KaVo Dental Colours - Medipro

KaVo System 1056 S/T
Description
Dentist's element
Dental chair and treatment unit in one common compact design,
central control
1056 T/S: Instrument carrier with easily moving spring or pivot arm
with wide swivelling range, adjustable in height, with 5 instrument
holders, locking brake and integrated pneumatic spring
Supplied and equipped with one 3-function syringe tubing and one
tubing with 4-hole standard connection for air-driven instruments
(air version only) or for electric-driven instruments (electric version
only) for connection of MULTIflex coupling 465 RN, 465 LRN, 459,
459 AN. Tray support for one US-Tray.
Can be equipped with 2-4 tubings for air-driven instruments or
INTRA LUX motor K 200 or INTRA LUX motor KL 701 (electric version
only) or PIEZOlux scaler (electric version only)
Tray holder for 1 US tray
Smooth, whipable instrument tubings with screw coupling to unit –
easy mounting
Pneumatic instrument holder switches with priority circuitry
Membrane control element on instrument table for instrument and
spittoon: spray sensor switch, sensor switch for tumbler filler, sensor
switch for bowl flush. Only for electric version: additional K/KL
motor forward/reverse sensor switch with indicator, direct preselection
of the motor speed in percentage (1 %, 25 %, 50 %, 75 % and
100 %).
Table handle on left and right, fixed, for dentist (1056 S only)
Foot control , pneumatic, with instrument on/off function, speed and
intensity regulation. Dental chair function with instruments in their
holder or picked up.
Assistant’s element
Assistant’s element, pivotable, with holder for 3-function handpiece,
polymerization light Satelec Mini LED, 1 saliva ejector tubing, 1 HV
suction tubing incl. electric holder switch
Spittoon on unit body, with pivotable spittoon bowl and safety cutoff
in the carrier
Porcelain bowl, pivotable toward the patient, removeable, thermodesinfectable
Compact filter housing, with connection for suction tubings and easily
changeable suction filter
Suction tubing set with HV suction tubing and saliva ejector
tubing
���������������������������������������
������������������������ �
Dental chair
Height adjustment by spindle motor, min. 395 mm – max. 780 mm
stroke
Backrest/seat tilt by spindle motor drive, 1° - 70° adjustment range
Offset articulation point for avoiding the “stretching effect”
4 programmable AP positions, manuell chair functions
LP and SP position
Safety cut-off in the seat and backrest
Upholstery set in soft, elastic design, changeable. 3 colours available
according to colour chart
Backrest in “Progress” design, with reduced width in shoulder support
region for optimal ergonomic procedure
Double-joint headrest, extendable, with mechanical tilt adjustment,
ergonomic rotary control knob
Armrest on left and right, can be swivelled up to ease entry and exit
Optional extras dentist’s element
PIEZOlux kit
Kit for spray heating of instruments
X-ray viewer for image size 5 x 5 cm
Kit for additional tray support (1056 S only)
Connection to various suction systems
(one system must be present).
Optional extras assitants’s element
Additional tray support for 2 norm trays on assistant’s side
Assistant’s 3-function syringe handpiece
Polymerization light Satelec MiniLED
Warm water boiler 24 V for tumbler filler
Miscellaneous
Water bottle
Possibility for mounting an upright post for operating light on the
unit body
Steel mounting plate (for situations where the unit cannot be installed
directly onto the floor, i.e. exhibitions)