drive pins, shank length 37 mm 600

031 057 drive pins, shank length 57 mm 600

031 062 drive pins, shank length 62 mm 600

041 012 threaded studs M6, shank length 12 mm 600

041 022 threaded studs M6, shank length 22 mm 600

031 827 washer drive pins, shank length 27 mm 600

031 447 casing nails, shank length 47 mm 600

031 454 casing nails, shank length 54 mm 600

030 103 cartridges 6,8/11 magazined red 600

030 102 cartridges 6,8/11 magazined yellow 600

030 101 cartridges 6,8/11 magazined green 600


The perfect connection

Fastening

Technology

Production programm

Innovative products for the

Professional trade and DIY

10 Fastening Technology


Fastening Technique

R

Fastening Technology

Produktion programm

hammer-in nylon anchors, installation

wedges, insulation anchors, insulation

fasteners, insulation mat anchors, insulati-

on metal anchors, insulation sheet

anchors, knot anchors, multipurpose nylon

anchor, nail disks, nylon anchors, nylon

press nails, nylon press studs M6, sealing

hammer-in anchors, skirting anchors in

colours, spacing wedges

* A BiERBACH® -product engineered for the whole European market.

aerated concrete nails, cable tie press

nails, cavity block nylon anchors, ceiling

anchors, cladding anchors, collar frame

fixings, collar nylon anchors with washer,

construction wedges, decorative cover

caps, dome head metal anchors, dome

head nylon anchors, Euro concrete

anchors*, Euro concrete studs*, Euro

concrete threaded studs*, Euro concrete

screws*, express anchors, fixpins, frame

fixings, frame fixings with screws,


Index Fastening Technique

A

aerated concrete nails 10.23

B

bits 10.25

C

cable tie press nails 10.7

cavity block nylon anchors 10.12

ceiling anchors 10.13

cladding anchors 10.12

collar frame fixings 10.8

collar nylon anchors with washer 10.10

colour caps 10.25

concrete anchors 10.18-19

concrete Euro screws 10.14-16

concrete Euro threaded studs* 10.16

concrete frame screws 10.17

concrete studs 10.19

construction wedges 10.23

D

decorative cover caps 10.25

dome head metal anchors 10.20

dome head nylon anchors 10.11

E

Euro concrete anchors* 10.18-19

Euro concrete studs* 10.19

Euro concrete threaded studs* 10.16

Euro concrete screws* 10.14-16

express anchors 10.20

F

fixpins 10.22

foam panel clip 10.26

frame fixings 10.8,12

frame fixings with screws 10.9

H

hammer-in threaded stud 10.21

hammer-in nylon anchors 10.8-10

I

installation wedges 10.23

insulation anchors 10.27

insulation and foam panel clip 10.27

insulation fasteners 10.10,26-29

insulation fasteners 10.10

insulation mat anchor 10.28

insulation metal anchors 10.28

insulation nails 10.29

insulation sheet anchor 10.27

insulation supports 10.26-27

K

knot anchors 10.6

L

levelling screws 10.24

M

mounting strip 10.13

multipurpose nylon anchor 10.6

N

nail disks 10.21

nylon anchors 10.6-12

nylon press nails 10.7

* A BiERBACH® -product engineered for the whole European market.

P

press nails 10.7

R

retaining disks 10.18, 29

S

safety nail 10.13

screw anchors 10.14-16

sealing hammer-in anchors 10.10

setting tool 10.19, 21

setting tool, hand protected 10.22

skirting anchors, coloured 10.11

spacing screws 10.25

spacing wedges 10.23

stud anchor 10.16

W

wall plugs, nylon 10.6

wedges 10.23


Fastening Technique

The BiERBACH ® -nylon anchor programm

BiERBACH ® offers the ideal fasteners for almost all

applications like nylon anchors, metal anchors etc.When

choosing the appropriate fastener a number of influen-

cing factors have to be taken into account. Only in case

that the fasteners are appropriate for the specific appli-

cation the requirements regarding load and security

characteristics can be fullfilled.

Factors of influence when choosing

fasteners:

• base material (construction material)

• load

– amount

– direction

– dynamics

• position in construction component (rim and axial

distances)

• fire characteristics, corrosion resistance, demounting

possibility

1. Base material (construction material)

The range of base materials used on constructions and

installations is very ample. Specially light weight materials

are more and more used on account of their favorable

characteristics regarding weight and thermal conductivity.

When choosing an anchor special attention

has to be paid to the characteristics of the construction

material like hardness, densitiy, volume and form. Specially

fastenings on porous or cavity construction components

require the use of specific anchors.

10.2

R

BiERBACH ® -Fastening Technique

2. Loads

A nylon anchor or other fastener must be capable to

transfer securely the resulting loads into the base material.

It is important to observe whether the load attacks

according to the axis of the anchor, i.e. exerting a pullout

strain, or vertically, i.e. with a shearing or bending

force. A combination of both load types is possible. The

load capacity of an anchor is considerably reduced in

case of changing load forces, i.e. dynamic ones. Reduced

load capacity has also to be taken into account in

case of vibrations. The pull-out values shown in this

catalogue represent break load values. For the calculation

of constructions a corresponding safety factor has to

be considered.

3. Position in the construction component

The fastening position in the construction component

may require the use of a specific anchor type. If the

fastening point has to be close to the rim of a construction

component the use of anchors creating high expansion

pressure is normally not possible. In this case

expansion pressure free and positive locking anchors or

compound anchoring systems have to be used.


BiERBACH ® -Fastening Technique Fastening Technique

4. Corrosion resistance/fire characteristics

It has to be examined whether the fastening requires

special fire characteristics and corrosion resistance. This

is important when choosing the fastener.

Categories of effectiveness

• positive locking type i.e. drywall anchors, aerated,

concrete anchors,

concrete screws,

• non-positive locking type i.e. nails, nylon anchors,

(forced locking) hammer-in nylon anchors

• combination of both i.e. ISO-anchors,

knot anchors

Factors of influence when mounting

In any case, the mounting instructions for the individual

products have to be observed. Drill diameter, drill depth,

screw diameter etc. have to be maintained otherwise the

effectiveness of the fastener will be reduced. On light

weight base materials or cavity brick walls, drilling has to

be made in drill and not hammer mode. The drill hole

should be made as vertical as possible in relation to the

surface of the construction component, and subsequently

cleaned (blown out).

10.3


Fastening Technique

10.4

R

concrete

natural stone

solid brick Mz, KSV

Application chart (recommended)

standard fastenings

concrete Euro screws* ● ● ● ● – ● – – –

skirting board anchors, coloured ● ● ● ● – ● – – –

ceiling nails ● ● ● – – – – – –

wall plugs ● ● ● ● ● ● – – –

Euro concrete studs* type A ● ● ● – – – – – –

Euro concrete studs* type B ● ● ● – – – – – –

express anchor ● ● ● ● – ● – – –

levelling screw J3 ● ● ● ● – ● – – –

knot anchor ● ● ● ● ● ● ● ● –

cavity block nylon anchor ● ● ● ● – ● – – –

dome head metal anchor ● ● ● – – – – – –

nylon press nails ● ● ● – – ● – ● –

aerated concrete nail – – – ● ● – – – –

frame fixings with screws ● ● ● ● – ● – – –

frame fixings

concrete frame screw ● ● ● ● – ● – – –

concrete frame screw type Z ● ● ● ● – ● – – –

collar nylon anchor ● ● ● ● ● ● – – –

aerated concrete nail ● ● ● ● ● ● – – –

frame fixings with screws ● ● ● ● ● ● – – –

insulation fastening

insulation anchors ● ● ● ● ● ● – – –

insulation nail – – – – – – – ● –

cladding anchors ● ● ● – – ● – – –

insulation metal anchors ● ● ● ● ● ● – – –

insulation mat anchors ● ● ● – – ● – ● –

insulation panel anchors ● ● ● – – ● – – –

dome head nylon anchor ● ● ● ● ● ● – – –

● suitable ● conditionally suitable ●* rigid foam sheets, styropor

*A BiERBACH ® -product engineered for the whole European market.

aerated concrete

solid gypsum board

cavity blocks Hlz, KSL

dry wall boards

sheets/boards/metal sheet

wood


Application chart (recommended) Fastening Technique

concrete

natural stone

electrical installations

fixpin prof ● ● ● – – ● – – –

fixpin standard ● ● ● – – ● – – –

cable tie press nail ● ● ● – – ● – ● –

nail disks ● – ● ● ● ● – ● –

plumber/sanitary installations

concrete Euro threaded stud* M8 ● ● ● ● – ● – – –

hammer-in threaded stud ● ● ● – – ● – – –

Euro concrete threaded stud*

M6 type C ● ● ● ● – ● – – –

fixpin prof ● ● ● – – ● – – –

fixpin standard ● ● ● – – ● – – –

nylon anchor with threaded stud M6 ● ● ● ● ● ● – – –

● suitable ● conditionally suitable

*A BiERBACH ® -product engineered for the whole European market.

solid brick Mz, KSV

aerated concrete

solid gypsum board

cavity blocks Hlz, KSL

dry wall boards

sheets/boards/metal sheet

wood

10.5


Fastening Technique

10.6

Technically

Approved

genuine nylon

R

l

l

d

d

Nylon anchors

Knot anchors

Multipurpose anchors

BiERBACH ® -nylon wall plugs

Genuine nylon, grey.

A universally applicable wall anchor suited for wood or chipboard screws.

These anchors are manufactured from high quality polyamide (nylon) ensuring

resistance against climatic conditions, ageing and decay.

Nylon is sound insulating, offers a good electrical non-conductivity and is

stable for temperature ranges of -40° up to +80°. The maximum load capacity

of the anchor is achieved when using the largest possible screw diameter. The

screws must, in this case, be 5 mm-10mm (1 x screw diameter) longer than

the anchor and the material which is being attached.

Item plug contents x

no. d x l screw drill pcs item 100

Ø Ø PU/pallet group pcs

boxed

170 005 5 x 25 2,5- 4,0 5,0 100/ 800 01

170 006 6 x 30 3,5- 5,0 6,0 100/ 800/102400 01

170 008 8 x 40 4,5- 6,0 8,0 100/ 800/ 51200 01

170 010 10 x 50 6,0- 8,0 10,0 50/ 400 01

170 012 12 x 60 7,0-10,0 12,0 25/ 500 01

170 014 14 x 70 10,0-12,0 14,0 20/ 500 01

BiERBACH ® -knot anchor

Multipurpose anchor

Polyethylene, with collar, for fastenings on cavity ceilings and walls,

Fermacell sheets, drywall and chipboards.

The BiERBACH ® -knot anchor is universally usable. This anchor expands in

solid construction materials and maintains its grip through its pressuring action

(friction grip) on the bore hole surface. In cavity materials the anchor knots

itself into the available space (with a moulded locking force). The knot anchor

was developed for wood and chipboard screws. The anchor collar prevents

the anchor from being pulled into the cavity and ensures a flush finish.

The specific form of the expanding shaft (divided in 3) combined together at

the anchor end, guarantees a perfect screw insertion, producing the greatest

possible and evenly distributed expansion action. The ribs beneath the anchor

collar provide an effective action against rotation.

The screw length is calculated by the anchor length plus the thickness of the

object to be fastened.

Item anchor screw-in screw drill contents item x

no. d x l depth Ø Ø pcs/PU group 100pcs.

boxed; packing unit = 8 boxes

170 506 6 x 30 35 4,0 - 5,0 6,0 100/ 800 01

170 508 8 x 50 55 5,0 - 6,0 8,0 100/ 800 01

170 510 10 x 60 65 6,0 - 7,0 10,0 50/ 400 01


Nylon press nails

Cable tie press nails Fastening Technique

corrosion-free fastenings attractive finish by different

colours

BiERBACH ® -nylon press nail

genuine nylon

Nylon anchors and screws now belong to history. BiERBACH ® -nylon press

nails allow quick and accurate direct fastening into timber, concrete, brickwork

and other solid construction materials. Pre-drill hole, hammer in the

press-nail or stud, finished. Made of high quality nylon, the anchor offers

several advantages:

• High pullout resistance

The elastic lamella structure of the nylon press nail gives a strong grip on

the joints (see chart).

Corrosion resistant

The whole nail is made of non-degrading nylon, therefore weather resistant

and electrically non-conductive.

These features make the BiERBACH ® -nylon press nail the genuine all-round

nail. Deco-boards, wood ledges and coverings, skirting boards, windowsills,

gypsum boards, cable conduits or signs are just a few examples where good

anchoring is guaranteed.

Item dim. mm colour contents item x

no. d x l pcs/PU group 100pcs.

boxed; packing unit = 8 boxes

169 001 6 x 40 white 200/1600 15

169 101 6 x 65 white 200/1600 15

169 002 6 x 40 black 200/1600 15

169 102 6 x 65 black 200/1600 15

oak dark, golden teak, cherry-tree, larch

169 005 6 x 40 brown 200/1600 15

169 105 6 x 65 brown 200/1600 15

walnut, teak

169 006� 6 x 40 dark brown 200/1600 15

169 106� 6 x 65 dark brown 200/1600 15

� If not in stock production possible for economical order quantities.

Production of special colours possible for economical order quantities.

BiERBACH ® -cable tie press nail

genuine nylon, grey

Besides fastening cable conduits on concrete or brickwork the

BiERBACH ® -cable conduit press nail offers one more important feature: a

plastic strip can be pushed through the opening in the head ( see also cable

nylon tie fasteners on page 10.26, item no. 130125 a.f.), the cables are laid

into the conduit and securely and easily bundled together. All without nylon

anchors or screws. BiERBACH ® -cable conduit press nails are the practical

and economical way to fasten cables and cable conduits at the same

time.

Item dim. mm colour contents item x

no. d x l pcs/PU group 100pcs.

boxed; packing unit = 8 boxes

169 501 6 x 40 200/1600 15

pulling load (kg)

distance (mm))

TOP

QUALITY

PRODUCT

TOP

QUALITY

PRODUCT

fastening of cable conduits and cables with press nails and

cable ties

drill/hammer-in/finished

genuine nylon

drill/hammer-in/finished

genuine nylon

Types and sizes

size hole Ø object thickness minimum drill

mm mm* up to mm depth mm

6 x 40 6 8 32

6 x 85 6 33 32

In softer materials higher pullout values are obtained with

drill hole gauges of 5.0 or 5.5 mm

Pull-out values

material hole drill-bit average guaranteed

depth size pull-out static

mm mm value value*

soft wood 32 5,5 50 kg 10,0 kg

hard wood 32 6,0 67 kg 13,4 kg

fibrous board 32 5,5 48 kg 9,6 kg

brick 20N/mm 2 32 6,0 53 kg 10,6 kg

concrete 50N/mm 2 32 6,0 71 kg 14,2 kg

* The guaranteed pull-out values are based on a safety factor of 5.

l

l

d

d

10.7


Fastening Technique

10.8

Technically

Approved

Technically

Approved

Preassembled

genuine nylon

drill/hammer-in/finished

Preassembled

genuine nylon

drill/hammer-in/finished

R

l

l

d

d

Frame fixings

Collar frame fixings

BiERBACH ® -frame fixings

Made of high-grade impact resistant nylon,

bright galvanized, yellow chromated, screw nail with BiRAX cross

recessed head and barbed threading, to be hammered-in. pre-assembled,

removable. Used for through fastening of metal and plastic battens,

skirtings, roof battens, frames and posts on concrete or brickwork. Fastens as

quickly as a nail yet as securely as a screw.

The barbed thread means the joint can be adjusted subsequently,

i.e. tightened or loosened.

effec- ancho- contents x

Item anchor screws tive ring pcs item 100

no. d x l d x l length depth PU/pallet group pcs.

boxed

174 025 2 * 5 x 30 3,2 x 35 5 25 100/800 01

174 027 2 * 5 x 40 3,2 x 45 15 25 100/800 01

174 029 2 *� 5 x 50 3,2 x 55 25 25 100/800 01

174 035 3 *� 6 x 40 3,6 x 45 10 30 100/800 01

174 037 3 * 6 x 50 3,6 x 55 20 30 100/800 01

174 039 3 * 6 x 60 3,6 x 65 30 30 100/800/51200 01

174 040 2 * 6 x 80 3,6 x 85 50 30 100/800/51200 01

174 050 3 *� 8 x 50 5,0 x 55 10 40 100/800 01

174 065 3 * 8 x 60 5,0 x 65 20 40 100/800/32000 01

174 080 2 * 8 x 80 5,0 x 85 40 40 100/800/32000 01

174 100 2 * 8 x 100 5,0 x 105 60 40 100/800/28800 01

174 120 3 * 8 x 120 5,0 x 125 80 40 100/800 01

174 101 1/3 10 x 100 7,0 x 105 50 50 50/500 01

174 115 1/3 10 x 120 7,0 x 125 70 50 50/500 01

174 135 1/2 10 x 140 7,0 x 145 90 50 50/500 01

BiERBACH ® -collar frame fixings*

Made of high-grade impact resistant nylon,

bright galvanized, yellow chromated, screw nail with BiRAX cross recessed

head and barbed threading, to be hammered-in pre-assembled,

removable.

Used for fastening of metal and plastic battens as well as frames and posts on

concrete or brickwork. Fastens as quickly as a nail yet as securely as a screw.

The barbed thread means the joint can be adjusted subsequently, i.e. tightened

or loosened.

Item anchor srews effective anchoring contents item x

no. d x l d x l length depth pcs/PU group 100 pcs.

boxed; packing unit = 8 boxes

174 305 3 6 x 40 3,6 x 45 10 30 100/ 800 01

174 306 3 6 x 60 3,6 x 65 30 30 100/ 800 01

174 310 2 � 8 x 80 5,0 x 85 40 40 100/ 800 01

174 311 2 � 8 x 100 5,0 x 105 60 40 100/ 800 01

174 312 2 � 8 x 120 5,0 x 125 80 40 100/ 800 01

*Can be produced unassembled at reduced price for economical

order quantities.

� If not in stock production possible for economical order quantities.


Screw frame fixings

Hammer-in frame fixings A2

Hammer-in threaded studs M6 Fastening Technique

BiERBACH ® -screw frame fixings*

Made of high-grade impact resistant nylon but with bright galvanized,

yellow chromated safety screw to be screwed in, pre-assembled.

For fastenings in solid construction materials.

Item anchor screws effective anchoring contents item x

no. d x l d x l length depth pcs/PU group 100pcs

boxed; packing unit = 10 boxes

174 365 8 x 60 5,0 x 65 20 40 100/1000 01

174 380 8 x 80 5,0 x 85 40 40 100/1000 01

174 400 8 x 100 5,0 x 105 60 40 100/1000 01

174 420 8 x 120 5,0 x 125 80 40 100/1000 01

Other sizes can be produced for economical order quantities.

* Can be produced unassembled at reduced price for economical

order quantities.

BiERBACH ® -hammer-in frame fixings

„stainless steel A2“*

Made of high-grade impact resistant nylon, hammer-in nail screw

with BiRAX-cross-recessed head and barbed thread made of

corrosion free stainless steel to be hammered-in, pre-assembled,

removable.

If fastenings are exposed to weather or aggressive vapour BiERBACH ® ‚

frame fixings with screw nail made of corrosion free stainless steel

are used.

Item anchor screws effective anchoring contents item x

no. d x l d x l length depth pcs/PU group 100pcs

boxed; packing unit = 10 boxes

174 735 � 6 x 40 3,6 x 45 10 30 100/1000 01

174 760 6 x 80 3,6 x 85 50 30 100/1000 01

174 780 � 8 x 80 5,0 x 85 40 40 100/1000 01

174 710 8 x 100 5,0 x 105 60 40 100/1000 01

174 712 8 x 120 5,0 x 125 80 40 100/1000 01

Other sizes can be produced for economical order quantities.

*Can be produced unassembled at reduced price for economical

order quantities.

� If not in stock production possible for economical order quantities.

BiERBACH ® -hammer-in threaded studs M6*

Made of high-grade impact resistant nylon, stud with M6 threading,

bright galvanized, yellow chromated, pre-assembled.

Hammer-in studs with metric threaded joint are suitable for fastening

of objects which can be screwed on, i.e. cable clips for the installation

sector.

Item anchor nail contents item x

no. d x l d x l pcs/PU group 100 pcs

boxed; packing unit = 10 boxes

174 199 6 x 40 3,6 x 45 100/1000 01

Other sizes can be produced for economical order quantities.

*Can be produced unassembled at reduced price for economical

order quantities.

Stainless steel rustproof products are subject to temporary alloy

surcharges/reductions.

Technically

Approved

genuine nylon

genuine nylon

drill/hammer-in/finished

drill/srew-in finished

Preassembled

drill/hammer-in/finished

Preassembled

genuine nylon

l

l

l

d

d

d

10.9


Fastening Technique

coverings on house extensions wall joints

10.10

Technically

Approved

Technically

Approved

Preassembled

genuine nylon

drill/hammer-in/finished

R

Preassembled

l

l

d

d

Collar anchor with washer

Hammer-in sealing anchor

BiERBACH ® -collar anchor with washer*

Made of high-grade impact resistant nylon, hammer-in nail screw

with BiRAX-cross-recessed head and barbed thread to be hammered-in,

pre-assembled, removable.

Used for fastening of ductile metal and Heraklith boards etc..

Fastens quickly as a nail yet as securely as a screw. The barbed thread allows

subsequent adjusting of the joint, i.e. tightening or loosening of the joint.

Item anchor washer effective anchoring contents item x

no. d x l Ø length depth pcs/PU group 100 pcs

verpackt in Kartons; VPE = 10 Kartons

174 325 3 6 x 40 20 10 30 100/1000 01

174 326 3 6 x 60 20 30 30 100/1000 01

BiERBACH ® -hammer-in sealing anchor »15«

corrosion free stainless steel A2

This pre-assembled sealing element consists of a countersunk head

nylon anchor with expansion nail, stainless steel rose and sealing washer.

These sealing elements can be installed significantly faster then

sealing screws: drill – hammer-in – finished.

As quick as nailing but secure and sealed as if screwed. The barbed thread

allows subsequent adjusting respectively loosening of the joint. Depending on

the use the drive-in sealing element can be supplied in corrosion free

stainless steel A2 of natural colour or copper plated.

Item anchor screws effective drill contents item x

no. d x l d x l length IN Ø pcs/PU group 100 pcs

boxed; packing unit = 8 boxes

corrosion free stainless steel, blank, sealing washer Ø 15 mm

174 170 3 � 6 x 60 3,6 x 65 30 6,0 200/1600 15

� If not in stock production possible for economical order quantities.

* Can be produced unassembled at reduced price for economical

order quantities.

3 with twist stop


Colour skirting anchors

Dome head hammer-in fixings Fastening Technique

secure fastening also in honeycomb bricks

BiERBACH ® -colour skirting anchors*

Made of high-grade impact resistant nylon and pre-assembled screw

nail, screw nail with BiRAX cross recessed head.

For fastening of skirtings and battens of all kinds

where colour matching of drive nail and wood is required.

Item anchor screws effective anchoring contents item x

no. d x l d x l length depth pcs/PU group 100pcs

boxed; packing unit = 8 boxes

brass plated

176 630� 5 x 30 3,2 x 35 5 25 200/1600 01

176 640 5 x 40 3,2 x 45 15 25 200/1600 01

176 650 5 x 50 3,2 x 55 25 25 200/1600 01

white

176 130 5 x 30 3,2 x 35 5 25 200/1600 01

176 140 5 x 40 3,2 x 45 15 25 200/1600 01

Other sizes or colours can be produced for economical order quantities.

* Can be produced unassembled at reduced price for economical

order quantities.

� If not in stock production possible for economical order quantities.

BiERBACH ® -dome head hammer-in

fixings

Anchors for through-fastenings made of high-grade impact resistant

nylon and pre-assembled screw nail with BiRAX cross recessed head

and barbed shank.

The BiERBACH ® dome head hammer-in fixing is the ideal way to fasten

metal profile wall joint sections, sheeting and metal coverings on roofs,

balconies, facades etc. Just drill, hammer in, finished. The extra large

head ensures extra strong and secure retention of the object to be fastened.

The drive nail made of steel or corrosion free stainless steel together with

its specially designed head form an optically complete unit.

The BiRAX cross recessed head allows easy re-adjustement and a nondestructive

dismantling at any time.

Item dim. mm contents item x

no. d x l d1 pcs/PU group 100pcs

boxed; packing unit = 8 boxes

natural colour/steel, bright galvanised, multiple applications

173 630 6 x 30 14 100/ 800 01

173 640 6 x 40 14 100/ 800 01

173 650 6 x 50 14 100/ 800 01

Stainless steel rustproof products are subject to temporary alloy

surcharges/reductions.

drill/hammer-in/finished

genuine nylon

MPA

Tested by the nat. institute for material testing

Dortmund

Preassembled

drill/hammer-in/finished

genuine nylon

Preassembled

l

l

d

D

d

10.11


Fastening Technique

10.12

genuine nylon

genuine nylon

genuine nylon

R

l

l

l

d

d

d

Cladding anchor type »10«

Frame fixings type »11«

Cavity block anchors

BiERBACH ® -cladding anchor type »10«

BiERBACH ® -frame fixings

Made of high-grade impact resistant nylon, bright galvanized, yellow

chromated safety screw with countersunk head.

This fastener has been specially designed for the fixing of façade substructures.

The BiERBACH ® safety screw has been engineered with

a reinforced cross-section and shank to resist the high stresses that

act on façades.

Item anchor screws effective anchoring contents item x

no. d x l d x l length depth pcs/PU group 100pcs

boxed; packing unit = 10 boxes

BiRAX cross recess no. 4

178 560 �10 x 60 7,0 x 65 10 50 50/500 01

178 580 �10 x 80 7,0 x 85 30 50 50/500 01

178 600 10 x 100 7,0 x 105 50 50 50/500 01

178 615 10 x 120 7,0 x 125 70 50 50/500 01

178 635 10 x 140 7,0 x 145 90 50 50/500 01

178 660 10 x 160 7,0 x 165 110 50 50/500 01

BiROX ®

drive no. 40

178 280 �10 x 80 7,0 x 85 30 50 50/500 01

178 300 �10 x 100 7,0 x 105 50 50 50/500 01

178 315 �10 x 120 7,0 x 125 70 50 50/500 01

178 335 �10 x 140 7,0 x 145 90 50 50/500 01

178 360 �10 x 160 7,0 x 165 110 50 50/500 01

� If not in stock production possible for economical order quantities.

BiERBACH ® -frame fixings type »11«

Made of high-grade impact resistant nylon,

safety screw with hexagonal head, bright galvanized, similar to DIN 571

Item anchor screws effective anchoring contents item x

no. d x l d x l length depth pcs/PU group 100pcs

boxed; packing unit = 10 boxes

bright galvanised spanner size 12

178 902� 10 x 80 7,0 x 85 30 50 50/500 01

178 903� 10 x 100 7,0 x 105 50 50 50/500 01

178 904� 10 x 120 7,0 x 125 70 50 50/500 01

178 905� 10 x 140 7,0 x 145 90 50 50/500 01

178 906� 10 x 160 7,0 x 165 110 50 50/500 01

� If not in stock production possible for economical order quantities.

BiERBACH ® -cavity block anchors

Made of high-grade impact resistant nylon, grey,

bright galvanized yellow chromated safety screw with

BiROX ® drive no. 40.

Specially designed anchor with extra long expanding shank

for fastening of sub-structures on cavity blocks or honeycomb

bricks.

Item anchor screws effective anchoring contents item x

no. d x l d x l length depth pcs/PU group 100pcs

boxed; packing unit = 10 boxes

179 002 10 x 100 7,0 x 105 20 80 50/ 500 01

179 005 10 x 120 7,0 x 125 40 80 50/ 500 01

179 003 10 x 140 7,0 x 145 60 80 50/ 500 01

179 004 10 x 160 7,0 x 165 80 80 50/ 500 01

Available accessories:

Coloured and decorative cover caps (item no. 599...).


Suspended ceilings

Ceiling anchors

Safety nails

Mounting strips

suspended ceilings

BiERBACH ® -ceiling anchor

safety Nail

Steel, bright galvanized, yellow chromated

The BiERBACH ® ceiling anchor is suited for the support anchoring of ceiling

hangers. It is characterised by its simple and rapid mounting and by its high

load capacity. The pre-drilled and cleaned hole must be of the defined nail

diameter. The ceiling nail must be hammered-in through the object to be

mounted. Due to the wedge shaped parts of the BiERBACH ® ceiling anchor

these are then pushed over each other. Through this forced expansion the nail

is tightly wedged into the drilled hole.

Suitable building materials:

Concrete (approved), natural stone, solid brick walls.

Permissible loads:

as per certificate up to 0,5 kN in tension zone.

For designers, the approval report, dimensions of fastener, permissible loads

etc. are available on request.

1 ) with MPA certificate.

Item dim. effective min. drill contents item x

no. mm length anchoring Ø pcs/PU group 100pcs

d x l mm depth mm mm

boxed; packing unit = 8 boxes

192 499 1 6 x 35 � 4,5 � 32 6,0 100/800 15

192 650 6 x 65 � 35,0 � 32 6,0 100/800 15

BiLO ® -mounting strip, perforated

Steel, hot-dip galvanised, straight or corrugated

The BiLO ® -metal strip is exceptionally suited for the tying, hanging and fixing

of installations for plumbing, sanitary and timber construction applications.

Delivered in practical plastic feed-out tins of each 10 m, straight or corrugated

types, as well as with plastic coating for sound reduction.

To be fasten with flat round screw Mu DIN 603 (item No. 572...).

Item dim. mm coil m contents item x

no. b t l pcs/PU group coil

coils per 10 m, packing unit = 10 pcs

straight type

210 123 12 0,8 10 1/10 15

210 124 17 0,8 10 1/10 15

210 125 26 1,0 10 1/10 15

corrugated type

210 134 17 0,8 10 1/10 15

straight type, plastic coated

210 144 19 3,0 10 1/10 15

MPA

Tested by the nat. institute for material testing

Dortmund

Fastening Technique

insert nylon anchor introduce suspension anchor fasten suspension anchor fix connector device

drill/hammer-in/finished

t

d

l

l

b

10.13


Fastening Technique

electrical installations on cavity blocks pipe fastening

A

B

C

10.14

2 x screw Ø

screw depth Ø 5,0 mm

material mm 20 30 40 50 60

concrete

sand lime brick

solid brick

pumice*

light concrete*

hollow block *(min.2 cavities)

*to be drilled only with drilling mode

R

A = thickness of

material to be

fastened

B = minimum

screwing depth

A + B = screw length

B + C = drilled depth

concrete

solid brick

pumice*

MPA

Tested by the nat. institute for material testing

Dortmund

sand lime brick

light concrete*

hollow block *(min.2 cavities)

New

screw depth Ø 6,5 + 7,5 mm

material mm 20 30 40 50 60

*to be drilled only with drilling mode

General information for concrete screws

This self tapping concrete screw has been specially developed for nylon

anchor free fastenings in concrete, sand lime brick, solid brick, natural

stone, cavity concrete blocks and clinker.

Screwing-in depth in concrete is usually between 30 mm and 35 mm.

Pre-drill hole appr. 5 mm deeper as screw-in depth.

Clean pre-drilled hole (blow out).

Line

drill/srew-in finished

Nylon anchor-free direct fastening

on concrete or brickwork

Concrete Euro screws*

cable conduit fastening form locked anchoring

BiERBACH ® -concrete Euro screw*

Screw anchor

for nylon anchor-free fastening in concrete or brickwork

This modern fixing element is a self-tapping screw for virtually all known

construction materials and serves for fast nylon anchor free direct fastening.

BiERBACH ® concrete Euro screws* are usable not only in efficient batch

applications but also for many fixing solutions in handicraft and industry.

This extensive, virtually almost universal application spectrum

meets the requirements of the craftsmen for a fastener that is exceptionally

low-cost and profit making.

The nylon anchor free installation combined with an extensive application

range means enormous time and therefore cost saving for the user and has

therefore a considerable competitive advantage.

The positive results can let themselves be seen.

The effectiveness of these attractive advantages, combined with a product of

constant high quality, guarantees the required safety in construction.

For further information for secure installation, see paragraph of application

and diagram of screw depth.

Advantages:

● Installation without nylon anchor (drill + screw-in = plug free installation)

● High load capacity due to profile grip into the anchoring base

● No expansion effect and therefore shorter rim distances

● Reduced torque required due to smaller drill diameter

● Tireless driving in due to BiROX ® drive

● Extensive utilisation spectrum due to various head forms

● Significantly reduced installation times (cost savings)

● Fire resistance

Anchoring base:

Concrete, sand lime brick, solid brick, pumice, light concrete, aerated

concrete, honeycomb brick, natural stone, full clinker

Fastening procedure:

● Drill hole with trade available hammerdrill.

In lightweight materials and hollow block brickwork use only drill

mode.

In aerated concrete upto grade G4, no pre-drilling required.

● The minimum drilled hole depth should be screw embedded

depth + 2 x screw Ø.

BiERBACH ® concrete Euro screws* can be driven in with an electric

screwdriver or with a hammer screwdriver.

Typical application fields:

● Shelving, skirting boards, fire extinguisher, steel profiles, cable conduits,

lightings, switch boxes, signs, pipe clips, steel sheets, sprinkler

systems, branching boxes, partion walls, separation walls.

● Sub-constructions of wood or metal, timber beams, lattices, beams,

purlins, window and door latches, flashings, thresholds beams.

● Suspended ceilings, piping, ducting, consoles, railings, sole plates,

gutter pipes.

* A BiERBACH ® -product engineered for the whole European market


Nylon anchor-free direct fastening

on concrete or brickwork

Concrete Euro screws* Fastening Technique

batten fastening electrical installations on cavity blocks cable conduit fastening direct fastening on cavity blocks

BiERBACH ® -

concrete Euro screw* type »S«

Screw anchor

for nylon anchor-free fastening in concrete or brickwork

Steel, case hardened, bright galvanized, yellow chromatized

milling head with BiROX ® -drive

Item dim. mm drill anchoring effective head bit contents item x

no. d x l l 1 Ø depth 1 ) length Ø no. pcs. group 100 pcs

boxed

506 030 5,0 x 30 * 4,0 25 1 ) 5 8,0 T20 200 15

506 045 5,0 x 45 * 4,0 30 1 ) 15 8,0 T20 200 15

506 060 5,0 x 60 55 4,0 30 1 ) 30 8,0 T20 200 15

506 145 6,5x 45 * 5,0 35 1 ) 10 10,5 T25 100 15

506 155 6,5x 55 * 5,0 35 1 ) 20 10,5 T25 100 15

506 170 6,5x 70 55 5,0 35 1 ) 35 10,5 T25 100 15

506 190 6,5x 90 55 5,0 35 1 ) 55 10,5 T25 100 15

506 245 7,5x 45 * 6,0 35 1 ) 15 12,0 T30 100 15

506 260 7,5x 60 55 6,0 35 1 ) 25 12,0 T30 100 15

506 280 7,5x 80 65 6,0 35 1 ) 45 12,0 T30 100 15

506 297 7,5x100 65 6,0 35 1 ) 65 12,0 T30 100 15

506 298 7,5x120 65 6,0 35 1 ) 85 12,0 T30 100 15

*threaded almost to head

1 )minimum anchoring depth depends of diameter,

see charts left page.

Other sizes up to max. 375 mm can be produced for economical order

quantities.

BiERBACH ® -

concrete Euro screw* type »P«

Screw anchor

for nylon anchor-free fastening in concrete or brickwork

Steel, case hardened, bright galvanized, yellow chromatized

flat head with BiROX ® -drive

Item dim. mm drill anchoring effective head bit contents item x

no. d x l l 1 Ø depth 1 ) length Ø no. pcs. group 100 pcs

boxed

506 330 5,0x 30 * 4,0 25 1 ) 5 8,0 T20 200 15

506 350 5,0x 50 * 4,0 30 1 ) 20 8,0 T20 200 15

506 445 6,5x 45 * 5,0 35 1 ) 10 10,5 T25 100 15

506 455 6,5x 55 * 5,0 35 1 ) 20 10,5 T25 100 15

506 470 6,5x 70 55 5,0 35 1 ) 35 10,5 T25 100 15

506 490 6,5x 90 55 5,0 35 1 ) 55 10,5 T25 100 15

506 545 7,5x 45 * 6,0 35 1 ) 10 12,0 T30 100 15

506 560 7,5x 60 55 6,0 35 1 ) 25 12,0 T30 100 15

506 580 7,5x 80 65 6,0 35 1 ) 45 12,0 T30 100 15

506 597 7,5x100 65 6,0 35 1 ) 65 12,0 T30 100 15

506 598 7,5x120 65 6,0 35 1 ) 85 12,0 T30 100 15

*threaded almost to head

1 )minimum anchoring depth depends of diameter,

see charts page 10.13

Other sizes up to max. 375 mm can be produced for economical order

quantities.

* A BiERBACH ® -product engineered for the whole European market.

New

Line

New

Line

MPA

Tested by the nat. institute for material testing

Dortmund

MPA

Tested by the nat. institute for material testing

Dortmund

drill/screw-in/finished

cutting notches

= easier counter thread

cutting

l 1

drill/screw-in/finished

1

l

d

cutting notches

= easier counter thread

cutting

d

l

l

10.15


Fastening Technique

bracket fastening post anchor fastening

10.16

New

Line

New

Line

drill/screw-in/finished

drill/screw-in/finished

R

cutting notches

= easier counter thread

cutting

l 1

d

cutting notches

= easier counter thread

cutting

l1

d

l

l

Nylon anchor-free direct fastening

on concrete or brickwork

Concrete Euro screws*/threaded studs

removable pipe fastening removable pipe fastening

BiERBACH ® -

concrete Euro screw* type »SK«

Screw anchor

for nylon anchor-free fastening in concrete or brickwork

Steel, case hardened, bright galvanized, yellow chromatized

hexagonal head, ss = spanner width

Item dim. mm drill anchoring effective ss contents item x

no. d x l l 1 Ø depth 1 ) length pcs. group 100 pcs.

boxed

506 630 5,0x 30 * 4,0 25 1 ) 5 8 200 15

506 645 5,0x 45 * 4,0 30 1 ) 15 8 200 15

506 660 5,0x 60 * 4,0 30 1 ) 30 8 200 15

506 745 7,5x 45 * 6,0 35 1 ) 10 10 100 15

506 760 7,5x 60 55 6,0 35 1 ) 25 10 100 15

506 780 7,5x 80 65 6,0 35 1 ) 45 10 100 15

506 797 7,5x100 65 6,0 35 1 ) 65 10 100 15

506 798 7,5x120 65 6,0 35 1 ) 85 10 100 15

506 799 7,5x150 65 6,0 35 1 ) 110 10 100 15

* threaded almost to head

BiERBACH ® -

concrete Euro threaded stud* type »M8«

Stud anchor

for nylon anchor-free fastening in concrete or brickwork

Steel, case hardened, bright galvanized, yellow chromatized

Head with thread M8 and hexagonal collar, ss = spanner width

Item dim. mm drill anchoring effective ss contents item x

no. d x l l 1 Ø depth 1 ) length pcs. group 100 pcs.

boxed

506 841 7,5x 40 * 6,0 35 1 ) 5 12 100 15

506 861 7,5x 60 * 6,0 35 1 ) 25 12 100 15

506 881 7,5x 80 * 6,0 35 1 ) 45 12 100 15

506 897 7,5x100 * 6,0 35 1 ) 65 12 100 15

506 898 7,5x120 * 6,0 35 1 ) 85 12 100 15

* threaded almost to head

1 ) minimum anchoring depth depends of diameter, see charts page 10.13

Other sizes up to max. 375 mm can be produced for economical order

quantities.

* A BiERBACH ® -product engineered for the whole European market.


Nylon anchor-free direct fastening

Window/door frame fastening

Concrete frame screws Fastening Technique

BiROX ® -concrete frame screw »BR«

nylon anchor-free direct fastening in concrete or brickwork

Steel, case hardened, bright galvanized, yellow chromatized,

milling countersunk head and BiROX ® -drive no. 30.

This screw rationalizes and simplifies the mounting of frames. Window

and door frames of wood, PVC and other materials can be tension free

fastened without nylon anchors.

The thread cuts an interlocking forming thread into the anchoring base. These

expansion-free anchors allow short rim and axial distances. The frames should

be provided with pre-drilled holes of 6,2 mm Ø by the manufacturer. After

installing and adjusting the frames, core holes Ø 6 mm are hammer drilled into

the anchoring base. Drive in the concrete screw and finished. Remove wedges

and aiding devices. (Low density materials, cavity blocks and honeycomb

bricks to be drilled only in drilling mode). The screw head can be countersunk if

needed.

Advantages/cost effectiveness:

● tension free frame mounting

● expansion-free anchoring allows short rim distances

● high load capacity due to interlocking thread forming into the anchoring base.

Item dim. mm head contents item x

no. d x l l1 l2 Ø pcs./PU group 100pcs.

boxed; packing unit = 4 boxes

506 860* 7,5 x 60 – – 11,0 100/400 15

506 875* 7,5 x 72 – – 11,0 100/400 15

506 885* 7,5 x 82 – – 11,0 100/400 15

506 890* 7,5 x 92 – – 11,0 100/400 15

506 900* 7,5 x 102 – – 11,0 100/400 15

506 811* 7,5 x 112 – – 11,0 100/400 15

506 812 7,5 x 122 – – 11,0 100/400 15

506 813 7,5 x 132 67 40 11,0 100/400 15

506 815 7,5 x 152 87 40 11,0 100/400 15

506 816 7,5 x 162 87 40 11,0 100/400 15

506 817 7,5 x 182 87 40 11,0 100/800 15

506 819 7,5 x 212 87 40 11,0 100/800 15

* threaded almost to head

BiROX ® concrete frame screw »ZK«

nylon anchor-free direct fastening in concrete or brickwork

Steel, case hardened, bright galvanized, yellow chromatized,

cylinder head Ø 7,5 mm with BiROX ® -drive no. 25.

This concrete frame screw with its extra small cylinder head is designed for

very narrow access situations for fastening. This allows fastenings of aluminium

window frames with its usually small rebate widths. For installation

instructions see BiROX ® concrete frame screw with countersunk head.

Item dim. mm head contents item x

no. d x l l1 l2 Ø pcs./PU group 100pcs.

boxed; packing unit = 4 boxes

506 975* 7,5 x 72 – – 8,0 100/400 15

506 985* 7,5 x 82 – – 8,0 100/400 15

506 990* 7,5 x 92 – – 8,0 100/400 15

506 999* 7,5 x 102 – – 8,0 100/400 15

506 911* 7,5 x 112 – – 8,0 100/400 15

506 912 7,5 x 122 – – 8,0 100/400 15

506 913 7,5 x 132 67 40 8,0 100/400 15

506 917 7,5 x 182 87 40 8,0 100/800 15

506 919 7,5 x 212 87 40 8,0 100/800 15

* threaded almost to head

drill

depth

screw length minimum screw embedded length

material mm 20 30 40 50 60

frame

width

offset

screw

embedde

length

2 x screw

diameter

type »BR«

milling countersunk head

= flush countersinking

of head possible

d

2

l

1

l

l

concrete

sand lime brick

solid brick

pumice*

light concrete*

hollow block* (min. 2 cavities)

* to be drilled only with drilling mode.

type »ZK«

small cylinder head

= suitable for narrow

fastening access

drill/screw-in/finished drill/screw-in/finished

d

2

l

1

l

l

10.17


Fastening Technique

frame mounting with bracket fastening of fire extinguisher

10.18

heavy duty

drill/hammer-in/finished

R

MPA

Geprüft vom staatl. Materialprüfungsamt

Dortmund

New

Line

d

d

l

Nylon anchor-free direct fastening

on concrete or brickwork

Euro – concrete anchor*

Accessories

securing of rock escarpments

BiERBACH ® -Euro concrete anchor* type »A«

for nylon anchor free direct fastening on concrete and brickwork.

Steel, galvanized and yellow chromated, countersunk head

This sturdy BiERBACH ® anchor allows multi-purpose direct fastenings on

brickwork, concrete as well as solid and natural stone. Standard and time

intensive nylon anchor fastenings are now almost unnecessary. Reduced

installation times mean cost savings and therefore competitive advantages for

tradecraft and industry.

The utilisation is very variable and anchors with different head forms have

been developed so that for all possibilities of use an optimum fastener can be

chosen.

The specially developed profile of the shaft guarantees a high pullout value in

the aboye mentioned construction materials.

After pre-drilling with drill Ø 6 mm or Ø 8 mm, the precisely developed anchor

tip allows an easy driving-in of the fastener without damaging the rim of the

drill-hole. The pre-drilled hole is to be approx. 15 mm deeper than the drive-in

depth which in solid base material should be approx. 40 mm.

Typical applications:

This solid anchor type is particularly suited for the fastening of lath constructions

on concrete, solid or natural stone.

This steel anchor, used with clamp plates, is the perfect fastener of wire mesh

to rock formations suffering from erosion and to be restored.

Item dim. mm drill Ø contents item x

no. d x l pcs/PU group 100 pcs.

Steel, galvanised, boxed; packing unit = 4 boxes

610 040 6,1 x 40 6 100/400 15

610 060 6,1 x 60 6 100/400 15

610 080 6,1 x 80 6 100/400 15

610 100 6,1 x 100 6 100/400 15

610 120 6,1 x 120 6 100/400 15

610 140 6,1 x 140 6 100/400 15

610 160 6,1 x 160 6 100/400 15

610 180 6,1 x 180 6 50/200 15

610 200 6,1 x 200 6 50/200 15

610 300 8,1 x 100 8 100/400 15

610 320 8,1 x 120 8 100/400 15

610 340 8,1 x 140 8 100/400 15

610 360 8,1 x 160 8 100/400 15

610 380 8,1 x 180 8 50/200 15

610 399 8,1 x 200 8 50/200 15

Special sizes up to 380 mm length can be produced for economical order

quantities.

Suitable accessory:

BiERBACH ® -clamp plate

Steel, hot-dip galvanised, with reinforced grooving

For fastening of wire mesh to rock formations or concrete with the

BiERBACH ® concrete anchor.

Item dim. mm for contents item x

no. d screws Ø pcs. group 100pcs.

boxed

278 017 65 6,0-8,0 250 15

* A BiERBACH ® -product engineered for the whole European market.


Nylon anchor-free direct fastening

on concrete or brickwork

Euro – concrete anchor*, stud*

Accessories

sign fastening without nylon anchor

BiERBACH ® -Euro concrete anchor* type »B«

for nylon anchor free direct fastening into concrete and brickwork.

Steel, galvanized and yellow chromated, flat round head.

Typical applications:

This anchor type is preferably suited for the economic fastening of signs,

sheet metal profiles, clips, punched strips etc. on concrete, solid and natural

stone. Additionally, installation elements such as cable conduits, distribution

boxes, cable clips as well as piping etc. can be ideally fastened.

Drill, drive-in, fixed!

Item dim. mm drill Ø contents item x

no. d x l pcs/PU group 100pcs.

610 425 4,1 x 25 4 100/400 15

610 440 4,1 x 40 4 100/400 15

610 455 4,1 x 55 4 100/400 15

610 540 6,1 x 40 6 100/400 15

610 560 6,1 x 60 6 100/400 15

610 580 6,1 x 80 6 100/400 15

610 600 6,1 x 100 6 100/400 15

610 640 6,1 x 140 6 100/400 15

610 660 6,1 x 160 6 100/400 15

610 699 6,1 x 200 6 50/200 15

Other sizes can be produced for economical order quantities.

BiERBACH ® -

Euro concrete stud* M6 type »C«

for nylon anchor free direct fastening into concrete or brickwork Steel,

galvanized and yellow chromated, collar Ø 11

Typical applications:

The concrete stud is predominantly suitable for the economic fastening of all

standard installations, which require a metric thread connection.

The metric DIN thread is particularly suited for receiving nuts, ring nuts,

threaded bushings, pipe clips etc.

Item dim. mm drill Ø contents item x

no. d x l l 1 psc/PU group 100pcs.

610 825 4,1 x 25 8 4 100/400 15

610 840 4,1 x 40 8 4 100/400 15

610 855 4,1 x 55 8 4 100/400 15

Other sizes can be produced for economical order quantities.

Suitable accessory:

BiERBACH ® -setting tool

for Euro concrete stud* M6 type »C«

Item contents item x

no. pcs/PU group pcs.

501 001 1/ 10 07

* A BiERBACH ® -product engineered for the whole European market.

sanitary or electrical pipe fastening

New

Line

New

Line

Fastening Technique

drill/hammer-in/finished

drill/hammer-in/finished

l1

MPA

Tested by the nat. institute for material testing

Dortmund

d

MPA

d

l

Tested by the nat. institute for material testing

Dortmund

l

10.19


Fastening Technique

drill hammer-in finished

10.20

Preassembled

drill/hammer-in/finished

R

drill/hammer-in/finished

l

l

D

d

d

Nylon anchor-free direct fastening

Dome head metal anchor

Express anchor

drill hammer-in finished

BiERBACH ® -dome head hammer-in

metal anchor

with/without sealing washer

Made of AIMgSI alloy with pre-assembled corrosion resistant stainless steel

pin. Universally applicable fastener for the fixing of aluminium and sheet metal

profiles, chimney coverings, skylights etc. The BiERBACH ® -hammer-in anchor

is easily and economically used on different construction materials like

concrete, brickwork.

It is very easy to use: position the objects to be joined - pre-drill hole of 5.0

mm, insert anchor, hammer in the corrosion free stainless steel pin, finished.

D= 15 mm, drill Ø =5mm

Item dim. mm anchoring effective contents item x

no. d x l depth length pcs/PU group 100pcs.

boxed; packing unit = 8 boxes

191 426 4,8 x 26 20 6 200/1600 15

191 430 4,8 x 30 20 10 200/1600 15

191 436 4,8 x 36 20 16 200/1600 15

191 440 4,8 x 40 20 20 200/1600 15

Other sizes can be produced for economical order quantities.

BiERBACH ® -express anchor

Tension anchor nail made of spring steel, galvanized, yellow chromated.

The ideal fastening technique made of high quality spring steel for sheet metal

profiles, battened sub-constructions, window frames etc. on concrete (> B25),

solid brick, lime stone and natural stone. Just pre-drill and hammer-in. Load

capacity immediately usable.

Item dim. mm drill anchoring effective contents item x

no. d x l Ø depth length pcs/PU group 100pcs.

boxed; packing unit = 8 boxes

192 049 � 5,0 x 50 5,0 30 20 200/1600 15

192 030 6,0 x 30 6,0 28 2 200/1600 15

192 060 6,0 x 60 6,0 30 30 200/1600 15

192 080 6,0 x 80 6,0 30 50 200/1600 15

192 070 8,0 x 70 8,0 40 30 100/ 800 15

192 090 8,0 x 90 8,0 40 50 100/ 800 15

192 110 8,0 x 110 8,0 40 70 100/ 800 15

192 130 8,0 x 130 8,0 40 90 100/ 800 15

192 150 8,0 x 150 8,0 40 110 100/ 800 15

� If not in stock production possible for economical order quantities.

Stainless steel rustproof products are subject to temporary alloy

surcharges/reductions.


Nylon anchor-free direct fastening

Nail disks

Concrete hammer-in studs, setting tool Fastening Technique

cable clip direct fastening on wall and floor

BiERBACH ® -nail disks

Cable installation with system

• quick and secure mounting of cables on walls

• fixing of different cable diameters

• high stability by straight conduct of nail

• extremely flat disk allows easy plaster covering

• steel nail: hardened and galvanized

• disk: plastic (halogen and silicone free)

Item dim. mm disk contents item x

no. d x l Ø pcs./PU group 100 pcs.

boxed; packing unit = 8 boxes

151 240 2,0 x 40 28 300/2400 15

151 250 2,0 x 50 28 250/2000 15

151 260 2,0 x 60 28 150/1200 15

151 340 3,0 x 40 35 150/1200 15

151 350 3,0 x 50 35 150/1200 15

151 360 3,0 x 60 35 100/ 800 15

151 370 3,0 x 70 35 100/ 800 15

151 450 3,4 x 50 35 150/1200 15

151 460 3,4 x 60 35 100/ 800 15

151 470 3,4 x 70 35 100/ 800 15

nail disks, bulk packed

151 900 28 1000/8000 15

151 901 35 1000/8000 15

BiERBACH ® -concrete hammer-in studs

for nylon anchor-free direct fastening in concrete and brickwork

Steel, hardened, bright galvanized, thread M6 x 8 mm

Item dim. mm contents item x

no. d x l l1 pcs./PU group 100 pcs.

packed in poly bags; packing unit = 10 poly bags per carton

501 015 4,0 x 15 23 50/ 500 15

501 018 4,0 x 18 26 50/ 500 15

501 025 4,0 x 25 33 50/ 500 15

501 030 4,0 x 30 38 50/ 500 15

501 040 4,0 x 40 48 50/ 500 15

Other sizes can be produced for economical order quantities.

Accessory for BiERBACH ® -hammer-in concrete stud:

BiERBACH ® -setting tool

Item contents item x

no. pcs./PU group pcs.

501 001 1/ 10 07

cable fastening one nail disk for several cables

New

Line

d

l

ø

d

l

l1

10.21


Fastening Technique

floor heating conduits advance/return heating conduits

10.22

New

Line

New

Line

R

without drilling/

hammer-in/finished

l

without drilling/

hammer-in/finished

l

d

d

Fixpin »Prof«

Fixpin »Standard«

for conduit + pipe clip fastening

cable fixing with screed replenishment

fastening with

hand protection

BiERBACH ® -fixpin »Prof«

Steel, hardened, blue finish. Large collar ideal for conduit clip sets/

fastening of pipe clips, with grooved shank for tight grip in concrete.

High quality hammer-in stud for plumbing and electrical installations,

fastening of clips for floor heating, cable and pipe clips on concrete, screed

etc.

Quick and cost saving mounting with setting tool ítem no.: 140000 without

predrilling. Fastening of BiERBACH ® -fixpin »Prof« only with setting tool

recommended.

Item dim. mm contents item x

no. d x l pcs./PU group 100 pcs.

boxed; packing unit = 8 boxes

140 014 4,0 x 14 200/1600 15

140 018 4,0 x 18 200/1600 15

140 022 4,0 x 22 150/1200 15

Other sizes can be produced for economical order quantities.

BiERBACH ® -fixpin »Standard«

Steel, hardened, blue finish.

For plumbing and electrical installations, fastening of perforated strip sheet, clips

for floor heating, cable and pipe clips on concrete, screed etc. Quick and cost

saving mounting with setting tool item no.: 140000 without predrilling. Fastening

of BiERBACH ® -fixpin »Standard« only with setting tool recommended.

Item dim. mm contents item x

no. d x l pcs./PU group 100 pcs.

boxed; packing unit = 8 boxes

140 114 4,0 x 14 250/2000 15

140 118 4,0 x 18 250/2000 15

140 122 4,0 x 22 250/2000 15

Other sizes can be produced for economical order quantities.

Accessory for BiERBACH ® -fixpin »Standard« und »Prof«

BiERBACH ® -setting tool with hand protection

Insert BiERBACH ® -fixpin »Standard« or BiERBACH ® -fixpin »Prof« up to the

collar into the setting tool and the fixpin will be clutched in.

Fasten by hammering in.

Only little effort required.

Item contents item x

no. pcs. group ea.

140 000 1 07


Construction-, installation-, spacing

wedges

Aerated concrete nails Fastening Technique

cylindrical nail

conical nail

BiQUICK ® -construction/installation

wedges

Spacing wedges for dry installations, interior works and façade

construction.

BiQUICK ® wedges with their interlocking holding system for secure positioning.

The counter barbs on both sides give this wedge a reliable, firm grip.

The staggered arrangement of the counter barbs of the honey-comb pattern

prevents the side-wards displacement as well as the rotating of the wedges

when driven in. BiQUICK ® construction wedges are produced from high-grade

polyethylene. Therefore, self-expansion as with wooden wedges is not

possible. BiQUICK ® construction wedges are insensitive against rotting,

fungus and temperature changes.

Typical applications: on dry installations for adjusting uneveness, cavities,

interior works with fastenings of wall and ceiling panels, floors, window and

door frames; on façade installations for planks and border profiles as well as

subframings of façade coverings etc.

Item dimension contents item x

no. l x b x h pcs. group box

boxed per 50 pieces

104 523 70 x 40 x 10 50 07

104 524 80 x 34 x 15 50 07

104 522 80 x 50 x 15 50 07

104 521 125 x 50 x 25 50 07

BiPOR ® -aerated concrete nail

Steel, hot-dip galvanised, conical shank,

for direct fastenings on aerated concrete

This square with conical shank hammer-in nail is suitable for fastening

building components made of timber, plastic or thin metal on aerated

concrete. Further applications include mounting of cable conduits, window

joints with metal sheets or linings or coverings of doors. The conical square

shank means the nail wedges itself when driven into aerated concrete.

No twisting is possible.

Item dim. mm contents item x

no. l kg/PU group kg

boxed; packing unit = 10 boxes

195 660 60 1/ 10 15

195 680 80 1/ 10 15

195 700 100 1/ 10 15

195 725 125 1/ 10 15

height adjustment with

BiQUICK ® -construction wedges

MPA

Geprüft vom staatl. Materialprüfungsamt

Dortmund

withoud drilling/

hammer-in/finished

aligning with

BiQUICK ® -construction wedges

l

10.23


Fastening Technique

Application fields:

� indoor constructions by wood and

installation crafts

� fastening of substructures on uneven

grounds

� specially practice proven for refurbishment

of old buildings

� fastening of ceiling coverings

� levelling works on wall elements

� levelling works on planks

� economic fastenings in protected

outdoor areas

� multiple applications on frame

constructions, element installations and

prefabrication of houses

Advantages:

☺ very easy height and side levelling in one go

wood/wood

Application fields:

� levelling works of wood on concrete resp.

brickwork

� spacing works on refurbishment

installations

� fastening of subframes on interior and

outdoor walls

� fastening of substructures on uneven

base materials

� specially practice proven for refurbishment

of old buildings

� levelling works on wall elements

� economic fastenings in protected

outdoor areas

Advantages:

☺ -very easy, stepless space adjustement

without additional works

wood/brickwork

wood/concrete

10.24

R

☺ upto 50% time savings by avoiding

wedge levelling

☺ base construction not to be securely

positioned in advance with construction

aids

☺ very quick and direct level balancing

when mounted afterwards

☺ extra pre-drilling in most cases not

necessary

☺ secure and permanent quality joint

☺ no wedges or levelling parts remain on

substructures

☺ automatic and neat countersinking by

milling countersunk head

☺ specially easy screwing-in and adjusting

due to plastic coating

l

☺ upto 50% time savings by avoiding

additional wedge levelling

☺ base construction not to be securely

positioned in advance with construction

aids

☺ no wedges or levelling parts remain on

substructures

☺ predrilling with standard electric drill

☺ material saving by direct mounting

without additional nylon anchors

☺ high pull-out values due to form tight

joints with base material

☺ very quick level adjustment when

mounting or even afterwards

☺ less anchoring depths required

☺ proven BiROX ® drive for strong and

secure work procedure

d

cutting notches =

improved counter thread

cutting

d

l

Levelling screw type »wood/wood J2«

Levelling screw type »wood/concrete J3«

pre-drill lathing

BiERBACH ® -levelling screw type »J2«

Steel, case hardened, bright galvanized, yellow chromatized, glide coated,

milling countersunk head, BiROX ® drive no. 25, single partial chipboard

threading and thread beneath head

Item dim. recommend levelling drill hole contents item €

no. mm gauge of object space depth pcs./PU group 100pcs.

d x l to fasten in wood

boxed; packing unit = 8 boxes

519 270 6 x 70 25 15 45 100/ 800 15

519 280 6 x 80 30 20 50 100/ 800 15

519 290 6 x 90 30 30 60 100/ 800 15

519 210 6 x 100 30 40 70 100/ 800 15

519 211 6 x 110 30 50 80 100/ 800 15

519 212 6 x 120 30 60 90 100/ 800 15

519 214 6 x 140 30 80 110 100/ 800 15

519 216 6 x 160 30 100 130 100/ 800 15

head Ø = 12 mm. Other sizes can be produced for economical order

quantities.

pre-drill lath and base

BiERBACH ® -

levelling screw type »wood/concrete J3«

Steel, case hardened, bright galvanized, yellow chromatized,

milling countersunk flat head, BiROX ® drive no.30, twin partial

concrete threading and thread beneath head.

Item dim. recommend levelling drill hole contents item €

no. mm gauge of object space depth pcs./PU group 100pcs.

d x l to fasten

verpackt in Kartons; VPE = 8 Kartons

519 390 7,6x 90 30 1 /15 2 20 60 1 /80 2 100/ 800 15

519 311 7,6x110 50 1 /35 2 20 60 1 /80 2 100/ 800 15

519 313 7,6x130 70 1 /55 2 20 60 1 /80 2 100/ 800 15

519 315 7,6x150 70 1 /55 2 20 60 1 /80 2 100/ 800 15

1 concrete / 2 brickwork. Other sizes can be produced for economical order

quantities.

head Ø = 11 mm

1.

1.

2.

screw-in levelling screw at full

length

2.

Levelling screw

wood/wood

3.

set lath at level by unscrewing

Levelling screw

wood/concrete

screw-in levelling screw at full

length 3.

set lath at level by unscrewing


Spacing screw type »D1« Fastening Technique

spacing screw

pre-drill object to be fastened

and anchoring base

1.

set spacing screw and nylon

anchor in base material,

fix object

BiERBACH ® -spacing screw type »D1«

Steel, hardened, bright galvanized, blue chromatized, BiROX ® drive no. 25,

single partial chipboard threading - thread beneath head.

Item dim. mm max. contents item €

no. d x l l1 I2 spacing pcs./PU group 100pcs.

boxed; packing unit = 8 boxes

519 008 6 x 80 41 22 30 100/ 800 15

519 010 6 x 100 41 22 50 100/ 800 15

519 012 6 x 120 41 22 70 100/ 800 15

519 015 6 x 150 41 22 100 100/ 800 15

519 018 6 x 180 41 22 130 100/ 800 15

519 020 6 x 200 41 22 150 100/ 800 15

Other sizes can be produced for economical order quantities.

fitting accessory:

BiERBACH ® -nylon wall anchor

nylon, grey

fitting accessories:

BiROX ® -Power-bits type »First Class«

Item size length contents item €

no. pcs. group ea.

boxed

529 403 T 25 25 100 15

Colour cover or decorative caps

polyethylene, for BiROX ® drive.

These covercaps allow an oblique vertical positionning of upto 30°. Due

to this feature a flush appearance is still achieved also on off-set positioned

screws, i.e. on objects requiring an optically demanding spacing.

Item dim. mm colour contents item €

no. d pcs./PU group 100pcs.

boxed; packing unit = 8 boxes

BiROX ®

drive 25

599 850 13,5 white 250/2000 15

599 852 13,5 brown 250/2000 15

2.

screw-in spacing screw,

finished

Item anchor screws contents item €

no. d x l Ø pcs./PU/pallet group 100pcs.

boxed

170 008 8,0 x 40 4,5 - 6,0 100/ 800/102400 01

3.

Application fields:

� spacing works by wood and installation

crafts

� spacing fastenings of substructures on

uneven grounds

� specially practice proven for refurbishments

of old buildings

� fastening of base laths on ceilings, walls

and floors

� spacing works on windows and wall

elements

� construction of dry ridges

� cost saving constructions in protected

outdoor areas

� multiple applications on frame

constructions, element installations and

prefabrication of houses

Advantages:

☺ one screw type only for construction

materials of wood and brick

☺ tension free spacings from 30 to 150 mm

☺ very fast mounting as no pressure

resistant distances to be fixed in advance

☺ steady maintenance of distance on wood

constructions once fixed

☺ simple pre-drilling with standard

drill Ø 8,0 mm

☺ best work processing on all concrete,

brick and masonry materials

☺ no pre-drilling necessary in soft type

wood, fastening without nylon anchors

☺ also off-set mountings possible

genuine nylon

l1 l2

l

d

d

d

l

10.25


Fastening Technique

10.26

R

BiTHERM ® -

insulation material

supports

Mechanical fastening of

soft insulation materials on

façades.

BiTHERM ® -plaster

insulation anchors

Mechanical fastening of

insulation materials with

subsequent plastering

on renovations and new

constructions.

Fastening of insulation material

Insulation material supports

Insulation material anchors


Insulation fastening

Insulationboard anchors, insulation

mat anchors

Insulation and foam panel clip

Insulation on trapezoidal sheet metal Insulation on wood

BiTHERM ® -insulation sheet anchor

Mechanical fastening of soft and solid insulation materials on brickwork,

concrete and trapezoidal sheet metal. Use Ø 10 mm drill, minimum drilled

depth 40 mm, minimum setting depth 30 mm.

This expansion anchor made of impact resistant synthetic material ensures a

solid grip and sealing of the head avoiding penetration of condensation into

the anchor. The disk head allows flush positioning with good mortar grip.

The anti-slip rings above the expanding section prevent deeper penetration of

the anchor into the drilled hole when hammering in the expansion nail.

The high-grade synthetic type prevents cold bridges.

Item dim. mm insulation material contents item x

no. d x l d1 thickness mm pcs. group 100pcs.

boxed

with synthetic expansion nail

260 070 10 x 70 50 30- 40 250 15

260 090 10 x 90 50 50- 60 250 15

260 110 10 x 110 50 70- 80 250 15

260 130 10 x 130 50 90-100 250 15

260 150 10 x 150 50 110-120 200 15

BiTHERM ® -insulation mat anchor

For the mechanical fastening of insulation material onto brickwork and

concrete (wall facing of up to 2 complete storeys).

The elastic ring section at the tip of the anchor ensures a solid grip. Rapid

mounting of this complete fastening element made of impact resistant plastic

material without additional expansion nail. For fasteners of 130 mm in length

and longer we recommend using a setting tool (round bar Ø 5 mm).

Mounting instructions

1. Drill an Ø 8 mm hole through the insulation material into the wall

2. Drive-in the insulation anchor flush to the material surface

3. Minimum anchoring depth 25 mm.

Item anchor insulation material contents item x

no. d x l d1 thickness mm pcs./pallet group 100pcs.

boxed

262 070 8 x 70 90 30- 40 100 15

262 090 8 x 90 90 50- 60 100 15

262 110 8 x 110 90 70- 80 100/3500 15

262 130 8 x 130 90 90-100 100/3500 15

262 150 8 x 150 90 110-120 100/3500 15

BiTHERM ® -insulation and foam panel clip

Steel, galvanized

For concealed fixing of tongue and groove insulation panels in

stables, cold storage rooms etc.

Item dim. mm insulation material contents item x

Nr. a thickness mm pcs./PU group 100pcs.

boxed; packing unit = 8 boxes

250 015 15 � 60 100/ 800 15

250 025 30 � 80 100/ 800 15

Technically

Approved

Technically

Approved

Fastening Technique

Insulation on façades

Typ S

l

l

d 1

d

d 1

d

a

10.27


Fastening Technique

insulation plastering example of fastening

10.28

drill/hammer-in/finished

~

R

supplied in

complete sets,

ready to be

mounted

FLAME-

RETARDENT

Technically

Approved

l

l

Ø 35

d 1

d

d

Insulation metal anchors

Insulation material anchors

fastening of incompressible insulation material with BiTHERM ® -insulation metal anchor and

insulation disk

BiTHERM ® -insulation metal anchor

Steel, with aluminium-zinc-coating

Fire resistant insulation metal anchors with an anchor head of 35 mm for the

fastening of incompressible insulation material.

This insulation material holder is characterised by its high load resistance

(shear force) and is optimum fire resistance (fire resistance to DIN 4102, class A1).

Pre-drill hole of Ø 8 mm into concrete and solid stone and Ø 6 mm for honeycomb

brick and soft building materials. In aerated concrete up to grade G4, predrilling

is not required.

The anchor is hammered into the pre-drilled hole. The curled shaft presses itself

tight against the hole wall, this creates a friction grip action resulting in a high

tension resistance.

The BiTHERM ® insulation anchor is suitable for the following materials: concrete,

Iight concrete, natural stone, solid stone, porous stone, honeycomb brick, cavity

block, aerated concrete.

Product advantages:

● One piece fastening element

● Anchor entirely made of metal giving a high shear force resistance

● Fire resistance as per DIN 4102, class A1

● High pull out resistance due to the curled shank

● No expanding element required

● Easily pushed through the insulation material without snagging

● Increased corrosion protection due to aluminium-zinc-coating

Item anchor insulation material contents item x

no. d x l thickness pcs./PU/pallet group 100pcs.

boxed; packing unit = 4 boxes

263 202 � 8x140 60 - 90 250/1000/3000 15

263 203 � 8x170 90 -120 250/1000/3000 15

� If not in stock production possible for economical order quantities.

Production in corrosion free stainless steel and size 8 x200 possible

for economical order quantities.

BiTHERM ® -insulation anchor

Expanding element: hammer-in screw nail with BiRAX cross recessed head

Steel, bright galvanized, yellow chromated

Load resistant fastener for insulation material on façades. Consisting of claw

washer and frame-fixing anchor, both made of impact resistant plastic

material. (Drill Ø 8.0 mm, anchoring depth 40 mm). The regulations according

to DIN 1055 (design loads for buildings) should be observed. These insulation

anchors are supplied in complete sets.

Item anchor insulation material contents item x

no. d x l d1 thickness mm sets group 100 sets

boxed

271 080 8 x 80 80 40- 60 250 15

271 100 8 x 100 80 60- 80 250 15

271 120 8 x 120 80 80-100 250 15


Insulation material fastening

Insulation material nail

Retaining disks

hall timber frame construction

Suitable accessory for BiZI ® -insulation material nail

insulation material on wood

BiZI ® -insulation material nail

Steel, natural hardness, zinc plated (zinc coat thickness

12 – 15 µ = increased corrosion protection), medium strong shank.

The official approval (certificate no. Z 9.1 - 196) has been

replaced by the certificate of classification for special nails

as per DIN 1052, part 2, load capacity III (!)

In combination with BiTHERM ® retaining disks for the mechanical fastening of

soft and incompressible insulation materials in sheets or layers (glass wool,

stone wool, polystyrene) on a timber frame base. The minimum setting depth

is 48 mm, however, maximum of 80 mm only should be considered in the

calculations.

Item dim. mm LK* DS** contents item x

no. d n l n d1 l1 D pcs./PU group 100pcs.

boxed; packing unit = 4 boxes

697 111 2 6,0 110 6,5 80 11,5 1 30- 60 250/1000 3 15

697 151 2 6,0 150 6,5 80 11,5 2 70-100 250/1000 3 15

697 181 2 6,0 180 6,5 80 11,5 3 100-120 250/1000 3 15

697 211 2 6,0 210 6,5 80 11,5 4 140-160 250/1000 3 15

697 231 2 6,0 230 6,5 80 11,5 5 150-180 250/1000 3 15

697 261 2 6,0 260 6,5 80 11,5 6 180-210 125/ 500 4 15

697 281 2 6,0 280 6,5 80 11,5 7 200-230 125/ 500 4 15

697 301 2 6,0 300 6,5 80 11,5 8 220-250 125/ 500 4 15

697 326 2 6,0 325 6,5 100 11,5 25 250-270 125/ 500 4 15

697 351 2 6,0 350 6,5 100 11,5 35 270-300 125/ 500 4 15

697 381 2 6,0 380 6,5 100 11,5 38 300-330 125/ 500 5 15

* LK = length index

** DS = insulation material thickness

2 certificate of classification no. KA 097

3 = 16.500 pcs/pallet

4 = 10.500 pcs/pallet

5 = 10.000 pcs/pallet

BiTHERM ® -retaining disk

Steel, zinc plated, with reinforcing ribs

For façades, roofs, and specially for fastening of insulation material on timber

structures.

Item dim. mm contents item x

no. d for nail Ø pcs. group 100pcs

boxed

278 017 65 6,0 250 15

Production in corrosion free stainless steel possible for economica

order quantities.

Fastening Technique

Technically

Approved

LOAD CAPACITY

CLASS III

AS PER DIN 1052,

PART 2

KA 042

BWU 02

KA 097

BWU 02

D

dn

d1

1

l

FLAME-

RETARDENT

n

l

d

10.29


Fastening Technique

10.30

Your competent BiERBACH ® -trade partner:

R

The perfect connection


Sales and delivery terms

§ 1 Validity of the conditions, contract agreements

1. These sales and delivery terms and conditions are valid for all deliveries, performances,

and offers of the vendor. Business or delivery terms and conditions

of the purchaser which conflict with these business terms or complement

these terms will not be recognised. Their inclusions are hereby excluded.

2. AII quotations given are not offers capable of acceptance so as to make a binding

contract.

3. Clarifications of orders and all orders placed require written contract acceptance

from the vendor before any contract arises.

4. Variations from these business terms and conditions and any other modifications

or oral variations will first become effective when authorised in writing by

the vendor.

§ 2 Date of delivery, act of god

1. Deliveries will be effected subject to the proviso of delivery possibility.

2. If the delivery is delayed, hindered or prevented due to an act of god, unforeseen

breakdown, shortage of raw materials or other cause whatsoever, for

which the company is not responsible, the time of delivery shall at the vendors

option be extended accordingly even if contractually agreed. If the delivery

from the vendor under such circumstances is no longer possible or no longer

reasonable the vendor shall be entitled to cancel part or in whole the agreement.

3. If the delay exceeds two months the purchaser is entitled after reasonable

rescheduling with respect to the still unfulfilled part to cancel the agreement.

4. If the vendor is responsible for the delay the amount of damages claimed from

the purchaser due to the delay for one agreement are restricted to a value of

5 % of the invoicing value of the effected agreement. Claims in excess of this

are hereby excluded, except when the delay can be attributed to negligence

or intent of the vendor.

§ 3 Prices

AII prices are net and do not include the legally required VAT. AII prices quoted

are ex works and are valid for up to 60 days after receipt of contract agreement.

On expiry of this period the vendor is entitled to alter the prices after receipt of

contract agreement if the costs to the vendor have changed beyond vendor's

fault.

The carriage costs and the costs of the packaging are separately shown on the

invoice and for the purchaser's account. Packaging material can not be returned.

§ 4 Delivery quantities, special productions

1. The vendor is entitled to part deliveries in reasonable amounts.

2. On agreements with successive deliveries the goods are to be accepted if

possible in equal monthly amounts during the contract. The vendor is entitled

for delayed call-off after fruitless rescheduling to arrange the division of the

delivery at his own discretion. The vendor reserves the option that under these

circumstances to be able cancel part of the agreement or be entitled to damages

due to the purchasers failure of performance.

For special productions as well as for large order quantities delivery tolerances

of plus/minus up to 10% of the order are permitted.

§ 5 Transfer risk

The risk of accidental loss will be borne by the purchaser as soon as the transfer

to the responsible transporter is effective or by dispatch on leaving the vendors

storage. This is equally valid for shipments performed by the vendor's personnel

either in whole or in part.

§ 6 Terms of payment

1. The vendors invoices are payable within 10 days after invoice date minus 2%

trade discount or within 30 days without trade discount.

2. The payment is considered valid only once the vendor has the amount at his

disposal. Authoritative for the payment per exchange transfer or cheque is the

definitive redeemability. The vendor is only obliged to accept exchange transfer

on the basis of special agreement. The bank charges are for the purchaser's

account.

3. Should the purchaser be in arrears with payments, the vendor can demand

interest of 1% per month over the current bank discount rate of the German

Bundesbank.

4. With established reasons of a substantial worsening of the purchasers financial

position, in particular due to cessation of payment, cheque or exchange

transfer protests or payment delays, the vendor ís entitled to fulfilment ,step

by step, or to demand additional securities. After frustrated demands the vendor

is entitled to cancel the agreement and under retention of title of ownership,

to repossess delivered goods at the expense of the purchaser.

5. The purchaser is only entitled to the counterbalance if his counterclaim is

undisputet or legally established.

AII rights, in particular the rights to reproduce and circulate, are reserved by the

producer. No part of this catalogue may be reproduced in any other form -

through photocopying, microfilming, or any other format - or transmitted or translated

into a language used by machine, specially that of data processing equipment.

No liability is accepted for content completeness, errors including technical alterations

and additions.

§ 7 Extended and prolonged retention of title of ownership

1. Delivered goods remain the property of the vendor until full payment of the

purchase price has been fully received (all right reserved merchandise). The

delivered goods remain also the property of the vendor until the purchaser has

met all agreements of the contract.

2. The purchaser in entitled to dispose of the proviso goods in a correct business

routine. As disposal is also included the application of the proviso goods to fulfil

delivery and works contracts. Prerequisite for these rights is however that the

purchaser reserves the rights of ownership on resale and that the obligations of

the resale according to item 3 are passed back to the vendor.

3. The purchaser assigns the existing resale obligations to the vendor. With disposal

together with other goods the obligations in part are assigned, for the

proviso goods value in relationship corresponding to the other goods. The

assigned obligations serve in the same way as security as for the proviso

goods.

4. The vendor authorises the purchaser that the assigned obligations to the vendor

for his invoices can be collected in the purchaser's name. The authority to

collect a direct debit can only be revoked when the purchaser does not fulfil

his payment obligations in a regular manner.

5. In the event of any breach or non-performance by the purchaser, in particular

for non-payment in respect to the previously agreed obligations or cessation

of payments, the vendor is entitled that the assigned above obligations are

given in warning to the debtor. Moreover the vendor is than entitled to prohibit

the subsequent further action with the delivered goods, to repossess the proviso

goods or if required dispute surrendered claims against third parties. The

re-possession of proviso goods shall not be deemed to waive the agreements

of the contract, unless the consumer credit regulations are deemed to apply.

6. Any subsequent further action with the proviso goods happens on behalf of

the vendor as manufacturer. The new matter becomes a proviso goods. Lapses

the right of ownership of the vendor due to compounding, mixing or further

action the purchaser adopts immediately his entitled rights of ownership in

proportion to the invoice value of the proviso goods with respect to the invoice

value of the other applicable goods as right of ownership. Compensation

for damages for loss of goods ownership assigns the purchaser as well too

the vendor as security.

7. If the value of the assigned securities of the safeguarded obligations exceeds

in total more than 20% the vendor is obligated in so far as claims from the

purchaser at his request to release the securities.

§ 8 Warranty

1. Notification of damage or shortage must be send to the vendor in writing,

immediately or at the latest within 8 days after receipt of the goods. Defects,

which could not be discovered even after careful checking within this period,

are to be immediately notified to the vendor in writing.

2. Is the notification of damage or shortage timely and correctly justified the vendor

will begin with a subsequent delivery of the complained goods. In case of

failure of subsequent delivery within the adequate time span the purchaser

can by his choice claim compensation discount (reduction) or cancel the agreement

(contract changes).

3. Any further warranty rights are herewith excluded, so long as the defect is not

based on a property failure.

§ 9 Limited liability

The liability of the vendor for defective products, in accordance with the law of

Liability of Defective Products remains unrestricted. Otherwise claims for damages

for impossible performance, positive obligation damages, debt at end of contract

and by unauthorised handling are excluded unless the vendor or authorised

agents have deliberately or negligently acted.

§ 10 Applicable law, place of jurisdiction

1. For these business agreements and for all legal rights and obligations between

the vendor and the purchaser shall be governed by the laws of Germany.

The validity of unified sales right (UN sales right) is herewith excluded.

2. AII possible legal differences arising from this contract will have Unna as place

of exclusive jurisdiction, if the purchaser is a fully qualified merchant, a legal

person under public law or public special fund. The vendor is, however, also

authorised to claim against the purchaser in his home locality.

Imprint

Publisher: BiERBACHGmbH & Co. KG Befestigungstechnik

Rudolf-Diesel-Strasse, D-59425 Unna

Composition: cd-protype, Claus Deichmüller, Dortmund

44357 Dortmund, Kammerstück 19


Fastening Technique

R

Quick delivery service:

Direct contact

Fax: 00 49/23 03/28 02-143

E-mail: info @ bierbach.de

Internet: http://www.bierbach.de

BiERBACH ® GmbH & Co. KG Rudolf-Diesel-Straße POB 12 50 Phone: 00 49/23 03/28 02-0

Befestigungstechnik D-59425 Unna D-59402 Unna Fax: 00 49/23 03/28 02-129

BiERBACH ® -trade partner: BiERBACH ® -customer consultant:

BIERBACH ® can supply this flyer with

the trade partner’s logo at cost price.

10 Fastening technology

Produktion programm

Fastening technique

20 Timber construction technology

50 Powder actuated fastening technology

30 Nail technology

The perfect connection

40 Screw technology

10 Fastening technology 30 Nail technology 40 Screw technology

20 Timber construction 50 Powder actuated

technology fastening technology

by

1.500 DD 01/05

More magazines by this user
Similar magazines