Catalog 2018

351-62
PREMIO TOOLS FOR PROFESSIONALS
Multimill for long and short-chipping materials.
Universal applications for chamfering, deburring,
lateral milling and engraving.
Solid carbide multimill, Type UNI, Z2, 60°
• long version
• stabilized cutting edge
• uncoated
Art No.
HA
3,0 6 6 50 4 351-62- 030-41 1
4,0 8 8 50 4 351-62- 040-41 1
5,0 10 10 50 6 351-62- 050-41 1
6,0 12 12 58 6 351-62- 060-41 1
8,0 16 16 63 8 351-62- 080-41 1
10,0 18 18 72 10 351-62- 100-41 1
12,0 20 20 83 12 351-62- 120-41 1
16,0 26 26 92 16 351-62- 160-41 1
20,0 32 32 104 20 351-62- 200-41 1
Solid carbide mill
Works std.
Important instructions
The recommended guideline values ​must be
adapted to the actual conditions on site. The
table values ​correspond to the selected applications.
For other applications, change the feeds
according to the indicated factor and the speed,
from a change of more than
30%, in parallel with.
Vc
P1 75
P2 70
P3 60
M1 35
M2 25
K1 35
N1 150
Ø 3 4 6 8 10 12 16 20
fz 0,012 0,019 0,028 0,036 0,047 0,058 0,068 0,095
S 7.960 5.970 3.980 2.980 2.390 1.990 1.490 1.190
F 190 220 220 210 670 690 610 680
fz 0,010 0,015 0,022 0,029 0,037 0,046 0,055 0,076
S 7.430 5.570 3.710 2.790 2.230 1.860 1.390 1.110
F 140 170 170 160 500 510 460 510
fz 0,008 0,012 0,018 0,023 0,030 0,037 0,044 0,061
S 6.370 4.770 3.180 2.390 1.910 1.590 1.190 950
F 100 110 110 110 340 350 310 350
fz 0,007 0,011 0,016 0,021 0,027 0,033 0,039 0,055
S 3.710 2.790 1.860 1.390 1.110 930 700 560
F 50 60 60 60 180 190 170 180
fz 0,006 0,010 0,015 0,019 0,024 0,030 0,035 0,049
S 2.650 1.990 1.330 990 800 660 500 400
F 30 40 40 40 120 120 110 120
fz 0,006 0,019 0,028 0,036 0,047 0,058 0,068 0,095
S 3.710 2.790 1.860 1.390 1.110 930 700 560
F 40 100 100 100 310 320 290 320
fz 0,005 0,019 0,028 0,036 0,047 0,058 0,068 0,095
S 15.920 11.940 7.960 5.970 4.770 3.980 2.980 2.390
F 160 450 450 430 1.340 1.380 1.220 1.360
214