settlement_of_shallow_foundations_on_granular_soils (Lutenegger ang DeGroot)

6.0 Allowable Bearing Capacity Charts ......................................... 136
6.1 Terzaghi and Peck (1948, 1967) .......................................... 136
6.2 Taylor (1948) ......................................................... 139
6.3 Peck, Hanson and Thornbum (1953, 1974) .................................. 139
6.4 Meyerhof(l956, 1965) ................................................. 142
6.5 Teng (1962) .......................................................... 146
6.6 Sowers (1962) ........................................................ 148
6.7 Bowles (1968, 1977, 1982, 1988) ............ : . ........................... 148
6.8 Mohan, Aggarwal and Tolia (1971) ........................................ 148
6.9 Canadian Foundation Engineering Manual (1975, 1985, 1992) .................. 154
6.10 McCarthy (1977) ..................................................... 155
6.11 Parry (1977) ......................................................... 163
6.12 Spangler and Handy (1982) ............................................. 164
6.13 Goel (1982) ......................................................... 164
6.14 Navfac DM7 (1982) ................................................... 164
6.15 Hunt (1986) ......................................................... 164
6.16 van der Vlugt and Rosenthal (1989) ...................................... 171
6.17 Comparison of Design Charts ........................................... 171
7.0 Load-Settlement Behavior of Spread Footings on Granular Soils- Universal
Approach .............................................................. 174
7.1 Background .......................................................... 174
7.2 Load-Settlement Response of Footing on Sand ............................... 181
7.3 Review of Load Tests .................................................. 190
8.0 Settlements from Seismic Loading .......................................... 202
9.0 Recommendations ....................................................... 204
10.0 References ............................................................. 207
Appendix A: Standard Penetration Test (SPT) .................................. 223
Appendix B: Cone Penetration Test (CPT) ...................................... 232
Appendix C: Pressuremeter Test (PMT) ........................................ 247
Appendix D: Dilatometer Test (DMT) .......................................... 260
Appendix E: Drive Cone Test (DCT) ................. , ......................... 267
Appendix F: Plate Load Test (PLT) ............................................ 268
VI