REVIT IFC MANUAL

Recommendations

Info

18 | Autodesk Revit IFC manual 4.1 Mapping table The mapping table for IFC imports is structured in a similar way to the export mapping table and can be called up via Revit > Open > IFC options: 4.2 Import options The Open dialog window offers a few options that can help you handle IFC files in Revit. INSTRUCTIONS FOR REVIT USERS
19 | Autodesk Revit IFC manual AutoJoin elements connects walls, supports and other elements automatically using the same approach as that applied in the Revit modeling. This can lead to undesirable results for complex structures or long export times, so this option can be disabled if necessary. Correct lines that are slightly off axis is an option that will be familiar from the link/ import CAD function, and seeks to correct elements that deviate slightly from the main axis. This option can be disabled if necessary, as it can lead to problems with elements which are meant to be off axis, like site boundaries for example. The quality of the imported data depends not only on the import settings, but also to a large degree on the export settings and the modeling method applied in the original software. The Revit–IFC import interface is regularly updated together with the export module, but is also subject to the limits of technical feasibility and the IFC format. It is not possible for a standardized format to transfer complex parametrics and contexts. For example: To create a floor slab in Autodesk Revit, a profile is sketched and is generated (or extruded) at a right angle to the profile, taking into account the component types and the defined layer thickness. Autodesk Revit generates standard floor slabs on the basis of this principle. Essentially, in most cases this workflow represents a good working basis. If IFC data have to be processed further, one should always expect the loss of data in comparison with the original software. This approach is very similar to that seen in the IFC schema, and typically gives optimum results, generating clean standard floor slabs in Revit. INSTRUCTIONS FOR REVIT USERS
Page 1 and 2: Revit IFC manual Detailed instructi
Page 3 and 4: 3 | Autodesk Revit IFC manual 1. IN
Page 5 and 6: 5 | Autodesk Revit IFC manual 2. TH
Page 7 and 8: 7 | Autodesk Revit IFC manual IFC4:
Page 9 and 10: 9 | Autodesk Revit IFC manual 2.4.1
Page 11 and 12: 11 | Autodesk Revit IFC manual 2.4.
Page 13 and 14: 13 | Autodesk Revit IFC manual As s
Page 15 and 16: 15 | Autodesk Revit IFC manual 2.6
Page 17: 17 | Autodesk Revit IFC manual 4. O
Page 21 and 22: 21 | Autodesk Revit IFC manual 5. E
Page 23 and 24: 23 | Autodesk Revit IFC manual here
Page 25 and 26: 25 | Autodesk Revit IFC manual The
Page 27 and 28: 27 | Autodesk Revit IFC manual Leve
Page 33 and 34: 33 | Autodesk Revit IFC manual Plea
Page 35 and 36: 35 | Autodesk Revit IFC manual This
Page 39 and 40: 39 | Autodesk Revit IFC manual Incl
Page 43 and 44: 43 | Autodesk Revit IFC manual 6 US
Page 45 and 46: 45 | Autodesk Revit IFC manual Over
Page 51 and 52: 51 | Autodesk Revit IFC manual Duri

REVIT IFC MANUAL

Create successful ePaper yourself

Delete template?

Save as template?