Catalog 2018

324-62
PREMIO TOOLS FOR PROFESSIONALS
HPC end mill for drilling and grooving with
large chip space for long-chipping soft materials.
Solid carbide end mill, HPC, Z2, 25°
Art No.
4,0 18 11 57 6 3,7 324-62- 040-41 1
6,0 20 13 57 6 5,5 324-62- 060-41 1
8,0 26 19 63 8 7,5 324-62- 080-41 1
10,0 29 22 72 10 9,2 324-62- 100-41 1
12,0 36 26 83 12 11,0 324-62- 120-41 1
16,0 42 32 92 16 15,0 324-62- 160-41 1
HA
• speciel geometry for aluminium
• stabilized cutting edge
• with free grinding
• protective chamfer 45°
• lapped and uncoated
• for finish-/roughing operation
Free grinding
Solid carbide mill
DIN
6527
Important instructions
The recommended guideline values ​must be
adapted to the actual conditions on site. The
table values ​correspond to the selected applications.
For other applications, change the feeds
according to the indicated factor and the speed,
from a change of more than
30%, in parallel with.
ap
ap
ae
ap
ae
Full groove roughing ae
ap=0,5 x Ø feed like table
ap=1,0 x Ø feed x 0,7
ap=1,5 x Ø feed x 0,5
ap=2,0 x Ø feed x 0,3
Roughing ae from factor 0,5 from Ø
ap=0,5 x Ø feed x 1,2
ap=1,0 x Ø feed like table
ap=1,5 x Ø feed x 0,8
ap=2,0 x Ø feed x 0,7
Finishing ae from factor 0,2 from Ø
ap=0,5 x Ø feed x 1,3
ap=1,0 x Ø feed x 1,2
ap=1,5 x Ø feed like table
ap=2,0 x Ø feed x 0,8
Vc
N1 180
N2 140
N2 105
N2
N3 85
N 70
N 80
Ø 4 6 8 10 12 16
fz 0,019 0,028 0,036 0,047 0,058 0,068
S 14.320 9.550 7.160 5.730 4.770 3.580
F 540 540 520 540 550 490
fz 0,015 0,022 0,029 0,037 0,046 0,055
S 11.140 7.430 5.570 4.460 3.710 2.790
F 330 330 320 330 340 310
fz 0,012 0,018 0,023 0,030 0,037 0,044
S 8.360 5.570 4.180 3.340 2.790 2.090
F 200 200 190 200 210 180
fz
S
F
fz 0,010 0,015 0,019 0,024 0,030 0,035
S 6.760 4.510 3.380 2.710 2.250 1.690
F 130 130 130 130 130 120
fz 0,009 0,013 0,017 0,022 0,027 0,032
S 5.570 3.710 2.790 2.230 1.860 1.390
F 100 100 90 100 100 90
fz 0,008 0,012 0,015 0,020 0,024 0,029
S 6.370 4.240 3.180 2.550 2.120 1.590
F 100 100 100 100 100 90
201