OsTech electro-optical-instruments Laser- und ... - Hy-Line

�����
������
�������������������������������
���
�� ��������
�� ������������
��
�������������������������������������������������������������������
�����������������
No Code Parameter min max def U Type Description
1 LC Laser-Current Commands
2 LCL (ff.ff):ret 0 Imax+5% Imax+5% mA float Current Limit
3 LCT (ff.ff):ret 0 Imax 0.00 mA float Current Target
4 LCA :ret mA float Current Actual
5 L (R | S):ret bool Laser (Run | Stop)
6 xTA (xx.xx):ret -20.00 60.00 20.00 °C float Temp. Actual
7 LTM (xx.xx):ret -20.00 60.00 35.00 °C float Laser Temp. Maximum
8 LG (R | S):ret 0 bool Gate Option
9 LP Laser-Photo Current and -Power Commands
10 LPCA :ret 0.00 20.00 0.00 µA float Laser Photo Current Actual
11 LPCT (xx.xx):ret 0.00 20.00 0.00 µA float Laser Photo Current Target
12 LPCC (R | S):ret S Bool Laser Photo Current Control
13 LPA :ret 0.00 W float Laser Power Actual
14 LPT (xx.xx):ret 0.00 W float Laser Power Target
15 LPF :ret bool Laser Power Fix Procedurre
16 LPCCC :ret bool Laser Ph.Cur.Ctrl.Calibrate
17 LV Laser-Voltage Commands
18 LVA :ret 0 6.00 V float Actual Laser Voltage
19 LVC (ff.ff):ret 1.2 6.00 V float Compliance Voltage
20 LM Laser-Modulation Commands
21 LMW (wwwww):ret 100 2^32 1000 µs word Mod. Width
22 LMP (wwwww):ret LMW+100 2^32 2000 µs word Mod. Period (internal mod.)
23 LMDI (R | S) 0 bool Mod. Digital Internal
24 LMDX (R | S) 0 bool Mod. Digital External
25 LMDIC Wwwww:ret 0 64000 0 word Puls Number in Sequence
26 LMDIO Wwwww:ret 0 64000 0 word Suppressed No. of Pulses
27 LMDXN (R | S) S bool Negates Dig.Mod.Input if Set
28 LMAX (R | S) 0 bool Mod. Analog External
29 x Peltier Commands (x=L-Laser | x=C-Crystal) only for peltier version
30 xTT (xx.xx):ret -20.00 60.00 20.00 °C float Temp. target
31 xTA (xx.xx):ret -20.00 60.00 20.00 °C float Temp. Actual
32 xTLU (xx.xx):ret -20.00 60.00 40.00 °C float Upper Temp. limit
33 xTLL (xx.xx):ret -20.00 60.00 0.00 °C float Lower Temp. Limit
34 xTSC (fffff):ret float Temp.-Sensor Coefficients
35 xTCCK (fffff):ret 2.00 float Temp.-Controller k-Faktor
36 xTCCN (fffff):ret 60.0 s float Temp.-Contrl. integral Time
37 xTCCV (fffff):ret 1.00 s Temp.-Contrl. derivative T.
38 xTC (R | S) def bool Temp.-Controller (Run|Stop)
39 xTCA (ffff):ret -Ipmax IPmax 0 float LT Current Actual
40 xTCL (ffff):ret -IPmax IPmax IPmax mA float LT Current Limit
41 xTVA :ret V float LT Voltage Actual
42 G General Commands
43 GD :ret proc Set Defaults
������������ ����� ���������������������