IBM Power 570 and IBM Power 595 (POWER6 ... - IBM Redbooks

The POWER6 595 is machine type-model (MTM) 9119-FHA. This machine type represents a
change from the machine type and model numbers used historically for System i (iSeries)
model typically using 9406 570 and 9406 595. This change for System i clients facilitates the
simpler, more granular and transparent feature structure for the unified product, with single
set of pricing and terms for hardware supporting all operating systems. This product
introduction represents merely a model change to FHA for the System p5® 590/595, which
was already machine type 9119 (as in 9119-590 and 9119-595 which upgrade into a
9119-FHA).
3.1.1 Hardware requirements
The following minimums are always required:
► One IBM Power 9119-FHA Server (9119-FHA)
► One 8-Core, POWER6 Processor Book 0-Core Active (#4694)
► Three 1-Core, Processor Activations, 37.5% active (3 x #4754)
► Four identical memory features (0/4 GB or larger)
► Sixteen 1 GB memory activations (16 x #5680)
► One Power Cable Group, First Processor Book (#6961)
► Four Bulk Power Regulators (#6333)
► Two Power Distribution Assemblies (#6334)
► Two Line Cords, selected depending on country and voltage
► One Pair of doors (front/back), either slimline or acoustic
► One Universal Lift Tool/Shelf/Stool and Adapter (#3759 and #3761)
► One Language Specify (#93xx - country dependent)
► One HMC (7042-COx/CRx) attached using Ethernet cables
► One I/O Loop Adapter, either 12X I/O Loop Adapter (#1816) or RIO-2 I/O Loop Adapter
(#1814), depending on I/O drawer selection
► One I/O drawer providing PCI slots attached to the I/O loop
– For a new server shipment, this will be the 12X I/O Drawer (#5797 or #5798) located at
A05 in the CEC frame when the #5798 is available (November 2008)
Two Enhanced 12X I/O Bus Cables, 2.5 m (#1831)
One Enhanced 12X I/O Cable, 0.6 m (#1829)
– Prior to the availability of #5798 support (November 2008), new 91190-FHA system
configurations that ship will use a RIO-2 attached I/O drawer based upon the primary
operating system specified on the order.
If an AIX or Linux operating system is specified as the primary operating system, the following
minimum items are required:
► One Primary Operating System Indicator for AIX (#2146) or for Linux (#2147)
► One PCI-X 2.0 SAS Adapter (#5900) or PCI LAN Adapter for attachment of a device to
read CD media or attachment to a NIM server
► Two 15,000 rpm, 146.8 GB, SCSI Disk Drives (#3279), or larger
Chapter 3. IBM Power 595 model 9119-FHA 103