Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
B LEATHER CRACK FILLER<br />
FROM SYSTEM B1<br />
B Leather crack filler is a water based acrylic paste that fills out<br />
scratches in leather or any part of that grain that is missing.<br />
» Flexible filler, fast drying, easy to sand.<br />
» Can be over coated with water based<br />
» or solvent based leather coatings.<br />
» Resistant to common used leather cleaner and protection<br />
Drying time<br />
Dust-dry after approx.<br />
Set to touch after approx.<br />
Sandable after approx.<br />
4 hours<br />
30 minutes<br />
15 minutes<br />
4 hours<br />
14 Leather Crack filler 60ml.<br />
Handling and application. The Leather crack filler paste contains<br />
approximately 30% water, which means that when the product<br />
is dry, the volume of the product will have diminished by 30%.<br />
Consequently, deep scratches will probably have to be refilled<br />
once more. The adhesion of a filler is depending on the thickness<br />
of the product. The thinner, the better the adhesion. The thicker<br />
the worse the adhesion. You can sand B leather crack filler with<br />
fine sanding paper (P320-P400) before adding the final color to<br />
the filled scratch.<br />
Vinyl repair glue<br />
B Compound is a water based flexible acrylic leather<br />
filler for holes in leather and vinyl. Must be over<br />
coated with water based or solvent based leather<br />
coating. Resistant to common used leather cleaner<br />
and protection.<br />
Curing time. Dust-dry after approx. 1 minute by<br />
heating at 140 degrees. Set to touch when cooled<br />
down.<br />
Handling and Application. Clean the area with plast cleaner<br />
part no. 39. Fill the damaged area with B Compound using<br />
the palette knife part no. 13. Apply a mouldmaker copy on top<br />
of the wet glue. Use the heat sealing iron on the mould <strong>from</strong><br />
Mouldmaker part no. 21 and heat the product until it is melting.<br />
Cool down with cooling bag part no. 7 and carefully remove<br />
the mould.<br />
18 B Compound 60ml<br />
26 - 27