Catalog 2018

384-62
PREMIO TOOLS FOR PROFESSIONALS
Solid carbide ball nose end mill, Z2, Color, 30°
Ball nose end mill for long and short chipping materials, for form
and slot milling. Extra high accuracy D1 = f8.
Geometry for aluminum and plastics.
• extremely smooth color coated
• with free grinding
• lapped
Art No.
HA
3,0 9 4 50 6 2,8 384-62- 030-41 1
4,0 12 5 50 6 3,8 384-62- 040-41 1
5,0 15 6 57 6 4,8 384-62- 050-41 1
6,0 18 7 57 6 5,6 384-62- 060-41 1
8,0 26 9 63 8 7,5 384-62- 080-41 1
10,0 32 11 72 10 9,5 384-62- 100-41 1
12,0 40 13 80 12 11,5 384-62- 120-41 1
Free grinding
Solid carbide mill
DIN
6527
Important instructions
The recommended guideline values ​must be
adapted to the actual conditions on site. The
table values ​correspond to the selected applications.
For other applications, change the feeds
according to the indicated factor and the speed,
from a change of more than
30%, in parallel with.
ae
ap ap max= 0,02 x D
ae max= 0,02 x D
Roughing
Vc
N1 800
N2 600
N2 500
N2 450
N3 180
N 300
N 220
Ø 3 4 6 8 10 12
fz 0,012 0,030 0,040 0,050 0,065 0,080
S 84.880 63.660 42.440 31.830 25.460 21.220
F 2.040 3.820 3.400 3.180 3.310 3.400
fz 0,010 0,024 0,032 0,040 0,052 0,064
S 63.660 47.750 31.830 23.870 19.100 15.920
F 1.220 2.290 2.040 1.910 1.990 2.040
fz 0,008 0,019 0,026 0,032 0,042 0,051
S 53.050 39.790 26.530 19.890 15.920 13.260
F 810 1.530 1.360 1.270 1.320 1.360
fz 0,007 0,017 0,023 0,029 0,037 0,046
S 47.750 35.810 23.870 17.900 14.320 11.940
F 660 1.240 1.100 1.030 1.070 1.100
fz 0,006 0,016 0,021 0,026 0,034 0,041
S 19.100 14.320 9.550 7.160 5.730 4.770
F 240 450 400 370 390 400
fz 0,006 0,027 0,036 0,045 0,059 0,072
S 31.830 23.870 15.920 11.940 9.550 7.960
F 360 1.290 1.150 1.070 1.120 1.150
fz 0,005 0,024 0,032 0,041 0,053 0,065
S 23.340 17.510 11.670 8.750 7.000 5.840
F 240 850 760 710 740 760
211