OsTech electro-optical-instruments Laser- und ... - Hy-Line

More documents

Recommendations

Info

��
�� The Diode-Laser-Source 'DioSrc01' Laser Driver and Temperature-Controller is a high precision, safe and cost effective solution for driving Diode Lasers in CW and pulse modes. The Driver supplies a constant current to the laser. But if you have any photodiode signal you can also control for constant power (in CW- Mode). With its compliance voltage of 6V for example, two laser diodes can be operated simultaneously, with 12V compliance up to 5. The Driver can be completely controlled by the RS232 serial interface. You can freely set Current ,Voltage and Temperature Limits. The Device contains an On- Board Oscillator which you can freely configure for pulsing the Laser or you may configure the Device to modulate the Laser via the Digital Inputs. The Temperature-Controllers realise a PID-Control- Loop. The temperature sensor can be of NTC (standard), silicon or other types and will be adjusted by software. Every device has passed our 24h Full Power Burn in and several safety tests for proving static discharge and transient protection. ��
Page 1 and 2: OsTech electro-optical-instruments
Page 3 and 4: ��
Page 11 and 12: ��
Page 13 and 14: ��
Page 15 and 16: ��
Page 17 and 18: ��
Page 19: ��
Page 23 and 24: ��
Page 25 and 26: ��
Page 27 and 28: ��
Page 29 and 30: ��
Page 31 and 32: ��
Page 33 and 34: ��
Page 35 and 36: ��
Page 37 and 38: ��
Page 39 and 40: ��
Page 41: ��

OsTech electro-optical-instruments Laser- und ... - Hy-Line

Create successful ePaper yourself

Delete template?

Save as template?