Rockford Systems EX-AL (Extruded Aluminum) Barrier & Perimeter Guarding Catalog
Catalog that features a wide-range of safeguarding devices and other safety-related products for updating hazardous machinery and processes. These devices are designed for point-of-operation safeguarding as well as for auxiliary guarding and large work-envelope safeguarding. Some of the products in this catalog include presence-sensing devices, area scanning devices, tower light assemblies, Detect-A-Finger® drop-probe devices, and pressure sensitive safety mats. These products can be used to safeguard fabricating machines, metal-cutting machines, material handling equipment, woodworking machines, and more. These safeguarding devices are designed to meet or exceed the OSHA regulations and ANSI standards.
Catalog that features a wide-range of safeguarding devices and other safety-related products for updating hazardous machinery and processes. These devices are designed for point-of-operation safeguarding as well as for auxiliary guarding and large work-envelope safeguarding. Some of the products in this catalog include presence-sensing devices, area scanning devices, tower light assemblies, Detect-A-Finger® drop-probe devices, and pressure sensitive safety mats. These products can be used to safeguard fabricating machines, metal-cutting machines, material handling equipment, woodworking machines, and more. These safeguarding devices are designed to meet or exceed the OSHA regulations and ANSI standards.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
BARRIER & GUARDING SYSTEM<br />
FRONT MOUNT XL-1 THROUGH XL-7<br />
Extended Mount<br />
Assembly<br />
Roof Section<br />
Front Mount<br />
Adjustable Lower Section<br />
of Panel<br />
Front Frame Mount<br />
Nonadjustable Panel<br />
With Hinged and Latched<br />
Polycarbonate Door<br />
Floor Section<br />
Example of a Seven-Panel Guard (XL-7) on a Gap-Type Machine<br />
The front-mount guarding system is applied to machines that usually<br />
have a gap-type construction with components that extend to the right<br />
or left of the point of operation. These components can be dies, tooling,<br />
feeds, scrap choppers, etc. The front-mount extrusion provides support<br />
for the guard across the front of the machine. The front portion of the<br />
machine can be safeguarded with one, two, or three panels (see the<br />
measurement form on page 17 for the LF, F, and RF panels).<br />
If panels need to be removed or hinged, please indicate how they<br />
should be attached. When measuring for a front-mount guard and the<br />
construction of the panel is determined, a roof and/or floor section is<br />
required if someone can reach over or under the guard.<br />
The panel length will be determined at the factory based on the<br />
information provided on the measurement form.<br />
<strong>EX</strong>-<strong>AL</strong> BARRIER & PERIMETER GUARDING | 17
Change language