CEAC-2020-10-October

New Products
Watts Introduces iDROSET Static
Balancing Valves
Watts is pleased to introduce the iDROSET CSD Series of
static balancing valves for hydronic heating and cooling
systems. Designed to maximize efficiency, enhance comfort,
and reduce noise caused by excess uid speed, the user-friendly
iDROSET uses patented flow measurement technology to
provide precise calibration and full-time read-out on an easyto-read
gauge.
For more information about iDROSET, visit the product page
at Watts.com.
iDROSET balancing valves offer contractors unprecedented
speed and ease in balancing a hydronic system, allowing you
to set and read the flow without any additional tools. To set
and read the flow rate, simply adjust the hand wheel to the
desired value and read the flow rate on the dial in real time.
The iDROSET CSD’s ball-type design provides up to a 25:1
turn-down ratio, positive shut- off and hand wheel locking
screw to secure adjustment, and is available with F-NPT connections
from 1⁄2" up to 2" with flow rate capability up to 44
GPM.
Features
• Using patented flow measuring technology, iDROSET is the
only static balancing valve that lets you set and read flow
without any additional tools.
• The valve features a large, easy-to-read gauge that continuously
indicates flow without the need to actuate a bypass
circuit.
• A simple twist of the ergonomic hand wheel sets flow and
can be locked when the desired flow rate is set.
• Patented flow measurement technology.
• Max. operating pressure: 230psi.
• Operating temperature: 14 to 230°F.
• Threaded connections: F-NPT.
• Each valve factory-tested to +/- 10% accuracy.
• Available in 1/2”, 3/4”, 1” sizes.
Watts’ user-friendly iDROSET CSD series uses patented flow measurement
technology to provide accurate, full-time read-out on an easy-to-read
gauge.
Volume 85 · Number 10 | 59