OsTech electro-optical-instruments Laser- und ... - Hy-Line

More documents

Recommendations

Info

��
�� Thank you for your interest in our laser-diode and temperature controllers. Our devices are high-quality advanced products and we give our best that you will enjoy the work with it. Please read this operation manual carefully before switching on the DioSrc01 device and pay attention to the safety instructions given here. In order to obtain optimum performance from your DioSrc-Module follow the installation and operating instructions. Please note that unauthorized opening of the DioSrc01 cancels the two year warranty. If you should have any questions or problems, please contact our service staff. In most cases our lasers are driven by an advanced microprocessor-controlled power supply with many safety features for reliable operation of the laser diode. The serial interface of the power supply allows external computer-controlled operation for elaborate experiments. New Features Rev:04 � Now the external Fan Voltage can be controlled from 1.2-24V at a maximum currents of 300mA, see 'GF'- 'GFD'-commands � The internal Fan is now permanetly controlled � We implemented for RS232 communication 'between' the standard Echo Mode and the binary Mode a reduced Echo Mode � The TEC Voltage can be checked by 'LTVA'-command ��
Page 1 and 2: OsTech electro-optical-instruments
Page 3 and 4: ��
Page 11 and 12: ��
Page 13 and 14: ��
Page 15 and 16: ��
Page 17 and 18: ��
Page 19 and 20: ��
Page 21: ��
Page 25 and 26: ��
Page 27 and 28: ��
Page 29 and 30: ��
Page 31 and 32: ��
Page 33 and 34: ��
Page 35 and 36: ��
Page 37 and 38: ��
Page 39 and 40: ��
Page 41: ��

OsTech electro-optical-instruments Laser- und ... - Hy-Line

Create successful ePaper yourself

Delete template?

Save as template?