Catalog 2018

325-65
PREMIO TOOLS FOR PROFESSIONALS
TPC end mill for long and short-chipping stainless materials.
Especially suitable for processing TITAN and INCONEL.
Quiet running due to odd number of blades.
Solid carbide end mill, TPC, Z5, TiAlN-X, 40°
Art No.
6,0 25 18 62 6 5,8 325-65- 060-32 1
8,0 30 24 68 8 7,8 325-65- 080-32 1
10,0 35 30 80 10 9,8 325-65- 100-32 1
12,0 45 36 93 12 11,8 325-65- 120-32 1
16,0 55 48 108 16 15,8 325-65- 160-32 1
20,0 70 60 126 20 19,8 325-65- 200-32 1
HB
• with free grinding
• TiAlN-X coated
• stabilized cutting edge
• dynamic helix
• for finishing operation
Free grinding
Solid carbide mill
Works std.
Important instructions
The recommended guideline values ​must be
adapted to the actual conditions on site. The
table values ​correspond to the selected applications.
For other applications, change the feeds
according to the indicated factor and the speed,
from a change of more than
30%, in parallel with.
ap
ae
ap
ae
Finishing ae from factor 0,2 from Ø
ap=0,5 x Ø feed x 1,2
ap=1,0 x Ø feed like table
ap=1,5 x Ø feed x 0,8
ap=2,0 x Ø feed x 0,7
Finishing ae from factor 0,1 from Ø
ap=0,5 x Ø feed x 1,3
ap=1,0 x Ø feed x 1,2
ap=1,5 x Ø feed like table
ap=2,0 x Ø feed x 0,8
Vc
M1 255
Ø 6 8 10 12 16 20
fz 0,055 0,065 0,080 0,100 0,130 0,170
S 13.530 10.150 8.120 6.765 5.070 4.060
F 4.465 3.960 3.900 4.060 3.960 4.140
M2 155 S 8.220 6.170 4.930 4.110 3.080 2.470
fz 0,055 0,065 0,080 0,100 0,130 0,170
F 2.710 2.405 2.370 2.470 2.405 2.520
S1 180
S2 90
fz 0,065 0,075 0,100 0,120 0,150 0,200
S 9.550 7.160 5.730 4.775 3.580 2.865
F 3.730 3.220 3.440 3.440 3.220 3.440
fz 0,055 0,065 0,080 0,100 0,130 0,170
S 4.775 3.580 2.865 2.390 1.790 1.430
F 1.580 1.400 1.375 1.430 1.400 1.460
ap
ae
Finishing ae from factor 0,05 from Ø
ap=0,5 x Ø feed x 1,7
ap=1,0 x Ø feed x 1,5
ap=1,5 x Ø feed x 1,3
ap=2,0 x Ø feed like table
197