REVIT IFC MANUAL
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
50 | Autodesk Revit <strong>IFC</strong> manual<br />
Default name after <strong>IFC</strong> export<br />
Level name with additional notes<br />
If required, the building floor can be assigned other attributes in a similar way to other components.<br />
The basis for the assignment of default attributes is the<br />
“Pset_BuildingStoreyCommon.”<br />
6.6 Usage groups in the <strong>IFC</strong> data model<br />
Usage groups can also be stored within the<br />
<strong>IFC</strong> data model. Based on an export schema<br />
generated in Autodesk Revit, these groupings<br />
can be passed on to those involved in the project<br />
for further use.<br />
The export of usage groups and zones is based<br />
on the parameter “ZoneName.” This is assigned<br />
as a shared parameter (type: text) of the Revit<br />
category “Rooms.” Only one instance parameter<br />
can be used for this category.<br />
Using this parameter, you can then generate a<br />
color scheme for rooms/zones and create the<br />
necessary categories:<br />
Schema definition using the<br />
parameter “ZoneName”<br />
In a floor plan, the corresponding categories of<br />
the color scheme can now be assigned to the<br />
generated rooms:<br />
Schema assignment for the room<br />
properties in Autodesk Revit<br />
INSTRUCTIONS FOR <strong>REVIT</strong> USERS