KaVo Dental Colours - Medipro

KaVo ORTHOcenter 1058 O
Description
Dentist's element on assistant's side
Dental chair and treatment unit in one compact structure, central
control, versions for left-handed or right-handed user can be determined
at the factory.
Large service table with instrument tray for hand instruments, easily
moving pivot and spring arm with large swivelling range, heightadjustable,
with brake and integrated gas spring.
Integrated service table: cup support, forceps holder, additional holder
Including supply and equipment with a 3-function syringe tubing
and 1 x tubing with 4-hole standard connection for air-driven instruments
for MULTIflex coupling 465 RN, 465 LRN, 459, 459 AN
Suction tubing set with HV suction tubing, saliva ejector tubing and
suction nozzle set
Switching relay for automatically switching the unit-mounted operating
light on/off in positions 1 and 2
or
connection of the KaVo ERGOcom system
or
call key/bell function
Smooth, wipeable instrument tubings, with screw coupling on unit
- easy mounting
Electrical instrument support switch with priority logic circuit
Control in the form of a joystick for 3 levels. Level 1 - tumbler filling,
bowl flush, suction stop. Level 2 - manual chair functions: up/down,
backrest up/down. Level 3 - automatic chair programs: rinse position,
2 positions freely programmable, status display for fibre-optic
light, spray water/spray air, motor direction
Exhaust air filter for instrument return air
Table handle, fixed
Safety cut-off in foot control bow
Height-adjustable arm for dentist's element on assistant's side
Spittoon on unit body, with pivotable mouth rinse bowl support and
safety cut-off device in bowl support
Electrical control for tumbler and bowl rinse function
Spittoon bowl, pivotable towards patient. Bowl can be removed and
thermally disinfected
Compact filter housing, with connection for suction tubes and easily
changeable suction filter
Multifunction control, pneumatic, with instrument on/off function,
continuous speed and intensity regulation. Spray on/off function,
chipblower on function, K/KL motor switching to counterclockwise
motor operation and dental chair function with instruments in their
holders or picked up (preselection via foot control bow), freezeframe
with connected camera and monitor
Central supply element, integrated in unit body, for flush and surface
mounting.
KaVo drinking water component and disinfection system, see Optional
Extras
Compressed air filter with automatic condensate separation
Central electronic overload-proof power supply for unit and chair
control
Mains voltage conversion for 100/110/120/220/240 V - 50 Hz/60
Hz
Diagnosis connection for separate tester for service engineer
���������������������������������������
������������������������ ��
Dental chair
Height adjustment by spindle motor drive, min. 395 mm - max. 780
mm adjustment
Backrest/seat inclination with spindle motor drive, 1° - 70° adjustment
range
Chair seat can be manually raised for flat treatment position, e.g. for
the treatment of children
Offset joint for avoiding the "stretching effect"
4 programmable AP positions
LP position and SP position
Safety cut-off in seat, backrest
Soft, elastic upholstery set, changeable, colours according to KaVo
colour chart
Backrest in "Progress" version, with reduced width in shoulder support
region for optimal ergonomics
2-joint headrest, extendable, with mechanical inclination adjustment,
ergonomically operable rotary knob reversable for treating of
wheelchair patients.
Arm rest on left and right, can be swivelled up for entry and exit
Optional Extras
Panoramic X-ray viewer 1440 integrated on service table
Instrument bank
Screw-cap glass tubes with holder
Waste container
Kit for sprayheating for instruments
Kit without spittoon element
Additional tray support on assistant's side, can be mounted for 1
standard tray, instrument tray small, stainless
or
Kit for DIAGNOdent holder
Polymerization light can be connected to assistant's element
Selective support kit
Kit for suction tubing guidance roller
Hot water boiler 24 V for tumbler filler
Connection to various extraction systems (one system must be present).
Place selection valve is included in the kit - except for solids
collector kit
Water inlet unit with integrated water disinfection system, with electronic
monitoring of the disinfection tank/acoustic signal for refilling
with free outflow, DVGW or DIN 1988/4 tested - DVGW test symbol
Alternatively, compact water block without DVGW, with water filter
and shut-off valve
Possibility for mounting upright post for operating light on the unit
body
Magnifying mirror, pivotable, for mounting on KaVo operating light
Patient service box with support for patient utensils, disposable tissue
dispenser, waste container
Steel mounting plate for mounting on left or right (for situations
where the unit cannot be installed directly on the floor, e.g. exhibitions)
Kit for connecting of external devices with connections for water, air
and electricity
Patient chair COMPACTchair with bendable foot bench instead of patient
chair Standard. Backrest/seat inclination with spindle motor
drive, 1°- 85° adjustment range.
*DVGW = Deutsche Vereinigung des Gas- und Wasserfaches e.V.