Instruction manual for VERSATO collection
Doc. VSBAEN-Rev2 (31.07.2018)
Doc. VSBAEN-Rev2 (31.07.2018)
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
22<br />
CHARGING EASYPOWER (OPTIONAL BATTERY)<br />
CAUTION:<br />
Possible damage to EASYPOWER<br />
EASYPOWER will be damaged if its contact points touch<br />
metal.<br />
> Avoid EASYPOWER’s contact points to touch metal.<br />
For use<br />
Only charge EASYPOWER (LLPS-7S PIPP) when the beep signal<br />
sounds. This shows that EASYPOWER has critical battery<br />
levels.<br />
> Use in dry surroundings only! EASYPOWER may not get<br />
damp or wet.<br />
> Use and charge battery at an ambient temperature of +5°C<br />
to +30°C only. Let cool down after heavy strain.<br />
> Risk of short circuit! When disposing, transporting or<br />
storing EASYPOWER, make sure to pack it or to mask all<br />
contacts. Store in dry and cool place only.<br />
> Do not ever open EASYPOWER. Service should be per<strong>for</strong>med<br />
by trained personnel only.<br />
> Only use the delivered charger.<br />
> Do not expose battery to intense heat (e.g. direct sunlight or<br />
fire)<br />
> Do not place battery in microwave or high-pressure container.<br />
Disposing of EASYPOWER<br />
Our battery system was produced following the Directive<br />
2002/96 EC. The Directive controls waste of electric and<br />
electronic equipment to protect and improve the quality of the<br />
environment in a sustainable way. You can emit your battery<br />
packs at <strong>collection</strong> points based on local requirements.