SpaceClaim 2011+

To create a cylindrical gusset:
1. Click the Gusset tool.
2. Click on the bend where you want to position the gusset.
3. Select the Cylindrical gusset type in the tool options panel.
4. Click to place the gusset.
You can now move a gusset from one position to another.
To move a gusset
5. Click Move in the Edit group on the Sheet Metal tab.
6. Select the gusset that you want to move.
7. Move the gusset along the bend axis to relocate the gusset to a new position.
You can now create a card guide form, such as for use when designing a sub-rack.
To create a card guide
www.spaceclaim.com
SpaceClaim 2011+ Release Notes
1. Click Forms in the Create group on the Sheet
Metal tab.
1. Select the Create Card Guide – Double Rectangle
form from the Special gallery group.
2. Click on a face to place the form.
� Before you place the form, you can edit the
form’s parameters in the Options panel.
� After you place the form, you can modify the form’s parameters from the Properties panel.
3. Double-click to complete the form, or, click the Complete tool guide.
The actual geometry used to create a new Thread Punch form now results in creating a realistic object. The object
now unfolds correctly. Previously, the bend radius value did not reflect the correct value of the selected object,
thus not creating an accurately drawn object. Because of this, the object did not unfold correctly.
Page 18