PARCsafe_catalogue

Product catalogue 

ABOUT US 

Edition 1 — 2020 

1

OUR VISION 

To be the trusted business partner 

in providing solutions that 

improve access and the value of 

commerical real estate assets, 

parking and mobility hubs. 

Vehicle 

servicing 

Vehicle cleaning 

and washing 

Last Mile Mobility 

parking and 

charging 

— scooters & bikes 

Storage area

MOBILITY HUBS 

THE FUTURE OF PARKING 

Solar roof top 

power generator 

Electrical vehicle 

charging station 

Staging and 

holding area 

Launching and landing 

drones, air service 

3

WELCOME TO PARCSAFE 

Your parking resources are an asset to your business. 

Both as a profit centre and as a customer convenience, your 

parking deserves specialist attention. 

At a minimum, parking users expect cleanliness, ease-of-use, 

and a feeling of security and safety when they’re choosing 

where to spend their money. 

Parcsafe can help you deliver not only these ‘parking 

fundamentals’, but also advise you on the smart technologies 

that will help you turn your parking area into a revenue centre 

for your business. 

From planning for new forms of mobility and access 

requirements in a busy urban centre, through to providing clear, 

concise reporting through cutting edge management software, 

our experienced team can assist you with the entire process. 

Parcsafe will help your business create and maintain the 

customised parking solutions that your customers expect. 

ANALYSIS 

Parcsafe’s expert parking consultants can analyse 

your building’s existing parking arrangements, 

and determine exactly what is and isn’t working. 

We’ll bring our experience to bear to gain a deep 

understanding of what you want to achieve – and 

the possibilities that you may not have imagined. 

Looking at the challenges and opportunities within 

the space you have, we’ll consider the profiles 

of both your current parking users, and the ideal 

users you wish to attract. 

Parcsafe then use this information to design the 

ideal parking solution to maximise your business’s 

revenue from this asset. 

DESIGN 

When designing a parking solution, we take 

care to include all stakeholders throughout the 

process, working from the results of our detailed 

analysis phase. 

The completed design will naturally be designed 

to work within your budgetary requirements, and 

come complete with a clear cost estimate for 

implementing the solution. 

Of course, all Parcsafe designs are fully compliant 

with both Australian Standards and your local 

applicable building code regulations. The final 

design will integrate with the requirements of 

your traffic engineers or consultants to ensure a 

seamless delivery. 

Ultimately, Parcsafe’s parking designs help you 

move forward with confidence, knowing that every 

element has been considered and planned for. 

4 

www.parcsafe.com.au

SUPPLY 

We recognise that you need trouble-free 

operation and low ongoing costs for any parking 

solution you install. At Parcsafe we work hard to 

bring you this by partnering only with the most 

reputable international brands. 

The Parcsafe management team have established 

close working relationships with our suppliers and 

partners, both in Australia and internationally. 

This enables us to stay ahead of trends and 

industry developments, and implement strategies 

to maximise new technologies for your business. 

ABOUT US 

INSTALL 

The Parcsafe team will handle all on-site 

coordination of the install process. Parcsafe can 

also provide you with the complete carpark fitout, 

from wheel stops, bollards, speedbumps, bike 

racks, right through to your end of trip facilities. 

We can work with your chosen sub-contractors, 

or alternatively we can professionally handle all 

aspects of installation and commissioning. 

MAINTENANCE AND SUPPORT 

Lastly and crucially, Parcsafe will assist you with 

the important maintenance and support function 

for your parking systems. 

We understand your need to have complete 

reliability and accessibility for your chosen 

parking systems. That’s why we will work hard to 

keep your investment working for you. 

Parcsafe offers immediate technical response 24 

hours a day, 7 days a week. Our support spans 

all aspects of your parking systems, including 

technical, software, and mechanical. 

Our specialist services improve access and value in carparks and 

commercial real estate assets. 

PRODUCT CATALOGUE 

5

Our solutions 

PARC systems 

Parking guidance systems 

Vehicle access systems 

Pedestrian access systems 

Car park safety & security 

Complete carpark fitouts 

6 

www.parcsafe.com.au

Our offices 

Based in strategic locations across the nation, PARCsafe can deliver your 

projects with locally based teams. 

ABOUT US 

PERTH 

BRISBANE 

Head office: 

18 Success St. 

Acacia Ridge 

ADELAIDE 

SYDNEY 

MELBOURNE 

5 NATIONAL OFFICES 

Get in touch with one of our 

experts to learn about how we can 

help update your parking systems. 

Call us on 1300 987 645 


7

Index 

Welcome to Parcsafe 4 

PARC Systems 10 

Codex EN/EX 550 14 

Codex BI/BVN 550 16 

Codex CA 550 18 

Codex CA 555 20 

Codex/Ticketless CB 555/665 22 

Codex CM 550 24 

Codex LP 550 26 

Codex VA 550 28 

Couponing Printer 29 

eParkServices30 

ParkAccess32 

Vehicle Barrier 34 

Smart ANPR unit 36 

Parking Guidance system 42 

OpenSpace® guidance 44 

OpenSpace®46 

Sencir Parking Guidance 48 

One Way Traffic Signal System for Basement Carparks 56 

Vehicle access Systems 62 

VELOCITY64 

Vehicle Barrier 68 

Industrial Vehicle Barrier 70 

High Resistant Vehicle Barrier 72 

Vehicle Barrier with Reinforced Protection 74 

Bollard - Retractable 76 

Fixed Bollard Cube 78 

Fixed Bollard - Stylemaster 80 

Carpark Fitout and Design 85 

Wheel Stop 86 

Wheel Stop 87 

Bollards88 

Bollards89 

Bollards90 

Corner Guards 91 

Convex Mirror 92 

Speed Hump 93 

Speed Hump 94 

Carpark Safety and security 96 

4MP EXIR VF Bullet Network Camera 98 

Urban Clean 100 

Pedestrian Access Equipment 106 

SlimLane 940 108 

SPEEDGATE KINETIC 110 

SPEEDGATE MOTION 114 

STREAMLINE118 

TRIDENT- Supermarket 122 

PULSE126 

DYNAMIC128 

TITAN TURNSTILE 130 

8 

www.parcsafe.com.au

ABOUT US 

PARCsafe’s expert consultants consider the way everything works together to 

come up with a “turn-key” solution to suit your requirements. 


9

PARC SYSTEMS 

MULTIPLE LANE WITH TOUCHLESS TECHNOLOGY 

10 

www.parcsafe.com.au

PARC systems — Parking Access and Revenue Control 

CLEVER TECHNOLOGY TO CONTROL 

ACCESS AND COLLECT PARKING 

REVENUES 

Installing a Parking Access and Revenue Control (PARC) 

system in your carpark brings many potential advantages. 

Boom gates with 2D code and licence plate recognition 

work to significantly speed up entry and exit from your 

facility. Traffic congestion and emissions are reduced, and 

your customers enjoy a better overall experience. 

Importantly, the latest PARC systems are available in a 

touchless and contactless format, allowing your business 

to provide the safe and health-conscious car parking that 

today’s consumers demand. 

PARC SYSTEMS 

When you’re installing a PARC solution in your carpark, 

it’s critical to look for a system that will meet your 

business’s overall long-term goals and entire carpark 

design. 

PARCsafe’s expert consultants consider the way everything 

works together to come up with a “turn-key” solution 

to suit your requirements – from concept through to 

installation and beyond to service and maintenance. 

Orbility PARC systems 

PARCsafe have partnered with Orbility to deliver the latest 

in high-performance automated Parking Management 

Systems (PMS) to the Australian and New Zealand market. 

With over 50 years of experience, Orbility (previously 

trading as ACS, Xerox or Conduent Parking) have 

developed Codex 2D barcode ticket technology. 

The Codex system has had amazing success in several 

markets and is in use in over 2,000 parking locations 

globally. Chosen by major airports, parking operators, 

shopping centres and the like, a new Parking Access and 

Revenue Control system is added every three days. 

TOUCHLESS AND CONTACTLESS PARC 

SYSTEMS 

The coronavirus pandemic of 2020 has highlighted 

the need for consumers to minimise contact with high 

traffic touch points whenever they’re in public. The 

latest generation PARC systems address this need with 

contactless and touchless technology. 

Instead of drivers needing to touch a button on entry to 

request a ticket, the latest PARC systems use licence plate 

recognition technology to automatically offer a ticket. The 

same system allows a seamless exit by raising the boom 

gate when the driver has paid for parking. 

For payment, 2D printer thermal printer barcodes can 

be scanned without the need to physically insert a ticket. 

And Pay on Foot (POF) systems can be set to accept credit 

card payments via payWave only – avoiding exposure to 

cash and change. 

If your carpark is connected to a retail facility, 2D 

barcode technology gives you the option of offering 

touchless and contactless parking discounts. Retail 

employees won’t need to touch parking tickets – preprogrammed 

scanners can offer the discount contact-free. 

As touchless and contactless technology becomes more 

widespread, consumers will begin to actively seek out 

businesses that offer this safer and more health-conscious 

option for parking. 

Of course by the installation of LPR Cameras into a 

tickeltless system will eliminate the need for tickets 

altogether. However this option is not always the best 

solution for every application. Working with PACRSAFE 

will deliver the best solution for your site specific 

requirements. 

HOW A PARC SYSTEM OFFERS 

OPPORTUNITY FOR ADDITIONAL REVENUE 

STREAMS 

PARC systems can facilitate income for your business 

apart from simply parking revenues. For example, 

parking display screens can be used to sell advertising 

space to tenants or local businesses. 

Secondly, your PARC system can be incorporated into a 

future mobility hub, where different travel options such as 

micro mobility (scooters and electric bikes), biking, transit, 

and shared mobility come together. Storage and parcel 

collection points can offer further utility. 

The increased consumer usage of such a mobility hub 

provides obvious opportunities for further future revenue. 

Electric Vehicle (EV) charging points or even a carwash 

station can be incorporated into a correctly design PARC 

system without additional infrastructure, adding further 

potential revenue streams. 

The latest PARC systems can be designed with an eye 

to these future mobility enhancements, incorporating 

technology as it continues to develop. 

PRODUCT CATALOGUE 11

INTEGRATING A PARC SYSTEM WITH YOUR 

EXISTING PARKING INFRASTRUCTURE 

PARCsafe Parking Management Systems are designed to 

integrate smoothly with your site’s other carpark systems. 

Integration with third party systems is made possible by 

our comprehensive set of API and web services interfaces. 

To ensure straightforward integration, a PARCsafe 

consultant will conduct a site visit to assess the locations 

of boom gates, entry and exit terminals. 

If you currently have a parking guidance system already 

installed, we’ll also ensure it can be integrated with our 

PARC system recommendations – or depending on its 

capacity, advise you on what advantages it may give to 

upgrade the parking guidance system at the same time. 

Codex system features low power consumption which 

means it can use single phase power – there’s no need to 

install three phase power. This helps minimise the cost of 

installation. 

Because most of a PARC system is located outside the 

traffic area, installation is relatively straightforward. Only 

the installation of boom gates and entry & exit terminals 

will interfere with traffic flow for your customers – and 

PARCsafe can carry out installation in your business’s 

non-peak times or after hours to minimise disruption. 

Offline mode 

An important advantage of our PMS solution is that 

the equipment operates even if the communications 

link to the Multipark Central Management System fails. 

The machines can store transactions and alerts and 

automatically transmit them when the network is restored. 

Storage capacity is up to 16,000 transactions. 

HOW THE CODEX PMS INTEGRATES WITH 

OTHER CARPARK SYSTEMS 

Integration with parking guidance system (PGS) 

• Codex integrates smoothly with parking guidance 

systems and can display the car parking space on the 

screen of the Pay on Foot station (POF). 

• Provides financial data to external ERP systems. 

• Interfaces with online reservation systems for car park 

space booking. 

• Interfaces with airport e-commerce applications by 

reading the barcode printed on purchase receipts by 

Pay on Foot stations. This allows you to offer discounts 

on parking to your shopping customers. 

MAINTENANCE AND SUPPORT FOR PARC 

SYSTEMS 

PARCsafe’s systems offer comprehensive software 

and hardware support. Our partner manufacturer 

Orbility provides 24/7 software support, and hardware 

maintenance support is available Australia-wide from 

local PARCsafe technicians. 

Ongoing PARC system maintenance costs can be 

minimised by installing quality systems and components. 

With minimal ongoing maintenance required, yearly 

maintenance charges are kept low. 

How the Codex Parking Management System works 

Thanks to its advanced technology, the Codex range is 

simple, efficient and truly competitive. Ticket acceptors 

and readers have been replaced by scanners, making 

this range more reliable, easier to maintain, and with 

lower operational costs. 

The Codex 2D barcode technology-based PMS is distinct 

from existing solutions: 

• Ticket readers are not motorized, which helps to 

increase the flow of traffic at entry and exit terminals, 

and reduce maintenance costs due to less moving 

parts. 

• It offers an off-line mode equivalent to the one for a 

magnetic solution. 

Designed and manufactured in France, the Codex PMS 

system is backed up by technical support teams in France, 

Spain, UK, and the USA, along with local support crews 

across Australia. 

The Codex range is available in a completely touchless 

format to meet today’s changing requirements and 

tomorrow’s needs – while still being open to new 

technologies. 

12 

www.parcsafe.com.au

Codex system features low power consumption which means it 

can use single phase power. 

PARC SYSTEMS 


Product Data Sheet 

CODEX EN/EX 550 

Entry / Exit Terminal 

Orbility® Multipark 

The Orbility® Multipark Codex EN/EX 550 

terminal delivers and reads 2D barcode 

parking tickets. 

This equipment is part of the Orbility® Multipark 

system. 

FEATURES 

• 2D barcode ticket printing for hourly users. Ticket is 

automatically retracted if the customer backs out of 

the access lane without taking the ticket. 

• 2D barcode ticket reader will read and check the 

validity of pass-cards, conference/event tickets and 

prepaid cards. 

• Non-motorised and ergonomic reading area. 

Allows tickets to be read quickly and decreases 

maintenance. 

• Operates in standalone mode in the event of loss of 

communication with the server: the E-Ticket platform 

manages printed tickets and broadcasts them to all 

equipment. 

• Colour LCD screen displaying straightforward user 

instructions. 

• Capacitive-button intercom connecting to car park 

office or remote help desk. 

• Checks dates, time bands, blacklist cards. 

• All transactions and alerts are transmitted in real time 

to the Orbility® Multipark server. 

• Management and control of associated barrier in 

entry or exit lane. 

• Receives signal from induction loops when vehicle is 

present. 

• Stolen ticket facility (entry terminal). 

• Anti-pass back (for pass card users). 

14 

www.parcsafe.com.au

TECHNICAL SPECIFICATIONS 

OVERALL DIMENSIONS 

WEIGHT 

POWER SUPPLY 

(height x width x depth): 1,228 x 385 x 472 mm. 

70 kg. 

240 V - 50Hz – 500 VA (including 400 VA heater). 

OPERATING 

TEMPERATURE RANGE 

HOUSING 

-20°C to +50°C. 

1.5 mm steel housing (anti-corrosion treated) with durable epoxy powder coat finish 

(standard colour RAL 9006 light grey). 

PARC SYSTEMS 

COLOUR 

ACCESS 

IP54. 

Front fascia in white Plexiglas(RAL 9016), other colours available upon request. 

Easy Access to internal components through front door equipped with a security lock. 

All components easily accessible. 

INTERNAL COMPONENTS 

• 2D barcode printer for the printing of parking 

tickets. 

• 2D barcode scanner for the reading of all types of 

parking tickets. 

• Industrial PC board. PC based platform provides 

simplified maintenance and allows easy system 

upgrades. 

• Ethernet connection to Orbility® Multipark System. 

• 4,000 ticket magazine for tickets issue in roll form 

(entry terminal and exit terminals with credit card 

payment). 

• Thermostatically controlled heater with fan. 

• Power supply with isolation switch. 

This system can be adapted to 

be completely touchless and 

contactless. 

OPTIONS 

• Payment by credit card (EMV credit card module). 

• Mifare® contact less reader for subscribers or top 

up cards. 

• Long range reader. 

• Motorway high speed pass. 

• Fan-forced ventilation. 

• Intercom system. 

• UPS for protection against power failure. 

• ANPR enabled access control. 

• Text to voice facility to give user instructions upon 

entry or exit. 

• Integrated bidirectional video over IP. 

• Operating temperature range: -40°C to +50°C 



CODEX BI/BVN 550 

Simplified Terminal 


Easy to use terminal with reduced maintenance, 

it controls the entry of vehicles to the car parks 

that are closed to hourly parkers during the 

night time. It can also be used to control access 

to reserved areas. 


system. 

FEATURES 

• Reads and controls the validity of pass-cards, prepaid 

cards congress and event tickets (if barcode reader 

installed): time/place, black list. 

• Transmission in real time to the Orbility® Multipark 

Central Management System of alarms. 


communication with the server. The E-Ticket platform 


equipment. 

• Activates the door closing access to the car park or 

the barrier providing access to the nested area. 

• Button for intercom. 

Access to internal components through a metallic door, 

equipped with a lock. 

16 

www.parcsafe.com.au



WEIGHT 

POWER SUPPLY 

(height x width x depth): 1220 x 310 x 293 mm. 

40 kg. 

240V - 50Hz – 250 VA (excluding heater). 

OPERATING 


-20°C to +50°C. 

PARC SYSTEMS 


• 1.5 mm anti-corrosion treated steel housing, with 

durable epoxy powder coat finish (colour RAL 9006 

light grey). 

• Access to internal components through a metallic 

door, equipped with a lock. 

• PC board with Windows operating system. 

• Mounted on a podium for stand alone installations. 

OPTIONS 

• 2D barcode reader for the reading of tickets. 

• Mifare® contactless card reader for subscribers. 

• Long range reader. 

• Barrier control. 

• Intercom module. 

• Video enclosure with 5’7 screen and IP camera. 

• Intregration with LPR system. 

• Can be colour coded to suit client request or with 

graphic wrap around. 

This CODEX BI/BVN is also utilised for LPR ticketless 

systems. 



CODEX CA 550 

Pay-on-Foot Station 


The Orbility® Multipark Codex CA 550 Payon-Foot 

is designed for the payment of 2D 

barcode tickets and all types of charges. 


system. This system can be adapted to be completely 

touchless and contactless. 

DDA compatible 

All commends are located between 0,90 and 1,30m 

1. Ticket payment 

2. Scrolling text configurable by the customer 

• Text to be displayed 

• Scrolling speed 

• Can be dowloaded into one or several POF 

• Central editor, user friendly interfance 

3. Info/promotions/service sale window 

• Text dispay, videos, animations, image, etc. 

• Can be connected TO web server(traffic info, 

weather forecast, city info) 

• Touch buttons for sale of additional services 

FEATURES 

• Modern E-Ticket design, Parking highly specified and 

extremely reliable. 

• Payment for hourly parking 2D barcode tickets. 

• Backlit graphic 19” colour LCD screen with user 

instructions. 

• Operating temperature range: -10°C / + 40°C. 

• 8 capacitive button function choices such as 

language selection (5 languages available), lost ticket 

and receipt request. 




equipment. 

• Capacitive button intercom. 

• Coin insertion slot. Bank note insertion slot (option). 

• Change (depending on option) given in coins and 

banknotes. 

• Receipt for payment issued automatically or on 

request. 

• Configurable payment of transit time and entry to exit 

grace period. 

• Payment for conference, event tickets and prepaid 

cards which can be used at entry and exit for a 

predetermined period. 

• Payment of pass-card subscriptions and renewals for 

use in authorised parking areas. 

• Payment for prepaid top-up cards. 

• Real time transmission of alerts and transactions. 

• EMV chip and pin payment. 

• Payment for lost tickets. 

18 

www.parcsafe.com.au



WEIGHT 

Including illuminated sign (height x width x depth): 

– 1,888 x 900 x 500 mm 

– 1,666 x 900 x 500 mm (DDA version) 

300 kg approximately 

POWER SUPPLY 

OPERATING 


HOUSING 

240 V - 50Hz – 1000 VA (including 400 VA heater) 

-10°C to +40°C. 

2 mm steel housing (anticorrosion treated), with durable epoxy powder coat finish 

(standard colour RAL 9006 light grey, other colours available upon request). 

PARC SYSTEMS 

ACCESS 

ILLUMINATION 

CABINET FINISH 

IP53 

Easy access to internal components via a single front door, in anticorrosion treated 

steel housing; Door finish in durable white (RAL 9016), equiped with a high security 6 

point lock. 

Illuminated top sign 

• 304 grade brushed stainless steel 

• 316 grade brushed stainless steel* 

* Suitable for corrosive environments 


• 2D barcode scanner for the reading of tickets. 

• Barcode printer for the printing of receipts and flat flee tickets. 

• Installed PC processor - PC based platform provides simplified 

maintenance and allows easy system upgrades. 

• Coin handling system: acceptance of up to 16 types of coins, recycling 

in 4 hoppers (capacity of each hopper: 300 to 400 coins). 

• Coin vault: capacity of approximately 4,000 coins. 

• Thermostatically-controlled heater with fan. 

This system can 

be adapted to be 

completely touchless 

and contactless. 

OPTIONS 

• Wave and Pay payment by NFC cell phone or contactless credit card. 

• Mifare® contactless reader for the renewal of subcriptions. 

• Payment with mobile phone (via third party Payment Company). 

• Bank-note reader/recycler (recycling capacity of up to 4 types of 

banknotes). 

• Colour options on housing according to RAL standard panel. 

• Installation of 1 to 2 additional hoppers that can be manually loaded in 

bulk - each hopper capacity is 300 - 400 coins depending on the coin 

type. 


• Installation of extra large capacity hopper (3400 coins). 



CODEX CA 555 

Pay-on-Foot Station-Touch Screen 


The Orbility® Multipark Codex CA 555 Payon-Foot 

is designed for the payment of 2D 

barcode tickets and all types of charges. 


system. This system can be adapted to be completely 

touchless and contactless. 

DDA compatible 

All commends are located between 0,90 and 1,30m 

1. Ticket payment 

2. Scrolling text configurable by the customer 

• Text to be displayed 

• Scrolling speed 

• Can be dowloaded into one or several POF 

• Central editor, user friendly interfance 

3. Info/promotions/service sale window 

• Text dispay, videos, animations, image, etc. 

• Can be connected TO web server(traffic info, 

weather forecast, city info) 

• Touch buttons for sale of additional services 

FEATURES 

• Modern E-Ticket design, Parking highly specified and 

extremely reliable. 

• Payment for hourly parking 2D barcode tickets. 

• 19 inch colour touch screen with user instructions. 

• Operating temperature range: -10°C / + 40°C. 




equipment. 

• Capacitive button intercom. 

• Coin insertion slot. Bank note insertion slot (option). 

• Change (depending on option) given in coins and 

banknotes. 

• Receipt for payment issued automatically or on 

request. 

• Configurable payment of transit time and entry to exit 

grace period. 


cards which can be used at entry and exit for a 

predetermined period. 


use in authorised parking areas. 

• Payment for prepaid top-up cards. 

• Real time transmission of alerts and transactions. 

• EMV chip and pin payment. 

• Payment for lost tickets. 

20 

www.parcsafe.com.au



Including illuminated sign (height x width x depth): 

– 1,888 x 900 x 500 mm. 

– 1,666 x 900 x 500 mm (DDA version). 

WEIGHT 

POWER SUPPLY 

OPERATING 


300 kg approximately 

240 V - 50Hz – 1000 VA (including 400 VA heater) 

-10°C to +40°C. 

PARC SYSTEMS 

HOUSING 

ACCESS 

ILLUMINATION 


(standard colour RAL 9006 light grey, other colours available upon request). 

IP53 

Easy access to internal components via a single front door, in anticorrosion treated 

steel housing; Door finish in durable white (RAL 9016), equiped with a high security 6 

point lock. 

Illuminated top sign 


• 2D barcode scanner for the reading of tickets. 

• Barcode printer for the printing of receipts and flat flee tickets. 

• Installed PC processor - PC based platform provides simplified 

maintenance and allows easy system upgrades. 

• Coin handling system: acceptance of up to 16 types of coins, recycling 

in 4 hoppers (capacity of each hopper: 300 to 400 coins). 

• Coin vault: capacity of approximately 4,000 coins. 

• Thermostatically-controlled heater with fan. 

This system can 

be adapted to be 

completely touchless 

and contactless. 

OPTIONS 

• Wave and Pay payment by NFC cell phone or contactless credit card. 

• Mifare® contactless reader for the renewal of subcriptions. 

• Payment with mobile phone (via third party Payment Company). 

• Bank-note reader/recycler (recycling capacity of up to 4 types of 

banknotes). 

• Colour options on housing according to RAL standard panel. 

• Installation of 1 to 2 additional hoppers that can be manually loaded in 

bulk - each hopper capacity is 300 - 400 coins depending on the coin 

type. 


• Installation of extra large capacity hopper (3400 coins). 



CODEX/TICKETLESS 

CB 555/665 

Cashless Pay-On-Foot Station- Credit 

Card Only 


The simplified Codex and Ticketless 

CB555/665 cashless Pay-On-Foot station is 

designed for the payment of 2D barcode and 

virtualised parking tickets. 


system. 

Description: 

• 21,5 inch touch screen, 

• Modern and evolutive design with a glass front 

panel, 

• Wall or pedestal installation. 

FEATURES 

• Payment for hourly parking 2D barcode or 

dematerialised tickets, 

• Payment by credit cards, including contactless cards 

or NFC smartphones, 

• Automatic or on request emission of payments 

receipts, 


cards which can be used at entry and exit for a predetermined 

period, 

• Payment for lost tickets, 


use in authorised parking areas, 

• Intercom accessible via a button on the touch screen. 

22 

www.parcsafe.com.au



POWER SUPPLY 

(height x width x depth): 875 x 510 x 271,15 mm 

240 V - 50Hz – 700W (including 400W for the heater) 

OPERATING 


HOUSING 

ACCESS 

-10°C to +40°C. 


(standard colour RAL 9016 white, other colours available upon request) 

Easy access to internal components via a single front door, in white glass (RAL 9016), 

with 2 security point lock. 

PARC SYSTEMS 


• 2D barcode scanner for the reading of parking 

tickets and parking vouchers, 

• Barcode printer for the printing of receipts and flat 

fee tickets, 

• Installed PC processor – PC based platform 

provides simplified maintenance and allows easy 

system upgrades. 

OPTIONS 

• ISO 14443 A/B – Mifare® contactless reader for 

the renewal of subscriptions, 

• Colour options on housing according to standard 

RAL panel, 

• Integrated bidirectional video over IP, 

• Intercom board, 


This system can be adapted to 

be completely touchless and 

contactless. 



CODEX CM 550 

Cashier-Terminal 


The Orbility® Multipark Codex CM 550 

Cashier Terminal is used for payment on 

foot or from vehicle at exit. It can process all 

types of transactions and accept all means of 

payment. It also allows printing of all types of 

2D barcode tickets and cards. 


system. 

FEATURES 

Manages all types of transactions: 

• Hourly parking: payment for regular or lost ticket. 

• Pass-cards: payment for subscriptions and renewals, 

parking overstay payment. 

• Conference and event tickets: sale, parking overstay 

payment. 

• Sale of vouchers and Prepaid cards (in time or 

money, usable at entry/exit or as means of payment). 

• Various payment methods: cash, cheque, prepaid 

cards, vouchers, credit and debit cards. 

• Used for payment on foot or from vehicle at exit at 

manned kiosk. 

• Allows encoding of all types of tickets or cards: hourly 

tickets, pass cards, conference and event tickets, 

vouchers, prepaid cards. 

• Cashier management using secure access codes 

and independent work sessions (shifts) enables 

transactions carried out by each cashier operator to 

be tracked for audit purposes. 

• Automatic or manual receipt printing. 

• Automatic or manual end of shift status report print 

out. 

• Record of transactions through Orbility® Multipark 

Central Management System. 

To work in conjunction with other equipment from Orbility 

Multipark system. 

24 

www.parcsafe.com.au


POWER SUPPLY 

OPERATING TEMPERATURE RANGE 

240 V - 50Hz – 500 VA. 

+15 °C to +35 °C. 

TECHNICAL AND HARDWARE 

DESCRIPTION 

The Cashier Terminal includes the following features: 

• A 2D barcode reader for the printing of receipts 

and all types of congress and events tickets. 

• A barcode reader. 

• A Cash drawer. 

• Customer fee and date/time display. 

• Standard desktop PC, with flat screen monitor 

(when the Cashier terminal is integrated with the 

database server only one PC is required). 

OPTIONS 

• ISO 14443 A/B – Mifare® contactless reader for 

the renewal of subscriptions, 

• Colour options on housing according to standard 

RAL panel, 

• Integrated bidirectional video over IP, 

• Intercom board, 


PARC SYSTEMS 



CODEX LP 550 

Pedestrian Access Reader 


This easy to use and small foot print equipment 

ensures efficient control of pedestrians access to 

car parks. 


system. 

FEATURES 

• Ticket reader will read and check hourly tickets, pass 

cards, conference/event tickets, pre-paid cards. 

• Video enclosure with 5”7 colour screen and IP 

camera for bi directional video assistance. Can 

also be used for advertisement : animations, text, 

videos… images (option). 

• Checks dates, time bands, black list cards. 

• All transactions and alerts are transmitted in real 

time to the Orbility® Multipark Central Management 

System. 




equipment. 

• The terminal’s memory stores transactions and alerts 

and transmits them when communication is restored. 

• Management and control of associated cark park 

access door. 

26 

www.parcsafe.com.au



(height x width x depth): 

– Reader enclosure : 268 x 203 x 113 mm. 

– Optional video enclosure : 268 x 203 x 113 mm. 

– Electrical cabinet : 250 x 360 x 150 mm. 

POWER SUPPLY 

OPERATING 


240V- 50Hz 

-20°C to +50°C. 

PARC SYSTEMS 


The equipment is composed of two separate modules: 

• A reader enclosure including: 

– A 2D barcode reader for the reading of tickets. 

– An intercom system. 

– A buzzer. 

• An electrical cabinet including: 

– A Windows microprocessor board for the 

management of the application program and 

the communication with the Orbility® Multipark 

Central Management System. 

– One power supply module. 

Ticket reader will read and check 

hourly tickets. 

OPTIONS 

• Video enclosure with 5”7 screen and IP camera. 

• Mifare® contactless card reader for subscribers. 



CODEX VA 550 

On Line Validator 


Used in shopping centres the VA 550 on line 

validators allow shop owners and car park 

operators to offer parking discounts by simply 

scanning the parking tickets. 


system. 

FEATURES 

• Discounts are immediately applied in the 

Multipark database by scanning the parking ticket 

on the validator. 

• Up to 999 discounts can be configured and used 

by up to 255 issuers (shops). 

• Tactile screen option allows cashier to select 

amongst 6 types of discounts and apply up to 4 

discounts for the same ticket. 

ADVANTAGES OF THE SOLUTIONS 

• Only 1 ticket to scan at the POF. 

• Types and amount of discounts are centrally managed 

in the Multipark system (time, money, tariff change, 

flat fee, %). 

• Follow up of the usage of discount with Multipark 

reports. 

Tactile screen option allows cashier to select amongst 6 types of discounts. 

28 

www.parcsafe.com.au


COUPONING 

PRINTER 


Used in shopping centres, the couponing 

printer allows shop owners and car park 

operators to offer parking discounts to hourly 

ticket users. 

PARC SYSTEMS 

FEATURES 

• Coding of a discount value on a 2D PDF 417 ticket 

voucher. 

• Coupon is printed by pressing on the front button of 

the printer (one discount). 

• Discount is granted after scanning the coupon on 

the barcode reader (optional) of the Pay On Foot or 

Cashier terminal (after insertion of the ticket). 

• Each coupon number is registered in the database 

of the Multipark system in order to avoid multiple 

usages (each coupon has a unique serial number). 

• The configuration of the type of discount (time, 

amount, percentage, tariff, flat fee) is done on the 

Multipark system. 

• Coupons contain a vendor code for usage report. 

• Coupon printer works Off-Line, perfect for 

installation in shopping centres. 

• Built in clock allows to define number of days of 

validity of coupons. 

• 3 buttons for choice of 3 types of discounts. 

Coupon is printed by pressing on the front button of the printer. 



EPARKSERVICES 


Orbility’s hosted couponing and validation 

solutions. eParkServices, is a Multipark parking 

management system solution. 

eParkServices is an online validation 

application ideal for shopping centers and city 

centers. It allows merchants to give discounts 

on the parking tickets to their customers using a 

smartphone or a PC connected to the internet. 

ADVANTAGES 

FOR PARKING OPERATORS: 

• Reduces consumable and 

printing costs 

• No wiring necessary and 

quick installation 

• Access to usage reports 

FOR SHOPPING CENTRES: 

• App available on 

smartphones or via web 

access 

FOR PARKING CUSTOMERS: 

• Easy for clients to use – only 

1 ticket needed to pay 

30 

www.parcsafe.com.au

shopping centers and city centers. It allows merchants to give 

discounts on the parking tickets to their customers using a 

smartphone or a PC connected to the internet. 

Simple and easy usage 

SIMPLE AND EASY USAGE 

parcsafe.com.au 

Scan tickets with 

a smartphone, or 

Validate the ticket 

Choose type of discount 

eParkServices 

Scan tickets with 

Orbility's web-based 

validation portal 

The validation is made directly by the merchant by scanning parking tickets 

using a smartphone or by accessing the Orbility web-based validation portal. 

The validation is made 

directly by the merchant by 

scanning parking tickets using 

a smartphone or by accessing 

the Orbility web-based 

validation portal. 

The merchant can choose 

which discounts to offer a 

customer from among a 

predefined list. 

PARC SYSTEMS 

The merchant can choose which discounts to offer a customer from among a 

predefined list. 

eParkServices also allows parking operators to generate and 

download Multipark parking discount vouchers in PDF format 

eParkServices from an internetconnected also allows parking PC. operators to generate and download 

Multipark parking discount vouchers in PDF format from an internetconnected 

Once downloaded, PC. parking vouchers can be printed or sent by 

Advantages: 

For parking operators: 

email to customers who can use them at Pay On Foot stations or 

• Reduces consumable and printing costsOnce at exit downloaded, terminals. parking vouchers can be printed or sent by email to 

• No wiring necessary and quick installation customers who can use them at Pay On Foot stations or at exit terminals. 


For shopping centres: 

• App available on smartphones or via web access 

For parking customers: 

• Easy for clients to use – only 1 ticket needed to DOWNLOAD pay 

DIGITAL DISCOUNT 

VOUCHERS 

PRINT 

VOUCHERS 

1 

SEND 

VOUCHERS 

BY EMAIL 

eParkServices offers: 

Advantages: 

• Total and easy control of discounts given via Multipark 

web reports 

For parking operators: 

• • Parking A solution vouchers that can can be be sent hosted by email in to Orbility’s customers. cloud or 


installed in your network 

For parking customers: 

• Customers can access parking vouchers on their smartphones 

for ease of scanning. 

FOR PARKING OPERATORS: 

ADVANTAGES 

FOR SHOPPING CENTRES: 

• Parking vouchers can 

• Customers can access 

be sent by email to 

parking vouchers on their 

eParkServices offers: 

customers. 

smartphonesfor ease of 

• Total and easy control of discounts given via Multipark web reports 

• A solution that can be • Access hosted to in Orbility’s usage reports 

scanning. 

cloud or installed in your network 


The avantages of Multipark Web 

• All menus accessible in less than 3 clicks 

contributing to an improved efficiency for operators 


and a faster and easier ownership of the application. 

• An interactive event window for a more efficient 

troubleshooting 

PARKACCESS 

and a better follow up of problem 

resolution. 

• Synthetic Orbility® or detailed Multipark visualisation Web modes for a quick 

change over from centralised supervision to troubleshooting 

of problems, on a piece of equipment. 

• Screen ParkAccess optimisation is the displaying web monitoring only the application most pertinent 

information in order to improve readability. 

of 

Less Multipark relevant Web. information Its access is accessible via an internet 

1 click. 

• “Trendy” browser flat offers design car “ developed park operators in cooperation quick and with 

web intuitive designers connection and ergonomists to their offering parking eye systems. comfort 

to users. 

• Centralisation of equipment video streams including 

IP based cameras, ANPR and equipment display. 

• A unique title management window allowing operators 

to quickly search the history of all types of 

titles (pass cards, hourly, congress, events tickets…) 

while attending customers. 

• Dynamic and contextual display of guidelines 

providing fast trouble shooting and reduced staff 

training. 

• A full integration with the existing applications of 

the Multipark series. 

• Easy access to all car parks connected to the same 

network. 

THE AVANTAGES OF MULTIPARK WEB 

1 

• All menus accessible in less than 3 clicks contributing 

to an improved efficiency for operators and a faster 

and easier ownership of the application. 

• An interactive event window for a more efficient 

troubleshooting and a better follow up of problem 

resolution. 

• Synthetic or detailed visualisation modes for a 

quick change over from centralised supervision 

to troubleshooting of problems, on a piece of 

equipment. 

• Screen optimisation displaying only the most 

pertinent information in order to improve readability. 

Less relevant information is accessible in 1 click. 

• “Trendy” flat design “ developed in cooperation with 

web designers and ergonomists offering eye comfort 

to users. 

• Centralisation of equipment video streams including 

IP based cameras, ANPR and equipment display. 

• A unique title management window allowing 

operators to quickly search the history of all types of 

titles (pass cards, hourly, congress, events tickets…) 

while attending customers. 

• Dynamic and contextual display of guidelines 

providing fast trouble shooting and reduced staff 

training. 

• A full integration with the existing applications of the 

Multipark series. 

• Easy access to all car parks connected to the same 

network. 

32 

www.parcsafe.com.au

Users are alerted 

in real time about 

events and alarms 

for rapid default 

or error type 

identification. 

PARC SYSTEMS 

Web browser access 

Multipark Web is an application that functions in thinclient 

mode providing a fast access to both local and 

distant car park management servers. It is instantly 

operational and doesn’t need the installation of heavy 

applications on operational workstations to get going. 

An inbuilt event window management application 

Inbuilt centralized event window application allows for 

constant monitoring of events and alerts and resolution 

tracking. Users are alerted in real time about events and 

alarms for rapid default or error type identification. For 

added comfort and enhanced flexibility, especially for 

large scale activity, constant supervision can be displayed 

on a second screen. 

Synthesized or detailed visualization modes of 

car parks and equipment improve the quality and 

clarity of information 

Only the events requiring immediate attention are 

displayed in synthesized visualization mode. 

Ergonomic, user-friendly equipment management 

window 

Equipment management window allows the operator 

to address all types of events: customer calls, ticket 

problems, equipment error or default… General status 

of equipment is rapidly visible using the dynamic 

display (e.g. barrier up or down). Customer assistance 

is reinforced through automatic equipment IP camera 

visualization and through integrated display of equipment 

screens in real time. All entry and exit equipment 

automatically display a photo of the license plate of the 

present vehicle. This window provides the operator with 

comprehensive set of controls for remote interventions 

on all equipment; barrier opening/closing, validation of 

season tickets, lost ticket printing, management of special 

events or specific entry lists… 

Instruction and information sharing inherited from 

the Web 

A social network type wall is displayed on the equipment 

management window; it allows users to share equipment 

or title related information. Contextual information and 

instructions help them choose the appropriate solution. 

Instruction related information fields are filled by users 

with valid access rights. 

Advanced title management window 

The advanced title management window allows operators 

to quickly find the history of all titles (tickets, congresses, 

pass cards.) and their associated payment means. 

This window opens simultaneously with the equipment 

status display. It systematically fills up with up to date 

information on titles currently being read by relevant 

equipment (subject to information being available of 

course). 

Multi-criteria search functions for history 

management 

Multipark Web allows to perform multi-criteria historical 

searches for all types of titles, operator actions, a wide 

range of equipment related events and operator driven 

actions. For an enhanced flexibility it is also possible to 

save searches for subsequent analysis. Results can be 

printed and exported in various formats or even sent to a 

chosen email address. 

Web inherited principles 

Multipark Web integrates search functions by completion; 

an interactive wall allows users to exchange information 

and offers an intuitive and sober design inspired by the « 

flat design » trend. 



VEHICLE BARRIER 

PS-VBLB-63PK 

Special Design for Parking and Revenue Control 

The PS-VBLB-63PK Vehicle Barrier has been specially 

designed for the use in conjunction with revenue control 

equipmnet for parking garages. The PS-VBLB-63PK Vehicle 

Barrier has the capacity to operate for 15000 cycles daily 

with open / close times ranging between 0.8 and 3 sec. 

Barrier arms are available straight or articulated and work 

in conjunction with multiple safety features. 


HOUSING DOOR 

Sheet metal DKP, thickness 2 mm, protected with cataphoresis and RAL 5015 painting. 

COVER 

Aluminium sheet 2mm, thickness 2mm, protected with with corrosion protection treatment 

and RAL 9010 painting. 

PAINTING Polyester powder baked at 250°, housing and door in RAL 5015, cover in RAL 9010. 

ARM 

GEARMOTOR 

STANDARD 

EQUIPMENTS 

OPTIONAL 

EQUIPMENTS 

Oval aluminium arm 84 mm x 57 mm, with reflective bands, option for articuled, unhinging 

or ejector arm. 

Three-phase gearmotor 230 V, 0.25 KW reversible. 

Body barrier with reversible gearmotor, compensator and arm clip. 

Frequency variator powered in 230 V single-phase, in 0.25 KW driving the acceleration and 

deceleration ramps, enabling the regulation of the opening and closing speeds. 

Logic control PLC enabling the inductive sensors operations. 

Inductive sensor without contact for the barrier operation. 

Maintaining opened or closed by current injection. 

Control push button on the PLC front. 

Information feedback on the terminal: 

- Presence detector feedback information (if loop is present). 

- Security detector feedback information (if loop is present). 

- Information feedback on terminal barrier «open». 

- Information feedback on terminal barrier «closed». 

- Information feedback on default synthesis. 

Articulated arm, with unhinging and ejection device. 

Controlled front unhinging removing all risk for pedestrians. 

Back unhinging avoiding the material deterioration in case of impact. 

Automatic hinging available with the front unhinging allowing the arm replacement due to 

an impact without intervention. 

Automatic lift arm in case of power failure. 

Aluminium sheet housing 

Integrated camera 

Specific color for the drum, door and cover. 

Security, presence, free opening, IR cell, magnetic loop,…. 

34 

www.parcsafe.com.au

PS-VBLB-63PK STANDARD OVAL ARM 

OPTIONAL EQUIPMENTS 

Type of barrier Passage width Arm Length Total weight 

PS-VBLB-63PK - 00 - - 50 kg 

PS-VBLB-63PK > 200 1,70 m 2,00 m 52 kg 

PS-VBLB-63PK > 300 2,70 m 3,00 m 54 kg 

PS-VBLB-63PK > 350 3,00 m 3,30 m 56 kg 

Mean cycles before failure 

5 000 000 cycles 

Mean time between failures 

15 000 hours 

Mean time to Repair 

15 minutes 

Protection 

IP54 

• PVC sealed template frame + 4 fixation 

bars 16 x 250 mm 

• + 8 bolts. 

• 3 m long carbon arm with anti-impact 

foam and sock protection Ø 85 mm, 

equipped with reflective bands. 

• 2-channel magnetic loop detector. 

• Fixed support post with rubber shock 

absorber. 

• Fixed support post with magnetic suction. 

• Adustable moving support. 

• Red / Green light set, directly assembled 

on the barrier. 

• Broken arm and open door detection… 

• Gearmotor brake causing a break of the 

arm in case of forced passage. 

• Aluminium sheet housing 

• Integrated camera 

PARC SYSTEMS 

INSTALLATION 

Conducts and cables : 

1. Power Supply: 

• Tube Ø 63 mm. 

• Cable U 1000 RO 2V 

• 3 x 2.5 mm2. 

2. Remote control: 

• Green Tube Ø 40 mm. 

• Low power cable Type SYT 

• 3 pairs 9/10. 

3. Magnetic loop tail: 

• Tube ø 30 mm. 

• Cabled loop tail. 

4. Sealing template frame: 

• 10 mm PVC base frame. 

• 4 anchoring bars Ø 16 X 250 mm. 

The template has to be levelled and 

must completely rest on the concrete 

foundation. Distance between each 

embedded shaft : 220 x 220 mm. 

1. Reversible gear motor group guaranteed 

without wear and tear. 

2. End of stroke position without contact 

guaranteed without maintenance. 

3. Compensation spring working in compression 

ensures a large number of cycles and a 

complete reopening in case of undervoltage. 

4. Frequency variator. 

5. PLC providing a possible evolution of 

operation. 


Camera housing 


SMART ANPR UNIT 

With motorized lens 

All-in-One Unit 

Embedded OCR eng 

Plug & Play connec 

Built-in Wiegand int 

Internal white lists 

Web-based configur 

Multidevice setup 

SmartLPR® Access is the latest generation of 

license plate recognition units designed to 

contribute to security and smart mobility in car 

parks. 

High reliability 

Smart light adaptat 

A single device integrates all that is needed to 

provide the highest reliability worldwide. Moreover, 

the webbased configuration and the remote control 

lens make the unit setup easier and more automatic 

than ever. The concept Smart is shown at its best 

through the Allin-One and state-of-the-art ANPR 

unit architecture and design. 

Colour plate recogn 

Multicountry recogn 

FEATURES 

Smart ANP 

• Remote control lens 

• All-in-One Unit 

• Embedded OCR engine 

• Plug & Play connectors 

• Built-in Wiegand interface 

• Internal white lists 

All-in-One 

License Plate Recognition 

• Web-based configuration 

• Multidevice setup 

• High reliability 

• Smart light adaptation 

• Colour plate recognition 

• Multicountry recognition 

All-in-One 

License Plate Recognition 

SmartLPR ® Access is th 

plate recognition unit 

security and smart mob 

A single device integrat 

the highest reliability w 

based configuration and 

the unit setup easier a 

The concept Smart is sh 

in-One and state-of-the 

design. 

36 

www.parcsafe.com.au 

Cabinet housing 

www.quercus.biz


OPERATING CONDITIONS 

MAXIMUM LANE WIDTH 

OPERABILITY 

OPERATION STATUS 

WORKING TEMPERATURE 

HOUSING 

MODELS 

DIMENSIONS (H X W X D) 

MATERIAL AND COLOUR 

PROTECTION 

CAMERA 

IMAGE SIZE 

CAMERA 

LIGHTING 

MOTORISED ZOOM LENS 

POWER 

CONSUMPTION 

POWER INPUT 

CONNECTIVITY 

COMMUNICATION PORTS 

INPUTS / OUTPUTS 

CONNECTORS 

REGULATORY ISSUES 

CE 

Up to 5.5 metres (High Res models) 

24 hours a day, 365 days a year 

External colour LED indicator 

From -25ºC to +50ºC | From -40ºC to +50ºC (Temperature Control models) 

Camera housing and cabinet housing | Optional OEM models are also available 

Camera housing: 148 x 148 x 225 mm | Cabinet housing: 622 x 203 x 202 mm 

Camera housing: white rugged aluminum | Cabinet housing: stainless steel 

Camera housing: IP67 | Cabinet housing: IP65* 

752 x 480 px | 1280 x 600 px (High Res models) 

Black & White, progressive scan | Colour, progressive scan (Colour plate 

recognition models) 

Infrared 850 nm | White 5650K-Cool White (Colour plate recognition models) 

5-50mm 

7,7W (DC) | 7,8W (AC)** 

12-24 V DC | 100-240 V AC (47-63 Hz) 

Ethernet 10 / 100 Mbps | Wiegand output interface 26/37 bits 

2 inputs | 1 output 

Waterproof Plug & Play circular connectors 

EMC 2004/108/EC - Class A (standards EN 55022, EN 55024, ESD compliant) 

FCC Class A digital devices / Title: 47 CFR Parts 2 and 15 

LVD 

PHOTOBIOLOGICAL 

SAFETY 

ENVIRONMENTAL 

Low Voltage Directive 2006/95/EC (standard EN 60950-1) (AC voltage models) 

IEC 62471 

IEC 60068-2-x 

PARC SYSTEMS 

* Functional zone IP65 / Whole cabinet IP56 - Type 3R. 

** Consumption may vary according to the model and/or working mode. Please, check the product manual and the data sheets. 

USER FRIENDLINESS 

• Adjust the zoom and the focus using the 

motorized lens. 

• Adjust the settings using the web-based 

configuration tool. 

• Replicate automatically the settings from one unit to 

the others. 

• Plug & Play connectors: no need to open the unit. 

• Embedded technology: everything is included in a 

single device. 

HIGH PERFORMANCE 

• Recognize countries from all over the world at the 

same time. 

• Optional colour plate recognition to recognize 

license plates that require colour detection or to 

obtain the number plate and the state of specific 

countries. 

• Built-in OCR engine developed by Quercus 

and proven in installations worldwide. Its highly 

technological dedicated hardware also contributes 

to the highest recognition rates on the market. 


38 

www.parcsafe.com.au

PRODUCT CATALOGUE 39 

PARC SYSTEMS

40 

www.parcsafe.com.au


PARC SYSTEMS

PARKING GUIDANCE SYSTEM

Parking guidance systems 

SMART PARKING HELPS INCREASE 

REVENUE AND MAXIMISE CARPARK USAGE 

PARKING GUIDANCE SYSTEMS OFFER 

REVENUE OPPORTUNITIES FOR RETAIL 

Parking guidance systems gather data from smart parking 

sensors to keep track of how many spots are available 

in a parking lot or facility. They then display dynamic 

information to drivers via signs, apps, or websites to 

guide them to available parking. 

Using a parking guidance system (also called smart 

parking, car counting systems or parking management 

systems) to guide more drivers into available spots using 

real time data helps to enhance the parking experience 

for potential customers, as well as benefiting your 

bottom line. 

What’s more, with the data you gain from a guidance 

system, you can tailor your business’s parking offer 

to make the most of revenue opportunities that may 

currently be slipping away. 

It’s quite common for retail carparks to have noncustomer 

vehicles present for large portions of the day. 

With a parking guidance system installed, you’ll have 

access to reliable data such as how many people from 

other commercial environments use your car parking; 

how many vehicles are present after your retail closes, 

and more. 

On the other hand, if you offer your own customers 3 

hours of free parking and the data shows limited usage 

beyond this, then there may be no business case for 

installing a revenue control system. 

In either scenario, data from a parking guidance 

system allows you to make informed decisions about 

incorporating a PARC system to control your parking and 

gain additional revenue. 

PARKING GUIDANCE 

Depending on the type of parking guidance system you 

opt for, and the level of reporting you want to achieve, a 

parking guidance system can readily be integrated with 

your existing parking infrastructure. 

HOW A PARKING GUIDANCE SYSTEM CAN 

IMPROVE YOUR REVENUE 

Ensuring user-friendly car parking is crucial, since 

potential customers are more likely to patronise 

businesses that have car parking readily and visibly 

available. 

Look for a parking guidance system that provides you 

with accurate management and reporting data that 

allows you to make accurate business decisions. For 

example, you can use this data to determine when your 

peak periods are, and how full your carpark is at different 

times of the day – with 99.9% accuracy. 

With this accurate data, you can offer your customers 

flexible payment options or parking offers such as early 

bird rates and after hours parking offers – all with an eye 

on increasing revenue for your business. 

Perhaps the data reveals that you have full parking 

in the morning and empty in the afternoon. In this 

case, dynamic pricing that offers discounted rates in 

the afternoon could result in a more consistent flow 

of customers and therefore increase your overall daily 

revenue intake. 

Parking guidance system data is particularly useful if you 

don’t yet have a PARC system installed at your carpark. 

It can provide you with the necessary customer data to 

decide whether there’s a business case for installing a 

revenue control and boom gate system. 

At Parcsafe we offer 2 main types of parking guidance 

systems. 

Sencir Guidance 

As its name suggests, a sensor based parking guidance 

system uses individual car bay sensors that coordinate 

with red & green lighting system to show drivers 

available parks. 

On the plus side, a sensor based system provides 

information at-a-glance to drivers – provided that the 

sensors are accurate and reliable. The downside of 

sensor based systems is their relatively high cost per bay. 

OpenSpace TM 

Instead of working in individual bays, an open space 

system works on the overall carpark area. OpenSpace 

TM guidance systems show drivers the number of spaces 

available in each aisle, level, or separate carpark 

depending on your site. 

OpenSpace TM systems offer many advantages. They 

guarantee 99.9% accuracy, and are extremely costeffective 

at about 30%-40% of the cost of a camera or 

sensor based system. Very quick to install, they require no 

integrated infrastructure, and can easily be retro-fitted in 

an existing carpark. 

Depending on size of your carpark, PARCsafe could help 

you have an OpenSpace TM guidance system up and 

running in about 6 hours. 

We believe it’s the most cost-effective and reliable 

parking guidance system available. PARCsafe have 

partnered with Parking Logix to provide OpenSpaceTM 

Parking Guidance to the Australian market. 


43


OPENSPACE® 

GUIDANCE 

COUNT 

OpenSpace Counting Solutions 

Smart sensors embedded into speed humps 

or directly into road surfaces detect and 

count each vehicle that enters or exits your 

lot. The sensors communicate wirelessly 

to data collectors and signs to display real 

time occupancy to drivers. 

COMMUNICATE 

OpenSpace VMS 

The Parking Logix OpenSpace single, multilevel 

& multi lot parking solutions include 

the OpenSpace Variable Messaging Sign 

(VMS). This sign communicates wirelessly 

with OpenSpace using our Data Collector 

to display real-time occupancy to drivers. 

CONTROL 

OpenSpace Cloud 

The OpenSpace Cloud stores all your 

parking data in the cloud so that you, or 

anyone looking for parking spots, can 

access it. Manage system settings, view 

up to the minute statistics, and generate 

detailed reports via the OpenSpace 

cloud with zero dependence on local IT 

infrastructure. 

44 

www.parcsafe.com.au

COMMUNICATE 

OpenSpace VMS 

The Parking Logix OpenSpace single, multilevel 

& multi lot parking solutions include 

the OpenSpace Variable Messaging Sign 

(VMS). This sign communicates wirelessly 

with OpenSpace using our Data Collector 

to display real-time occupancy to drivers. 


CONTROL 

OpenSpace Pro Software 

The OpenSpace parking solution also 

includes the OpenSpace Pro software 

package. Set times of sign operation, reset 

or adjust the counter, and get statistics 

related to garage occupancy. OpenSpace 

Pro comes pre-loaded on a Windows 

tablet or laptop that connects directly to the 

OpenSpace VMS via Bluetooth. 


COUNT 

OpenSpace Counting Solutions 

The same equipment as utilised for open 

space car parks can be used in Multilevel 

parking garages. Should the multi level 

have non penetrating concrete or post 

tension slab the sensor can be glued to the 

floor to eliminate the need for any floor 

penetration 

45



OPENSPACE® 

Introducing OpenSpace® 

Laptop connects to sign via Bluetooth 

Multi Lot 

Dashboard 

Report 

Generation 

Sign 

Reset 

Sign 

Scheduling 

Single 

Sign-On Sign-on 

Exportable 

Data 

FEATURES 

• 99% Accuracy 

• Cost Effective Solution 

• Quick Installation 

• No Annual Maintenance fees required 

• Web Dashboard and API 

• 24 month warranty 

BENEFITS 

• Increase Lot Revenue 

• Improved customer experience 

• Decrease congestion and emissions 

• Monitors Parking Statistics 

46 

www.parcsafe.com.au


Outdoor Surface 

No No local power needed 

No No local data services needed 

Outdoor Surface 

• No local power needed 

• No local data services 

needed 


Indoor Surface 

Adhesive option for for post tension concrete 

No No impact to to protective surface 

membranes 

Traffic calms humps to to increase 

pedestrian safety 

Indoor Surface 

• Adhesive option for post 

tension concrete 

• No impact to protective 

surface membranes 

• Traffic calms humps to 

increase pedestrian safety 

Reduces Emissions 

& & Congestion 

Increases utilisation 

utilization 

Provides 

Reduces customer stress 

through traffic direction 

traffic 

occupancy data 

stress and frustration 

direction PRODUCT CATALOGUE 

47 

5 

5


SENCIR PARKING GUIDANCE 

Solutions for efficient parking 

CirPark Platform 

The CirPark Platform manages all CirPark Solutions from one site. It is a powerful solution that integrates iPark, 

LEDPark and EVPark systems. A Platform made of CirPark Scada software and third party integration. It is a 

multi-platform and mobile-oriented software infrastructure. Unique Platform for the complete Efficient Parking. 

LOCAL PLATFORM 

CirPark Scada 

Software 

CLOUD PLATFORM 

CirCloud 

Server Platform 

 

iPark 

XML API 

Application Protocol Interface API 

for integrators/operators open for 

integrators. 

Cloud API 

API for integrators/operators 

CirMobile 

Mobile Application for Android/iOS it 

consumes Cloud API 

iPark is one of the most impressive and long-lasting systems on the market for Guidance, Find Your Car 

and Counting Systems. Integrated within the CirPark Platform, it becomes a powerful management tool that 

optimises the traffic in car parks and provides user satisfaction, giving them the information they need, when 

they need it. Operators, on the other hand, have an excellent tool to gain the loyalty of their customers, 

optimise traffic and occupancy, and reduce maintenance and operation. 

Guidance System Software 

Indoor/Outdoor Dynamic Guidance 

system that manages the user 

nformation in order to optimise the 

occupancy and traffic of the parking 

facilities. Ultimate technology sensors 

and panels, plug&play and long-lasting. 

Worldwide product range oriented. 

Counting System 

Level & Area counting system with full 

range of detectors and panel display 

information for Indoor & Outdoor 

parking facilities. 

Find Your Car 

Powerful system able to provide carfinding 

solutions based on License 

Plate Recognition within lanes or in 

each parking space, offering users the 

location and route to their own car via 

the user application. 

48 

www.parcsafe.com.au

GUIDANCE SYSTEM 

Optimises traffic in car parks and provides user satisfaction by giving them the information they need. 

Owner Benefits 

• Customer Loyalty and Car Park reputation. 

• Efficient Traffic and Occupancy management. 

• Operational and Maintenance Reduction costs. 

• Full remote control system with auto-pilot operability. 

• Completely customizable Reports, RealTime Screens 

and HeatMaps. 

• Manage Guidance, Ilumination & EVChargers from 

one site. 

Customer Benefits 

• Less time spent on locating free parking spaces. 

• Less stress and increased ease of parking. 

• Easy Location of Handicapped, EVCharge & Reserved 

places. 

SENSORS DISPLAYS CONTROL ACCESORIES 

Front-End Bay Sensor 

INDOOR 

VMS Range 

IDOOR 

Converter 

INDOOR/OUTDOOR 

License 


Preconectorized cable 

INDOOR 


Inside Bay Sensor 

INDOOR 

RGB Range 

INDOOR /OUTDOOR 

Controller 


Server 


Fixing Elements 

INDOOR 

High Luminosity Range 

OUTDOOR 

Optimises traffic in car parks and 

provides user satisfaction. 

Panel Parking 


OUTDOOR 


49

IPARK / GUIDANCE SYSTEM / SENSORS 

iPark is one of the most impressive and long-lasting systems on the market for Guidance, Find Your Car and Counting 

Systems. Integrated within the CirPark Platform, it becomes a powerful management tool that optimises the traffic in 

car parks and provides user satisfaction, giving them the information they need, when they need it. Operators, on the 

other hand, have an excellent tool to gain the loyalty of their customers, optimise traffic and occupancy, and reduce 

maintenance and operation. 

FRONT END SENSORS 

CENTRE OF BAY SENSOR+INDICATOR 

TRILOGY 

460315 

Ultrasonic Sensor RGB led indicator and 

led lighting system for the detection and 

indication of the occupation status and for a 

courtesy lighting of the parking space. High 

brightness RGB led indicator Power: 24/48 

Vdc. Consumption: 5 W. Communications: 

RS-485. It has connector for Power+Data. 

Extended Temperature Range -20 to 60ºC. 

Remote Configurable Firmware. Sensing 

distance and brightness intensity adjustable 

by software. Recommended installation 

height between 2.10 and 3.5 meters. IP54 

Protection. 

SP3-RG 

460128 

Ultrasonic sensor and Indicator light on 

the same equipment, for the detection 

and indication of occupancy status of the 

parking space. Power+data Connector and 

external light connector. Power supply: 24 

Vdc. Consumption: 1.2 W. Communications: 

RS-485. Extended Temperature Range -10 

to 50ºC. Remote Configurable Firmware. 

Recommended installation height between 

2.30 and 3.5 meters. Detection distance 

adjustable by software. It has Red-Green led 

indicator. 

BILOGY 

460313 

Ultrasonic Sensor and RGB led indicator 

for the detection and indication of the 

occupancy status of the parking space. High 

brightness RGB led indicator Power: 24/48 


RS-485. It has connector for Power+data. 

Extended Temperature Range -20 to 60ºC. 

Remote Configurable Firmware. Sensing 

distance and brightness intensity adjustable 

by software. Recommended installation 

height between 2.10 and 3.5 meters. IP54 

Protection. 

SP3-RB 

460129 

Ultrasonic sensor and Indicator light on 

the same equipment, for the detection 

and indication of occupancy status of the 

parking space. Power+data Connector and 

external light connector. Power supply: 24 


RS-485. Extended Temperature Range -10 

to 50ºC. Remote Configurable Firmware. 

Recommended installation height between 

2.30 and 3.5 meters. Detection distance 

adjustable by software. It has Red-Blue led 

indicator (2000 mcd). 

iPark is one of the most impressive and long-lasting systems 

on the market. 

50 

www.parcsafe.com.au

IPARK / GUIDANCE SYSTEM / INDOOR DISPLAYS 

VMS 

PS2- 

VMS-48 

460329 

Indoor display to indicate free spaces 

and direction. Matrix led Bicolor - 

Alphanumeric - 2 digits + Cross/Arrow. 

10 arrow positions. Swap the position of 

the digits and arrow, functionalities like 

reverse digits, avoid zeros and show ‘FULL’. 

Brightness intensity adjustable by software. 

Height Digit 120 mm. Dimensions: 324 x 

165,23 x 39 mm. 

PS-CA-48 

460334 

Display Cross/Arrow, address indication of 

Free Places. Arrow Color: Green-Red. 10 arrow 

positions. Brightness intensity adjustable by 

software. Height Arrow 120 mm. Dimensions: 

164 x 165,23 x 39 mm. 

PS3-VMS-6 

460330 

PS4-VMS-8 

460331 


and direction. Matrix led Bicolor. Shows 

text up to 6 characters. Alphanumeric. 3 

digits + Cross/Arrow. 10 arrow positions. 

Swap the position of the digits and arrow, 

functionalities like reverse digits, avoid 

zeros and show ‘FULL’. Brightness intensity 

adjustable by software. 


and direction. Matrix led Bicolor. Shows 

text up to 8 characters. Alphanumeric. 4 

digits + Cross/Arrow. 10 arrow positions. 

Swap the position of the digits and arrow, 

functionalities like reverse digits, avoid 

zeros and show ‘FULL’. Brightness intensity 

adjustable by software. 

PS-VMS-P-48 

460332 

PS-VMS-F-48 

460328 

Indoor display in mode: [symbol ‘P’ + 3 

digits]. Matrix led RGB. Symbol customizable 

by software. 6 character or scroll text up to 15 

characters (P + 3 digits). Brightness intensity 

adjustable by software. Height Digit 120 mm. 

Dimensions: 404 x 165,23 x 39 mm. 

Interior display in configuration [symbol ‘P’ 

+ 3 digits + Cross / Arrow]. RGB led matrix. 

Customizable Symbol by software. Text of 6 

characters or scroll up to 15. Power: 24 Vdc. 

Consumption 24 W. Communication: RS-485. 

Brightness intensity adjustable by software. 

Height Digit 120 mm.Dimensions: 564 x 165,23 

x 39 mm. 


PS4- 

VMS-F-48 

460333 

Interior display in configuration [‘P’ symbol + 4 digits + Cross / Arrow]. RGB led matrix. Customizable Symbol by 

software. Text of 6 characters or scroll up to 15. Power: 24 Vdc. Consumption 25.5 W. Communication: RS-485. 

Brightness intensity adjustable by software. Height Digit 120 mm.Dimensions: 644 x 165,23 x 39 mm. 

RGB 

PS2-RGB 

460663 

PS3-RGB 

460666 

PS4-RGB 

460669 

Indoor display in mode: [2 digits + 

Cross/Arrow]. RGB LEDs with 120º angle. 

8 predefined digit colors. Height digit 125 

mm. Right/Left and Up/Down controllable 

arrow. Arrow: Green/Red and Cross: Red. 

Indication of free places and address. 

Display “FULL” or “000 Arrow/Cross”. 

Interior display in mode: [3 digits + 

Cross/Arrow]. RGB LEDs with 120º angle. 

8 predefined digit colors. Height digit 

125 mm. Right / Left and Up / Down 

controllable arrow. Arrow: Green/Red and 

Cross: Red. Indication of free places and 

address. Display “FULL” or “000 Arrow/ 

Cross”. 

Indoor display in mode: [4 digits + Cross/ 

Arrow]. RGB LEDs with 120º angle. 8 

predefined digit colors. Height digit 125 

mm. Right/Left and Up/Down controllable 

arrow. Arrow: Green/Red and Cross: Red. 



PS2-RGB-EV 

460661-EV 

PS3-RGB-EV 

460664-EV 

PS4-RGB-EV 

460667-EV 

PS2-RGB-P 

460661 

Customizable 

Backlighted 

PS2-RGB-M PS2-RGB-P-P 

460661-M 460661-P-P 

P 

460664 

PS3-RGB-P 

Customizable 

Backlighted 


460664-M 460664-P-P 

P 

PS4-RGB-P 

460667 

Customizable 

Backlighted 


460667-M 460667-P-P 

P 

Indoor display in mode: [Symbol + 2 digits 

+ Cross/Arrow]. RGB LEDs with 120º angle. 

Customizable symbol with backlit vinyl. 8 

predefined digit colors. Height digit 125 mm. 

Right/Left and Up/Down controllable arrow. 

Arrow: Green/Red and Cross: Red. Indication of 

free places and address. Display “FULL” or “000 

Arrow/Cross”. 


















51

SENCIR / GUIDANCE SYSTEM / OUTDOOR DISPLAYS 

HIGH LUMINOSITY 

RGB 

OD.11 

D2-OD.11 

460245 

D3-OD.11 

460145 

D4-OD.11 

460246 

Outdoor display, indicating the number of 

parking spaces available, high-luminosity red LED. 

Digit height: 110 mm. IP54. Luminosity control 

via software. Aluminium casing. Communication: 

RS485. Input power: 230 VAC. 

Outdoor display 2 digits. 335mm x 209mm x 

70mm. 10W. 


70mm. 15W. 


70mm. 20W. 

PS3-RGB-O 

460666-O 

Outdoor display with [3 digits + 

Cross/Arrow]. RGB LEDs with 120º 

angle. 8 predefined digit colors. 

Height digit 125 mm. Right / Left 

and Up / Down controllable arrow. 

Arrow: Green/Red and Cross: Red. 



Dimensions: 404 x 165,23 x 39 mm. 

Stock available. 

OD.20 

D2-OD.20 

460247 

D3-OD.20 

460232 

D4-OD.20 

460248 


parking spaces available, high luminosity red 

LED. Digit height: 200 mm. Luminosity control 




70mm. 25W. 


70mm. 35W. 


70mm. 45W. 

OD.30 

D2-OD.30 

460242 

D3-OD.30 

460243 

D4-OD.30 

460244 


parking spaces available, high luminosity red 

LED. Digit height: 300 mm. Luminosity control 




70mm. 25W. 

Outdoor display 3 digits. 676mm x 381mm. 

37W. 


70mm. 48W. 

PANEL PARKING 

Display OPEN / 

CLOSED 

460808-EN/ESP/ 

FR/CA 

Display LEDs 590x140x40 mm Text available 

in 4 languages: English (OPEN/ CLOSED), 

French (LIBRE/ COMPLET), Spanish (ABIERTO/ 

CERRADO), Catalan (OBERT/ TANCAT). LED 

5mm. Colours: green/red. Digit height: 82mm. 

Input power: 230 V 50Hz. 

Dimensions: 750 x 250 x 100mm 

Panel Parking 

460187 

Panel with information about the 

capacity of the car park, per floor or 

overall. 2-3-4 digit displays. Panel 

with information about the capacity of 

the car park, per floor or overall. 2-3-4 

digit displays. Advanced, Basic and 

Outdoor Displays. Digit colour: RGB or 

Red. Brightness intensity adjustable by 

software. 

Panel Parking 

‘P’ with OPEN/ 

CLOSED display 

Panel Parking ‘P’with OPEN/CLOSED display. 

Structured made off 2 mm aluminium plate. 

Folded and welded, painted in textured black 

epoxy. Backlight by LED. Dimensions: 1200mm 

x 940mm x 130mm. 6mm front antivandal 

polycarbonate with translucent vinyl labelling. 

Window with display visualization and solar 

protection film. 

52 

www.parcsafe.com.au

SENCIR / GUIDANCE SYSTEM / CONTROL 



53

SENCIR 

Counting system 

Level & Area counting system with full range of detectors and information panels for Indoor & Outdoor parking 

facilities. This system offers 3 different types of detection to control the access into different areas with reduced 

equipment and high levels of accuracy. It includes Autonomous Control Units to automatize the counting and control of 

any area. This is possible with embedded CirPark Scada that makes this system smart. 

DETECTORS DISPLAYS CONTROL 

Inductive Loop Detectors 


VMS Range 

INDOOR 

Control Unit for crossingzone 

detectors 

INDOOR/ OUTDOOR 

Controller 


Fotocell crossing-zone 

Detectors 


RGB Range 

INDOOR / OUTDOOR 

Converter 


Server 


Ultrasonic crossing-zone 

Detectors 


High Luminosity Range 

OUTDOOR 

Ecupark 


License 


Panel Parking 

INDOOR/ 

OUTDOOR 

54 

www.parcsafe.com.au

SENCIR 

Find your car 

Powerful system able to provide car-finding solutions based on QR Code or License Plate Recognition within lanes or in 

each parking space, offering users the location and route to their own car via the user application. 

Features 

License Plate Recognition by lane or within defined zones in small parkings to facilitate user’s car location. 

Car Recognition within each special parking space, such as EV charging spaces or reserved VIP bays. 

Combining Find Your Car with CirPark Guidance System provides a car location service with great reliablity. 

Combining Find Your Car with CirPark Guidance System provides a car location service with great reliablity. 

CAMERAS TERMINAL CONTROL 

Three Bay camera 

INDOOR 

Kiosk User Interface 

INDOOR 

Switch POE 

INDOOR 


Lane Cameras 


Main Gigabit Ethernet Switch 

INDOOR 

Server 

INDOOR 

License 

INDOOR 


55


ONE WAY TRAFFIC 

SIGNAL SYSTEM 

FOR BASEMENT 

CARPARKS 

Parcsafe provide traffic light ramp controllers 

for single lane access into basment carparks. 

These PLC controlled panels control the flow 

of traffic by setting the traffic light sequence 

depending on the direction of the vehicle flow. 


SIZE 

100mm 

COLOUR 

Red / Green 

LIGHT INTENSITY 

Red ≥ 150cd; Green ≥ 200cd 

TEMPERATURE -4C to +80C 

PROTECTION 

IP65 

VOLTAGE 

24vdc 

HOUSING MATERIAL Polycarbonate 

LIFE SPAN 

≥ 80 000 hrs 

WEIGHT 

2.1kg 

VIEWING ANGLE 30 

100mm Red / Green Traffic Light 

PARCSAFE can work 

with Traffic Engineers 

and building designs 

to engineer a solution 

that best suits the 

requirements of the 

site and any council 

DA requirements. 

56 

www.parcsafe.com.au

Each basement ramp would work on the following controller instructions as standard 

RAMP CONTROLLER INSTRUCTIONS 

L1 

L2 

A B C D 


Vehicle Direction Inductive Loops: 

AB — CD 

DC — BA 

Parcsafe utilize a range of both Loop detection technology 

along with Sensor technology to gain the best and most 

reliable system to deliver on the engineer’s requirements 

OPERATION 

There are three modes of operation; Standard, Simple and Manual. 

STANDARD MODE - Traffic lights RED both directions. 

1. The inductive loops AB and CD function as “ramp request” sensing vehicle direction and position. 

2. Vehicle approaches Loop A, the back away timer starts. If the vehicle does not trigger Loop B within the back 

away time the traffic light stays RED. This allows for sites where loop A position may be adjacent to parking bays 

or secondary ramps. 

3. Vehicle proceeds forward trigging Loop B, traffic light L1 turns GREEN AB direction only and the transit timer 

starts (default 40 seconds). 

4. The vehicle travels to Loop C which turns L1 light back to RED. 

5. If a vehicle proceeds through Loop AB but does not reach Loop C within the transit time limit (car stalls, exits via 

slip lane, etc.) the lights will FLASH (both directions) for the period of the ERROR timer – after this time normal 

signal operation is resumed. Default ERROR time is 10 seconds. 

6. If you do not wish the Error function to operate – set this timer to zero. 

Remote monitoring of the Error condition can be achieved by connecting a signal device to Output 2. 

These PLC controlled panels control the flow of traffic by setting the 

traffic light sequence depending on the direction of the vehicle flow. 


57

NO LOCAL DATA SERVICES NEEDED 

NO LOCAL POWER NEEDED 

58 

www.parcsafe.com.au



59

60 

www.parcsafe.com.au



61

VEHICLE ACCESS SYSTEMS 

62 

www.parcsafe.com.au

Vehicle Access Systems 

WORLD-LEADING DESIGNS FOR SECURE 

PARKING ACCESS 

In today’s world there is an obvious increasing 

requirement for secure parking access points, along with 

the ability for touchless or contactless technology points. 

PARCsafe can provide you with both. 

Our vehicle access control solutions come from a precise 

selection of qualified global suppliers. They provide 

equipment that is reliable, scalable, and can be delivered 

on time and to budget. 

VEHICLE ACCESS CONTROL 

From barriers for tunnels and bridges to paid parking, 

toll booths and secure access to residential and industrial 

sites, PARCsafe have the solution for your requirements. 

We have partnered with several global manufacturers 

to bring a comprehensive cross section of products to 

market, ensuring that we can provide you with the best 

solution for your application. 

VEHICLE ACCESS 

We work hard to ensure we recommend, design, supply 

and install only the best fit-for-purpose access control 

systems. This approach offers you the best in safety and 

security, and years of low-cost maintenance. 

Retractable Bollard or Hostile Vehicle Mitigation Products 

Our retractable bollard or hostile vehicle mitigation 

product also allow you to provide security by design 

while still allowing for practical use and ability to service 

emergency response equipment. 

Bollards allow for the free flow of pedestrian and cyclists 

while restricting access to vehicles. Retractable bollards 

can allow for vehicles on special request. 

Designed to complement the fixed bollard range, 

retractable bollards are installed for controlling or 

directing vehicles in areas including traffic gates, 

playgrounds, roadways, malls, parks, landscapes, and 

pathways. They are the perfect carpark security solution 

for securing wide perimeter entrances. 

PARCsafe bollards are available in a wide range of 

operating configurations and appearances to best fit your 

site’s requirements. Retractable bollards can be matched 

with fixed or removable options. 

Bollards can be provided with a crash rating and certified 

with different levels of functionality. Retractable bollards 

that still function after crash impact are available from 

PARCsafe. 



VELOCITY 

Automatic Industrial Vehicle Barrier 

The Velocity Vehicle Barrier complete with the latest 

Swiftdrive Technology is designed for all Interior or 

exterior installations. It can operate in high volume 

access and with medium levels of security for 

Parking Garages, Shopping centers, commercial 

building, apartments, industrial complexes, 

warehouses and mining environments. 

UNIQUE FEATURES OF THE VELOCITY VEHICLE BARRIER 

RELIABLE 

TECHNOLOGY 

DURABLE 

FEATURES 

GUARANTEED 

MANUFACTURED 

TO LAST 

• 100% duty cycle - suitable for high volume applications 

• SwiftDrive® brushless DC motor with planetary gearbox 

– High speed operation (four adjustable raise and lower speed settings) 

– Seamless precise speed control with dynamic braking and slow stop 

– Intelligent collision detection and mid cycle auto-reverse 

– Highly reliable, highly efficient and high power-to-volume ratio 100W motor 

– Large torque output over a vast speed range 

– Brushed DC motors are limited to a 10 000 hour life span (+/-500 000 operations) as 

the brushes are always in contact with the rotor shaft, unlike brushess DC motors which 

do not have any brushes and do not have that limitation) 

– No worm gear which is prone to severe wear 

– No proximity sensors or microswitches required for positioning 

• Embedded microcontroller 

• Relay output for raised and lowered positions 

• Integrated dual safety loop detector (one dectector can also be allocated for free exit) 

• 4.5A power supply - barrier is run from the power supply, not battery driven as batteries can 

become exhausted over time 

• Built-in battery backup (7Ah) with battery protection 

• Can operate with a solar powered system 

• Slim, low profile cabinet (272mm x 256mm) 

• Adjustable compression springs for barrier arm balancing - no tension springs used 

• Easy change of handing - can be done effortlessly in under two minutes 

• Wireway through centre of shaft for LED light strip or barrier arm impact detection safety edge 

• Harmonic motion drive arm mechanism 

• Mechanical locking in the lowered position 

• Effortless mechanical override for manual operation 

• Sturday octagonal barrier arm with integrated LED light strip, diffuser and red reflective tape 

• Available in powder coated mild steel and 3Cr12 stainless steel, brushed 304 and 316 

grade stainless steel 

• 24 month guarantee 

64 

www.parcsafe.com.au


INPUT VOLTAGE 

100V - 240V AC ±10% at 50Hz 

DRIVE 

MOTOR DETAIL 

GEARBOX 

MOTOR POWER SUPPLY 

DUTY CYCLE 

BARIER ARM LENGTH 

OPENING SPEED 

CABINET SIZE 

CABINET WEIGHT 

BARRIER ARM DETAIL 

BARRIER ARM WEIGHT 

MANUAL OVERRIDE 

OPERATING TEMPERATURE 

POWER FAILURE 

OPERATION 

COLLISION DETECTION 

SAFETY CONTROL 

SYSTEMS INTEGRATION 

RELAY OUTPUTS 


SAFETY 

OPTIONAL EXTRAS 

BARRIER ARM 

ACCESSORIES 

SwiftDrive® 

BLDC, 24V DC, 100W 

Planetary 

27.6 V DC, 4.5A, 120W 

100% - rated for continuous non-stop operation 

3m, 3.5m, 4m, 4.5m, 5m, 5.5m, and 6m 

• 3m -1.1 seconds 

• 4m - 2 seconds 

• 5m - 2.5 seconds 

• 6m - 3 seconds 

1077mm H x 274mm D x 258mm W (Request full drawing details); 

Unit Depth including Arm - 349mm 

60kg 

86mm x 43 mm, 1.5mm wall thickness, powder coated white aluminium with red 

reflective tape and integrated RGB LED 

1.1kg per metre 

Secure internal easy-pull lever arm 

-15°C to +60°C 

Two 12V 7Ah batteries 

Motor embedded hall sensors 

Dual channel safety loop detector and input for any external sensor 

• Integrates with all access control, revenue control and time & attendance systems 

• Triggered through a normally open dry contact 

• Free exit loop feature build-in as standard 

Open and closed relay outputs 

• 3Cr12 stainless steel with UV resistant exterior grade powder coat * 

• 316 grade brushed stainless steel * 

• A variety A variety of custom colour options available upon request available on 

request 


• Dual channel loop detector (integrated as standard) 

• Infrared beam transmitter and receiver kit ( 10m range ) 

• Photoelectric, diffuse sensor (3m range) - non-invasive 

• High security Mul-T-Lock for the barrier door 

• Traffic light (LED type) 

• Flashing/Solid courtesy light fitted on cabinet (activated when barrier is in use) 

• Single or double pushbutton in plastic housing 

• One button or three button remote control transmitter and receiver 

• Card dropbox (intelligent and unintelligent types) 

• Reader and camera mounting boxes (special designs to customer specifications) 

• Car and car/truck goosenecks with optional weather cowls 

• Articulated arm kit (folding arm kit) for low ceilings (fitted under the barrier arm 

for maximum height clearance) 



FEATURES 

• Benefit from the reliability of the latest SwiftDrive® 

technology 

• High speed operation with low power consumption 

• Integrated OPTIC LED light strip for maximum 

visibility, safety and aesthetics 

• Built-in battery backup 

• Compact cabinet design Counter balance 

compression springs 

• Articulated arm kit fitted below barrier arm for 

maximum height clearance 

• 100% duty cycle 

• Unlimited number of daily operations 

• Patent pending design- 

COLOUR EXAMPLES 

WHITE / BLUE YELLOW / RED STAINLESS STEEL 

Full ral colour range is availablenge 

BRANDED 

WRAPPED FINISH 

Customised with your branding 

Seamless precise speed control with dynamic braking and slow stop. 

66 

www.parcsafe.com.au

VELOCITY VEHICLE BARRIER STAR INSTALLATIONS 


THE VELOCITY RANGE - OPTIONS 




PS-VBLB-63PK 

Special Design for Parking and Revenue 

Control 

The PS-VBLB-63PK Vehicle Barrier has been 

specially designed for the use in conjunction 

with revenue control equipmnet for parking 

garages. 

The PS-VBLB-63PK Vehicle Barrier has the capacity 

to operate for 15000 cycles daily with open / close 

times ranging between 0.8 and 3 sec. Barrier arms 

are available straight or articulated and work in 

conjunction with multiple safety features. 


HOUSING DOOR 

COVER 

Sheet metal DKP, thickness 2 mm, protected with cataphoresis and RAL 5015 painting. 

Aluminium sheet 2mm, thickness 2mm, protected with with corrosion protection treatment 

and RAL 9010 painting. 

PAINTING Polyester powder baked at 250°, housing and door in RAL 5015, cover in RAL 9010. 

ARM 

GEARMOTOR 

STANDARD 

EQUIPMENTS 

OPTIONAL 

EQUIPMENTS 

Oval aluminium arm 84 mm x 57 mm, with reflective bands, option for articuled, 

unhinging or ejector arm. 

Three-phase gearmotor 230 V, 0.25 KW reversible. 

Body barrier with reversible gearmotor, compensator and arm clip. 

Frequency variator powered in 230 V single-phase, in 0.25 KW driving the acceleration 

and deceleration ramps, enabling the regulation of the opening and closing speeds. Logic 

control PLC enabling the inductive sensors operations. 

Inductive sensor without contact for the barrier operation. Maintaining opened or closed 

by current injection. Control push button on the PLC front. 

Information feedback on the terminal : 

• Presence detector feedback information (if loop is present). 

• Security detector feedback information (if loop is present). 

• Information feedback on terminal barrier «open». 

• Information feedback on terminal barrier «closed». 

• Information feedback on default synthesis. 

• Articulated arm, with unhinging and ejection device. 

• Controlled front unhinging removing all risk for pedestrians. 

• Back unhinging avoiding the material deterioration in case of impact. 

• Automatic hinging available with the front unhinging allowing the arm replacement 

due to an impact without intervention. 

• Automatic lift arm in case of power failure. 



• Specific color for the drum, door and cover. 

• Security, presence, free opening, IR cell, magnetic loop,…. 

68 

www.parcsafe.com.au


• PVC sealed template frame + 4 fixation 

bars 16 x 250 mm 

• + 8 bolts. 

• 3 m long carbon arm with anti-impact 

foam and sock protection Ø 85 mm, 

equipped with reflective bands. 

• 2-channel magnetic loop detector. 

• Fixed support post with rubber shock 

absorber. 

• Fixed support post with magnetic suction. 

• Adustable moving support. 

• Red / Green light set, directly assembled 

on the barrier. 

• Broken arm and open door detection… 

• Gearmotor brake causing a break of the 

arm in case of forced passage. 



PS-VBLB-63PK PK SPEED PASSAGE 

Type of barrier Passage width Arm Length Total weight 

PS-VBLB-63PK - 00 - - 50 kg 

PS-VBLB-63PK > 200 1,70 m 2,00 m 52 kg 

PS-VBLB-63PK > 300 2,70 m 3,00 m 54 kg 

PS-VBLB-63PK > 350 3,00 m 3,30 m 56 kg 

Barrier arms are available straight or 

articulated and work in conjunction 

with multiple safety features. 




• Cable U 1000 RO 2V 

• 3 x 2.5 mm2. 


• Green Tube Ø 40 mm. 

• Low power cable Type SYT 

• 3 pairs 9/10. 


• Tube ø 30 mm. 





INSTALLATION 

The template has to be levelled 

and must completely rest on the 

concrete foundation. Distance 

between each embedded shaft 

: 220 x 220 mm. 


1. Reversible gear motor group guaranteed 

without wear and tear. 

2. End of stroke position without contact 

guaranteed without maintenance. 

3. Compensation spring working in compression 

ensures a large number of cycles and a 

complete reopening in case of undervoltage. 

4. Frequency variator. 

5. PLC providing a possible evolution of 

operation. 



INDUSTRIAL 


PS-VBLB-10 

Public And Residential Industrial Lane 

Closing 

The PS-VBLB-10 Industrial Barrier is fitted with 

a high resistance 140mm diameter glass fibre 

arm capable to span up to 10m in width. The 

PS-VBLB-10 is capable of up to 10000 cycles 

per day while being resistant to wind gusts of 

160 km/ h. Protected with cataphoretic coating 

to provide maximum protection to external 

elements. 

PS 10 ANTI-VANDALISM ARM Ø 140 MM 

Type of barrier 




IP54 

Maximum 

passing width 

Arm 

Length 

3 000 000 cycles 

15,000 hours 

30 minutes 

Total 

weight 

Fixed support post 

or moving support is 

compulsory 

PS 10 - 00 - - 175 kg - 

PS 10 > 400 4,00 m 4,00 m 183 kg no 

PS 10 > 500 5,00 m 5,00 m 185 kg no 

PS 10 > 600 6,00 m 6,00 m 187 kg yes 

PS 10 > 700 7,00 m 7,00 m 189 kg yes 

PS 10 > 800 8,00 m 8,00 m 191 kg yes 

PS 10 > 900 9,00 m 9,00 m 193 kg yes 

PS 10 > 1000 10,00 m 10,00 m 195 kg yes 


• PVC sealed template frame + 4 bars 16 X 250 

mm + 8 bolts. 

• Sealed template frame for rotative barrier + 4 

bars ø 16 x 250 mm + stainless steel disc. 

• Fixed support post tube of 80 x 80 x 1200 mm. 

• Fixed support post with 230 kg magnetic 

suction. 

• Ajustable moving support from 800 to 1000 

mm + spring with shock absorber. 

• Lower folding skirt ø 14 mm of 3 to 6 m on 

stainless steel screws and junction (P3 Nylon). 

• Polyester paint of special color (RAL to be 

defined). 

• Signage with standard models ø 450, 650. 

• “High luminosity” LED flashing light. 

• Motion detector on a magnetic loop, infrared 

cell etc. 

• Local control equipments : fire brigade access 

control, push button box, etc. 

• Specific controls : tunnels, highways, SAS, etc. 

• Access controls : card readers, number code 

keyboard, etc. 

• In absence of U, automatic lifting arm < 7 m. 

Protected with cataphoretic coating to provide maximum 

protection to external elements. 

70 

www.parcsafe.com.au


HOUSING AND 

MAINTENANCE DOOR 

Steel sheet 3 mm protected with cataphoresis, blue paint RAL 5015, door 

equipped with a Ronis 405 lock. 

TOP COVER Steel sheet 2 mm protected with cataphoresis, white RAL 9010. 

PAINT Polyester powder baked at 250°, housing RAL 5015, top cover RAL 9010. 

ARM FROM 4 TO 10 

HALF SHELL 

COUNTERBALANCE 

EMERGENCY OPERATION 

Reinforced glass fibre and polyester arm ø 140 mm with reflecting bands (class I 

or class II). 

Galvanized steel of 8 mm for truncated tube in reinforced glass fibre of ø 140 mm. 

Compression spring from + bar, chain and sprocket (replaces the 

counterweight). 

Manual operation by 11 turns of the handle and an anti-restarting lock. 

Three-phase 0,55 kw motor driven by a frequency converter powered by a 

single-phase 230V. 

GEARED MOTOR 

Arm 

m 

Oval 

mm 

Drive 

KW 

Voltage 

A / 230V 

Speed 

tra / mm 

Variator 

proportion 

Operation time (sec) 

50 Hz mini/maxi 

≤ 4 m 140 0.55 2.9 1410 322 / 1 3.0 2.0 / 4.0 

GEARED MOTOR 


4 to 6 m 140 0.55 2.9 1410 460 / 1 6.0 4.0 / 8.0 

6 to 10 m 140 0.55 2.9 1410 640 / 1 8.0 6.0 / 9.0 

Housing with geared motor, counterbalance and a half shell. 

Isolating switch, frequency converter, control unit or PLC. 

Inductive sensors without contact for the arm adjustments. 

Anti-condensation thermostatic heating 230 V – 32 W. 

Glass fibre and polyester arm ø 140 mm with reflecting bands class I. 

Crank for manual emergency operations (with limited switches). 

A set of keys for the maintenance hatch. 

Installation, connection, implementation and maintenance manuals. 

Safety magnetic loop or free exit - infrared cell – adapted logics – signage etc. 


INSTALLATION 




• U 1000 RO 2V 3 x 2.5 mm2. 


• Green tube Ø 40 mm. 

• 5 pairs 9/10 telephone cable. 

3. Link with support: 


• Infrared cell, suction magnetic, etc. 







The template has to 

be levelled and must 

completely rest on the 

concrete foundation. 

Distance between each 

embedded shaft : 220 X 

220 mm. 



HIGH RESISTANT 


PS-VBLB-86 

Public, residential and Industrial Reinforced 

Protection 

The PS-VBLB-86 has been designed to provide 

areas that require higher levels of security a 

purpose built vehicle access barrier. 

The PS-VBLB-86 is designed for 10000 cycles per 

day and provides special “Anti-Shock” rotation and 

high shock resistance features for long term strength 

and reliability. 

PS-VBLB-86 STANDARD OVAL ARM 

Type 




Protection 

Maximum 

passing 

width 

Arm 

Length 

3 000 000 cycles 

15,000 hours 

60 minutes 

IP54 

Total 

weight 


or moving support 

is compulsory 

PS-VBLB-86 - 00 - - 155 kg - 

PS-VBLB-86 ≥ 300 3,00 m 3,00 

m 

PS-VBLB-86 > 400 4,00 m 4,00 

m 

PS-VBLB-86 > 500 5,00 m 5,00 

m 

PS-VBLB-86 > 600 6,00 m 6,00 

m 

167 kg no 

171 kg yes 

175 kg yes 

179 kg yes 


• PVC sealed template frame + 4 bars 16 X 250 mm + 8 

bolts. 

• Rotative sealed template frame + 4 bars ø 16 x 250 mm 

+ stainless steel disc + rotation kit. 

• Fixed support post tube of 80 x 80 x 1200 mm. 

• Fixed support post with 230 kg magnetic suction + ejector. 

• Ajustable moving support from 800 to 1000 mm + spring 

with shock absorber. 

• Lower rigid skirt ø 14 mm of 3 to 6 m on stainless steel 

screws and junction (P3 Nylon). 

• Rigid skirt on the top and folding skirt on the bottom part 

of the boom. 

• Articulated top and bottom grid type « GTH » (with arm 

175x75 mm). 

• Polyester paint of special color (RAL to be defined). 

• Signage with standard models. 

• Motion detector on a magnetic loop, infrared cell etc. 

• Local control equipment : fire brigade access control, push 

button box, etc. 

• Specific controls : tunnels, highways, SAS, etc. 

• Access control : card readers, number code keyboard, etc. 

• Solar supply possible, please contact us for further 

information. 

• Internal locking. 

• Anti-vandal pack. 

• Anti-vandal support post 

• Electromechanical locking in the support post. 

72 

www.parcsafe.com.au


HOUSING AND 

MAINTENANCE DOOR 

TOP COVER 

Steel sheet 3 mm protected with cataphoresis, blue paint RAL 5015, door 

equipped with a Ronis 405 lock. 

2 mm aluminium sheet with phosphate coating, with RAL 9010 paint. 


ARM FROM 3 TO 6 



Reinforced aluminium arm 180 x 118 mm, lacquered white + red reflecting 

bands. 

Compression spring + lever arm and oscillating spring shelf (replaces the 

counterweight). 


Three-phase 0,25 kw - 230V (Δ) with motor driven by a frequency converter 

Bevel gears speed reducer 

GEARED MOTOR 

Arm 

m 

Oval 

mm 

Drive 

KW 

Voltage 

A / 230V 


mini/maxi 

From 3 to 4 m 180 x 118 0,25 1,5 2.0 / 4.0 

From 4 to 5 m 180 x 118 0,25 1,5 4.0 / 8.0 

STANDARD EQUIPMENT 


From 5 to 6 m 180 x 118 0,25 1,5 6.0 / 9.0 

Housing with geared motor, counterbalance and a half shell of arm support. 

Isolating switch, frequency converter, PLC. 


Anti-condensation heating 230 V – 32 W. 

A set of keys for the maintenance door. 


Reinforced aluminium arm 180 x 118 + reflecting bands class 1. 

Aluminium housing - Arm 135 x 93mm - Safety magnetic loop free exit - 

infrared cell – adapted logics – articulated arm - in absence of U, automatic 

lifting arm ≤ 6m with arm 180x118mm 

and ≤7,5m with arm 135x93mm, etc… 





• • U 1000 RO 2V 3 x 2.5 mm2 













INSTALLATION 

The template has to be 

levelled and must completely 

rest on the concrete 

foundation. Distance 

between each embedded 

shaft : 220 X 220 mm. 




WITH REINFORCED 

PROTECTION 

PS-VBLB-86HP 

The PS-VBLB-86HP provide reinforced protection with 

a specially designed arm with full height skirt to height 

of 2000mm. Capable to 5000 cycles per day and up 

to 4000mm in width the PS-VBLB-86HP has the standard 

Anti Shock rotation features while still being protected with 

cataphoretic coating for corrosion resistance. 


HOUSING AND DOOR 

Steel sheet 3 mm protected with cataphoresis, blue paint RAL 5015, door equipped 

with a Ronis 405 lock. 

TOP COVER Steel sheet 2 mm protected with cataphoresis, white paint RAL 9010. 


ARM 

RIGID SKIRT 

FOLDING SKIRT 

HALF SHELL 



High resistant aluminium, rectangular profiled arm, lacquered white (RAL 9010) of 

175 x 75 mm, 2 mm thick with reflecting bands, class I or II. 

Rigid aluminium skirt in white RAL 9010 with 30 x 20 mm frame and bars of ø 20 mm. 

Aluminium folding skirt with bars of ø 20 mm in red (RAL 3020) and white (RAL 

9010), height 780 mm. 

Galvanized steel of 8 mm + RAL 9010 paint for the aluminium arm 175 x 75 mm. 

Compression spring from + bar, chain and sprocket (replaces the counterweight). 


Three-phase 0,55 kw - 230V (Δ) with brake motor driven by a frequency converter. 

Double wheel converter and worm screw, lubricated for life. 

GEARED MOTOR 

STANDARD EQUIPMENT 


74 

Arm 

m 

Drive 

KW 

Speed 

trs/mm 


Variator 

proportion 


50 Hz mini/maxi 

≤ 3,00 m 0,55 1410 640 / 1 8,0 4,0 / 9,0 

3,50 m 0,55 1410 640 / 1 8,0 4,0 / 9,0 

4,00 m 0,55 1410 640 / 1 8,0 4,0 / 9,0 

Barrier Housing with geared motor, counterbalance and a half shell of arm support. 

Isolating switch, frequency converter, control unit or PLC. 


Anti-condensation thermostatic heating 230 V – 32 W. 

A set of keys for the maintenance door. 


Reinforced aluminium arm 175 x 75 

Rigid skirt on the top and folding skirt on the bottom part of the arm + “wolf-tooth” gear. 

Safety magnetic loop - infrared cell – adapted logics – signage - LED flashing lights 

integrated in the arm on both sides etc.

PS-VBLB-86HP HIGH RESISTANCE ARM WITH 

Type 

FULL HEIGHT SKIRT from 2 to 4 m 

Maximum 

passing 

width 

Arm 

Length 

Total 

weight 


or moving support 

is compulsory 

PS-VBLB-86HP - 00 - - 175 kg yes 

PS-VBLB-86HP - 200 2,00 m 2,00 m 187,5 kg yes 

PS-VBLB-86HP - 300 3,00 m 3,00 m 200 kg yes 




• Fixed support post tube of 80 x 80 x 1200 mm 

• with or without suction. 

• PVC sealed template frame +4 bars 16 X 250 mm. 

• “Anti-shock” rotative sealed template frame in 

• stainless steel. 

• Polyester paint of special color (RAL to be defined). 

• LED light mounted in the arm. 

• Magnetic security loop, motion detector… 

• Local control equipment : fire brigade access 

• control, push button box, etc. 

• Specific unit on command. 




Protection 

3 000 000 cycles 

15,000 hours 

30 minutes 

IP54 

Reinforced protection with a specially 

designed arm. 




• • U 1000 RO 2V 3 x 2.5 mm2 













INSTALLATION 


The template has to be 

levelled and must completely 

rest on the concrete 

foundation. Distance 

between each embedded 

shaft : 220 X 220 mm. 



PS-VBLB- Various 



BOLLARD - 

RETRACTABLE 



Bollard - Retractable 

The Parcsafe retractable PS-VBLB- bollards Variousare provided with 

either integrated or remote hydraulic motorisation 

and are offered with crash testing results. 

The Parcsafe retractable bollards are provided with either 

integrated or remote hydraulic motorisation and are offered with 

crash testing results. 

All bollard are provided with a minimum of 250mm 

diameter and height of 600mm. Lowest crash testing 

offered is 1t vehicle 50km/hat 50km/h 

All bollard are provided with a minimum of 250mm diameter and 

height of 600mm. Lowest crash testing offered is 1t vehicle at 

1. Head of Bollard with optional 

pressure sensor 

2. Fashing LED strip 

1 

3. Mobile Housing -250mm - 

325mm 

4. Top cover 

5. Guiding device 

6. Buried casing, section: 

850x500mm, height: 

1720mm (Varies depending 

on height required above 

ground) 

4 

3 

2 

5 

1 - Head of Bollard with 

optional pressure sensor 

2 - Fashing LED strip 

3 - Mobile Housing - 

250mm - 325mm 

4 - Top cover 

5 - Guiding device 

6 - Buried casing, 

section: 850x500mm 

height: 1720mm (Varies 

depending on height 

required above ground) 

6 

CRASH TEST 

1 

50km/h 

80km/h 

76 


W - parcsafe.com.au | E - enquiries@parcsafe.com.au | Address - Unit 2 / 18 Success St Acacia Ridge QLD 4110

.com.au 

Product Code Dimensions Floor plate 

dimensions 


Power 

Requirements 

Power 

Consumption 

Power 

Type 

Resistance 

Operating 

time 

PS-VBLB- 

RB600.50 

250mm D x 330 mm x 450mm 240 V 700 W Integrated or 

600mm H 

integrated remote hydraulics 

Power 

Floor plate 

Power Power 

Requirements 

x 430mm 240 V 1500 W Remote 

Resistance 

Operating 

dimensions 

Consumption Type 

time 

250mm D x 430 

600mm H 

Integrated or 106,000 J Hydraulics 

330 mm x 450 

700 W 

240 V 

remote 1.1T @ 4 – 6 sec 

mm 

integrated 

hydraulics 50km/h 

250mm D x 430 x 430mm 240 V 1500 W Remote 

432,000 J 

900mm 

Remote 

Hydraulics 

430 x 430mm 240 V 1500 W 

2 – 4 sec 

Hydraulic 

ct Code Dimensions 

PS-VBLB- 

LB- 

RB600.80 

250mm D x 

.50 600mm H 

LB- 

.80 

LB- 

.50 

PS-VBLB- 

RB900.50 250mm D x 

600mm H 

PS-VBLB- 250mm D x 

RB900.80 900mm 

1.75t @ 80 

km/h 

250mm D x 430 x 430mm 240 Remote V 15001,850,000 W JRemote 

430 900mm x 430mm 240V 1500W 

Hydraulics 7t @ 80 km/h Hydraulics 4 – 6 Sec 

106,000 J 1.1T 

@ 50km/h 

432,000 J 1.75t 

@ 80 km/h 

1,850,000 J 7t @ 

80 km/h 

864,200 J 3T @ 

80 KM/h 

4 – 6 sec 

2 – 4 sec 

4 – 6 Sec 

4 – 6 sec 

LB- 

.80 

LB- 

0.80 

PS-VBLB- 

250mm D x 

900mm 

RB1000.80 

300mm D x 

1000mm 

430 300mm x 430mm D x 1030 240V x 5301500W 

+ 

1000mm 380 x 580mm 

1030 x 530 + 380 

x 580mm 

415V 

3200W 

864,200 J 

415V 

Remote 

3200W 3T @ 80 Intergrate 4 – 6 sec or 

Hydraulics 

KM/h remote hydraulics 

Intergrate or 

remote 

hydraulics 

1,850,000 J 

Single Test 

7.5t @80 kmh 

2 – 6 sec 

adjustable 

1,850,000 J 

Single Test 7.5t 

@80 kmh 

2 – 6 sec 

adjustable 

LB- 

.80 

LB- 

.50 

LB- 

.80 

LB- 

0.80 

Product Code MCBF 

MTBF MTTR In event of Finish IP Components LED Lighting - 

MCBF 

LED 

(number MTBF of cycles) MTTR (hours) In event (minutes) of 

power failureIP 

ct Code (number of 

Finish 

Lighting - 

Option 

(hours) (minutes) power failure 

Components 

cycles) 

Option 

PS-VBLB- 3,000,000 25,000 30 minRAL 7016/ Gravity RAL 7016/Stainless IP66 / IP67 YES 

LB- 

RB600.50 3,000,000 25,000 30 min Gravity Descent Stainless Descent IP66 / IP67 Option YES 

.50 

Option 

PS-VBLB- 3,000,000 25,000 30 minRAL 3001 Gravity / 

RAL 3001 / 

RB600.80 

3,000,000 25,000 30 min Gravity Descent Stainless 

Descent 

IP66 / IP67 

Stainless 

YES 

Option 

Option 

RAL 7016 / 

PS-VBLB- 

3,000,000 25,000 

3,000,000 

30 min 

25,000 

Gravity Descent 

30 min 

Stainless 

Gravity 

IP66 / IP67 

RAL 7016 

YES 

/ 

RB900.50 

Option Descent Stainless Option 

RAL 3001 / 

PS-VBLB- 3,000,000 25,000 3,000,00030 min 25,000 Gravity Descent 30 minStainless 

Gravity IP66 / IP67 RAL 3001 YES / 

RB900.80 

Steel Descent Stainless Steel 

Micro 

Locks in blasted 

PS-VBLB- 3,000,000 25,000 3,000,00030 min 25,000 30 min Locks in IP66 / IP67 Micro blasted YES 

position Stainless 

RB1000.80 

Steel liner 

position Stainless Steel liner 

IP66 / IP67 

IP66 / IP67 

IP66 / IP67 

IP66 / IP67 

YES 

YES 

YES 

YES 


1 Loop cable 

INSTALLATION 

INSTALLATION 

2 Sleeve for motor cable and 

1. Loop control cable 

3 Magnetic security loops 

2. Sleeve for motor cable 

and control 

4 Totem 4 

1 

3. Magnetic security loops 

4. Totem 

2 

3 

3 

1 

2 



FIXED BOLLARD 

CUBE 

PS-VBLB-Cube 

Fixed Bollard concealed under Special 

Design Cover 

The CUBE is an urban obstacle protecting 

public spaces and users from vehicle attacks 

while being invisible. CUBE provides concealed 

proven crash tested bollard within an innovative 

eco-active material while providing aesthetic 

design suited for public space. 


FIXED BOLLARD 

STRUCTURE 

SHELL STRUCTURE 

DIMENSIONS 

SECURITY BY DESIGN 

Steel sheet of Ø 250 mm, cataphoresis treatment and RAL 7021 epoxy powder 

painting, optional custom colours of internal bollard 

Innovative eco-active material: a new-generation synthetic resin; it contributes to the 

health of users by purifying the surrounding environment. It is antibacterial, selfcleaning 

and eliminates toxic chemicals by simple contact. Also available in stone. 

Shell: 650mm - 1050mm Height and 500mm Square. 

Bollard: Ø 250 mm - H - 600 mm or 1000 mm 

This bollard is part of a Security by Design approach, to engaged professional 

expertise that is consistent in taking into account all the existing threats, risks and 

constraints in both architectural and functional aspects of a site, while advocating 

efficient security solutions. The CUBE Bollard has been crash tested to meet 723 KJ 

Rating with a dual test of 1.5t vehicle at 50 km/h and up to 7.5t vehicle at 80 km/h. 

PROPERTIES OF THE CUBE 

Fire Retardant - Fire resistance Euroclass B s1 d0 to comply with the 

standard EN 13501-1:2003. 

Standards – Certified ISO 22197 Air purification, ISO 27447 

Antibacterial, ISO 10678 chemical elimination and ISO 27 448 Selfcleaning. 

Resistance to Extreme Environments - Thermal resistance from -20 ° up 

to 50 °: suitable for thermal shocks without change of the material. 

Environmental - Does not contain Bisphenol A or any of the 161 

substances listed in the SVHC. 100% recyclable. 

Impact Resistance guaranteed by 324g ball test dropped at 1.9m; 

resistance 240-280 N /mm3. 

Burn Resistance - Resistance to cigarette burns in accordance with ISO 

19712- 2: slight changes in degree of gloss only from certain angles. 

AIR PURIFICATION 

When gases come into contact with 

Eco Active surface , it gives rise to 

chemical degradation reaction, with 

the appearance of harmless products 

such as mineral salts and water. 

1m2 of material purifies the air 

breath of 6.5 people during 12 

month period. 

The Eco Active material can eliminate 

dangerous bacteria such as E.Coli or 

S. Aureus up to 117% more than any 

other material. Non- proliferation of 

bacteria according to ISO 846/ASTM 

G22. 

78 

www.parcsafe.com.au

Product Code Finish Overall Size 

Dimensions rating steel frame 

for bollard 

Induction 

Charging 

surface 

Certified 

500mm x 

CUBE Depolluting and 500mm x 

Product Code Finish Antibacterial Overall resin Size 650mm Terminal H 

Dimensions 

CUBE 

CUBE-NS 

Certified 500mm x 500mm 250mm x D x 

Depolluting Natural and Stone500mm x 500mm 600mm x H 

Antibacterial 650mm H650mm H 

resin 

250mm D x 

Resistance 600mm H 

rating 

723,000 J 

7.5T at 50 

Optional km / h 

Additional steel 

frame for bollard 

Optional 

Induction 

Charging 

Yes Yes 1.92m2 

Depolluting 

surface 

Optional - 

LED Lighting 

723,000 J 

723,000 250mm J D x Yes 7.5T at 50 Yes 1.92m2 Yes 

7.5T at 50 

Yes Yes 

600mm H km / h 

km / h 

CUBE-NS Natural Stone 500mm x 250mm D x 

Certified 

500mm x 

500mm 

600mm 

x 

H 

CUBE-XL Depolluting and 650mm H500mm x 

Antibacterial resin 1050mm H 

723,000 J 

7.5T 250mm at 50 D x 

km 1000mm / h H 

Yes Yes 

723,000 J 

Yes 

7.5T at 50 Yes Yes 2.35m2 

km / h 

CUBE-XL 

CUBE-XLNS 

Certified 

Depolluting and 

Antibacterial 

resin 

500mm x 

500mm x 

1050mm H 

CUBE-XLNS Natural Stone 500mm x 

500mm x 

1050mm H 

Certified 

CUBE-XLH 

Natural Stone 

250mm D x 

1000mm H 

500mm x 

500mm x 

1050mm H 

250mm D x 

1000mm H 

723,000 J 

7.5T at 50 

km / h 

250mm D x 

1000mm H 

723,000 J 

7.5T at 50 

km / h 

500mm x 

250mm D x 

Certified Depolluting and 500mm x 500mm 250mm x D x 1,850,000 

1000mm H 

Depolluting Antibacterial and 500mm resin x 1050mm 1000mm H H J 7.5T at 50 

Antibacterial 

resin 

1050mm H 

km / h 

500mm x 

CUBE-XLHNS Natural Stone 500mm x 250mm D x 

CUBE -XLHNS Natural Stone 

500mm x 

500mm 

1000mm 

x 

H 

1050mm 1050mm H H 

1,850,000 250mm D x 

J 1000mm 7.5T at 50 H 

km / h 

Yes Yes 2.35m2 Yes 

723,000 J 

7.5T at 50 

km / h 

Yes 

Yes 

Yes Yes Yes 

1,850,000 J 

Yes 

7.5T at 50 

km / h 

Yes Yes 2.35m2 Yes Yes 2.35m2 

1,850,000 J 

Yes 7.5T at 50 Yes Yes 

Yes Yes 

km / h 


1000 

500 

330 Concrete Foundation 

80 Ground Finish (pavers, asphalt, tiles or similar) 



1600 

600 

Impact Direction 

Note: all dimension in mm 


W - parcsafe.com.au | E - enquiries@parcsafe.com.au | Address - Unit 2 / 18 Success St Acacia Ridge


FIXED BOLLARD - 

STYLEMASTER 

PS-VBLB-Stylemaster 

Fixed bollard concealed under special 

design cover 

The Stylemaster is designed to take into account the 

existing threats and risks of a site while allowing for 

the architectural and functional aspect of a site. 

STYLEMASTER is a shockproof bollard that fits 

perfectly within an innovative material that allows 

the combination of safety and improvements to the 

environment. 


FIXED BOLLARD 

STRUCTURE 

SHELL STRUCTURE 

DIMENSIONS 

SECURITY BY DESIGN 

Steel sheet of Ø 250 mm, cataphoresis treatment and RAL 7021 epoxy powder 

painting, optional custom colours of internal bollard 

Innovative eco-active material: a new-generation synthetic resin; it contributes to 

the health of users by purifying the surrounding environment. It is antibacterial, selfcleaning 

and eliminates toxic chemicals by simple contact. Also available in stone. 

Shell: Height 730 - 1250mm with 396mm Diameter. 

Bollard: Ø 250 mm - H - 600 mm 

This bollard is part of a Security by Design approach, to engage professional expertise 

that is consistent in taking into account all the existing threats, risks and constraints in 

both architectural and functional aspects of a site, while advocating efficient security 

solutions. The Stylemaster Bollard has been crash tested to meet 432 KJ Rating with a 

dual test of 1.5t vehicle at 50 km/h and up to 7.5t vehicle at 80 km/h. 

Product Code Finish Overall Size Terminal 

Dimensions 

Resistance rating 

Additional steel 

frame for bollard 

Induction 

Charging 

Depolluting 

surface 

Mini 

Stylemaster 

Certified Depolluting 

and Antibacterial 

resin 

730mm H 

x 395mm 

Diameter 

250mm D x 

600mm H 

432,000 J 7.5T 

vehicle at 50 KM/h 

Yes Yes 1.0m2 

Style Master 

Certified Depolluting 

and Antibacterial 

resin 

1250mm H 

x 395mm 

Diameter 

250mm D x 

600mm H 

432,000 J 7.5T 

vehicle at 50 KM/h 

Yes Yes 1.0m2 

80 

www.parcsafe.com.au

CUBE -XLHNS 

Natural Stone 

500mm x 

500mm x 

1050mm H 

250mm D x 

1000mm H 

7.5T at 50 

km / h 

Yes 

Yes 

1000 

500 





1600 

600 

Note: all dimension in mm 

Impact Direction 


W - parcsafe.com.au | E - enquiries@parcsafe.com.au | Address - Unit 2 / 18 Success St Acacia Ridge 

© 2020 Parcsafe Pty Ltd. 


82 

www.parcsafe.com.au


VEHICLE ACCESS

84 

www.parcsafe.com.au

CARPARK FITOUT AND DESIGN 

CARPARK FITOUT & DESIGN 

CUSTOM TURNKEY SOLUTIONS TO 

IMPROVE THE PARKING EXPERIENCE 

PARCsafe can provide a comprehensive range 

of products to give your carpark a complete 

refurbishment. Our range of fixed bollards, wheel 

stops, speed humps, corner protectors, height 

bars and mirrors plus signage can suit almost any 

application. 

May be the floor needs repainting or concrete repair, 

Parcsafe can provide a complete assessment of what 

will be required to get your carpark to be the soughtafter 

location for parking, charging, storage, green 

parking, facility signage, wayfinding and the list goes on. 

We will assess your current target market and analyse 

what will deliver you best access, higher value for your 

parking and commercial real estate assets. 





Wheel Stop 

Wheel Stop 

Economy Rubber 

Rubber wheel stop 



WHEEL STOP 



Recycled rubber 

Weather resistant 

Fast installation 

UV resistant 

• Complies with AS2890.1-2004 

• Solid moulded construction 

• Won’t chip or corrode 

• Supplied with all fixings 

One piece moulded rubber wheel stop with 

visual inserts. Made from recycled rubber it is 


the most practical wheel stop on the market. 


One piece moulded rubber wheel stop with visual inserts. Made from 

recycled It is rubber easy it is to the install most practical and wheel does stop on not the market. require It is easy 


to install and does not require additional lifting equipment. be 

additional lifting equipment. Designed to be 

• Supplied with all durable, fixings it won’t crack or chip. 

durable, it won’t crack or chip. 

One piece moulded rubber wheel stop with visual inserts. Made from 

Specification Guide 

Specifications 

Application 

Material 

Fixings 

Colour 

Specification • Complies with Guide AS2890.1-2004 




recycled rubber it is the most practical wheel stop on the market. It is easy 

to install and does not require additional lifting equipment. Designed to be 

durable, it won’t crack or chip. 

Install PARCSAFE Wheel Stops (insert code) to all car park areas in accordance 

with manufacturer’s recommendations. Available from Parcsafe Pty 

Ltd by contact enquiries@parcsafe.com.au 


SPECIFICATIONS GUIDE 

Application Bitumen or concrete 

Install Material PARCSAFE Recycled Wheel rubber Stops (insert code) to all 

car Fixings park areas 3 in x fixings accordance with manufacturer’s 

Colour 

Solid black with yellow stripes 

Install PARCSAFE Wheel recommendations. Stops (insert code) Available to all car from park Parcsafe areas in accordance 

with manufacturer’s contact recommendations. enquiries@parcsafe.com.au 

Available from Parcsafe 

Pty Ltd by 

Pty 

Ltd by contact enquiries@parcsafe.com.au 

SPECIFICATIONS 

Code Description A 

length 

(mm) 

Application: Bitumen or concrete 

B 

width 

(mm) 

PS-CF-RWS Rubber wheel stop 1650 160 

Material: Bitumen or Recycled concrete rubber 


Fixings: 3 x fixings 

3 x fixings 

Colour: Solid black with yellow stripes 

Solid black with yellow stripes 

PS-CF-RWS-AF Wheel stop spike for asphalt applications 1650 160 

Code Description A B 

W - parcsafe.com.au | E - enquiries@parcsafe.com.au | Address - Unit 2 / 18 Success St Acacia Ridge length QLD 4110 width 

(mm) (mm) 



Product Code Description A 

B 

length (mm) width (mm) 




.au | E - enquiries@parcsafe.com.au | Address - Unit 2 / 18 Success St Acacia Ridge QLD 4110 

86 

© 2020 Parcsafe Pty Ltd. www.parcsafe.com.au




Wheel Stop 

Wheel Stop 

WHEEL STOP 

Concrete wheel stop 

Concrete wheel stop wheel stop 


• Complies Moulded with in AS2890.1-2004 one piece and reinforced with 

• Longer Durability 

• Longer Durability internal steel rods for enduring strength and 

• Corrosion and rot resistant 

• Corrosion and rot • Supplied resistant durability. with all fixings 


Moulded • Complies in one piece and with reinforced AS2890.1-2004 

with internal steel rods for enduring 

strength and durability. 

Moulded in one piece and 

• 

reinforced 

Longer Durability 

with internal steel rods for enduring 

strength and durability. 

• Corrosion and rot resistant 




UV resistant 


Install ParcsafeWheel Stops to all car park areas in accordance with manufacturer’s 

recommendations. Available from: Parcsafe Pty Ltd by contacting 

enquiries@parcsafe.com.au 

Specification Specifications Guide 

Install ParcsafeWheel Application Stops to all car Bitumen park areas or concrete in accordance with manufacturer’s 

recommendations. Material Available 

Reinforced 

from: Parcsafe 

concrete 

Pty Ltd by contacting 

Fixings 

3 x fixings 


Colour 

Grey 



Application 

Material 

Fixings 

Colour 


Install ParcsafeWheel Stops to all car park areas in 

accordance with manufacturer’s recommendations. 

Available from: Parcsafe Pty Ltd by contacting enquiries@ 



Bitumen or concrete 

Material: Reinforced concrete 

Reinforced concrete 

Fixings: 3 x fixings 

3 x fixings 

Grey 

Colour: Grey 


length 

(mm) 

B 

width 

(mm) 

PS-CF-CWS Concrete wheel stop 1650 190 


length 

(mm) 

B 

width 

(mm) 



W - parcsafe.com.au | E - enquiries@parcsafe.com.au | Address - Unit 2 / 18 Success St Acacia Ridge QLD 4110 



length (mm) 

B 

width (mm) 


PS-RFBTI-XX Fold remote operated in Powdercoated in red, Suplied with remote control panel 600 80 

u | E - enquiries@parcsafe.com.au | Address - Unit 2 / 18 Success St Acacia Ridge QLD 4110 



Round Profile 

Galvanised steel 



Bollards 

Surface Mount 

Galvansied, Surface Powdercoated Mount and Stainless Steel 

Galvansied, Powdercoated and Stainless 

Steel 

Bollards 

• Bollards are supplied with all fixings for concrete installation 

PARCSAFE fixed surface mount bollards are designed for traffic control 

situations or property and asset protection. Manufactured from heavy wall 

Galvansied, Powdercoated PARCSAFE 

mild steel tube with and fixed 

fully Stainless surface 

welded base plates. Steel mount bollards 

are designed for traffic control situations or 

property and asset protection. Manufactured 


from heavy wall mild steel tube with fully 

• Bollards are supplied Parcsafe 

welded 

surface with base 

mounted all fixings plates. 

bollard are for design concrete to provide safe installation 

and secure 

areas around critical infrastructure or pedestrian gathering points. These 

mild steel tube with fully Specifications welded base plates. 

Application 

Mount to hard surfaces 

Galvanised, Powdercoated (Safety Yellow), Stainless Steel 

Product Code A B C D 

Base Plate Finishes 

areas around critical infrastructure or pedestrian gathering points. These 

length Diameter Fixings Wall Dimension Available 

Steel. (mm) (mm) Required Thickness 

product are available as Hot-Dipped Galvanised, Powdercoated or in 

(mm) 


Powder coated (optional) 



Surface Mount 

BOLLARDS 

PARCSAFE fixed surface product • mount are Bollards available bollards are as Hot-Dipped are supplied designed Galvanised, with for all Powdercoated traffic fixings control for in concrete 

Stainless Steel 

situations or property and asset installation protection. Manufactured from heavy wall 


Parcsafe surface mounted bollard are design to provide 

safe and secure areas around critical infrastructure or 

Parcsafe surface mounted pedestrian bollard gathering are design points. to provide These safe product and secure are available 

as Hot-Dipped Galvanised, Powdercoated or in Stainless 



Application 

Finish 

SPECIFICATIONS Finish 

GUIDE 


PC- BC-9150X 1200 90 4 5 190mm PC, HGP, SS 

PC- BC-14150X 1200 140 4 5 240mm PC, HGP, SS 

Application: Mount to hard surfaces 

PC-BC-165180X 1200 165 6 5 300mm PC, HGP, SS 

Mount to hard surfaces 

Finish: PC- BC-20150X Galvanised, 1200 200 Powdercoated 6 5 (Safety 350mm Yellow), 

PC, HGP, SS 

Galvanised, Stainless Steel Powdercoated (Safety Yellow), Stainless Steel 

PC – Powdercoated – Standard is Safety Yellow 

HDG – Hot-Dipped Galvanised 

SS – Stainless Steel in both Grade 304 and 316 

Product Code 

Surface mounted bollards with diameter larger than 200mm can be 

provided in various designs and heights. these are also available with a 

impact rating if required. Contact enquiries@parcsafe.com.au for further 

information. 

Product Code A B C D 

Base Plate Finishes 

length Diameter Fixings Wall Dimension Available 


(mm) (mm) Required Thickness 


(mm) 

A 

length (mm) 

B PC- BC-9150X C 1200 90 D4 5 Base 190mm Plate PC, HGP, Finishes SS 

height (mm) width (mm) Wall Thickness Dimension Available 

PC- BC-14150X 1200 140 (mm) 4 5 240mm PC, HGP, SS 

PC- BC-9150X 1200 90 PC-BC-165180X4 1200 165 5 6 5 190mm 300mm PC, HGP, PC, HGP, SS SS 

PC- BC-14150X 1200 140 PC- BC-20150X4 1200 200 5 6 5 240mm 350mm PC, HGP, PC, HGP, SS SS 


PS-CF-HDSH-YE 1200 165 6 5 


300mm PC, HGP, SS 

PC- BC-20150X 1200 200 HDG – Hot-Dipped 6 Galvanised5 350mm PC, HGP, SS 

Powder coated (optional) 

SS – Stainless Steel in both Grade 304 and 316 


SS – Stainless Steel - available in grade 304 and 316 


Surface mounted bollards with diameter larger than 200mm can be 

Surface mounted bollards with diameter larger than 200mm can be provided in various designs and heights. these are also available with a 

provided in various designs and heights. these are also available with a 

impact rating if required. Contact enquiries@parcsafe.com.au for further information. 

impact rating if required. Contact enquiries@parcsafe.com.au for further 

88 

information. 


1



Bollards 

BOLLARDS 


Cast In 

“ Galvanised, Cast InPowdercoated and Stainless Steel 

Galvanised, Powdercoated and Stainless 

Steel 

Parcsafe cast in fixed bollards are designed for traffic control situations 

or property and asset protection. Manufactured from heavy wall mild 

Bollards 

steel tube. Suitable for installation into any asphalt or any soft surface 

Cast In 

where Parcsafe a concrete footing cast is in necessary. fixed bollards are designed for 

traffic control situations or property and asset 

Specification protection. Manufactured Guide from heavy wall mild 

“Parcsafe steel specialises tube. Suitable in providing solution for installation for your carparking into needs. any If 

“ Galvanised, Powdercoated and Stainless Steel 

there is a bollard dimension or design you require not listed below, please 

asphalt or any soft surface where a concrete 

contact us by email at enquiries@parcsafe.com.au for assistance 

footing is necessary. 

Fixed Cast in bollard with diameter larger than 


Parcsafe cast in fixed bollards 

Application 

200mm are can designed 

Cast 

be 

in 

provided for traffic 

to various surfaces 

in control various situations designs and 

or property and asset Finish protection. heights.These Manufactured Galvanised, are also Powdercoated from available heavy in Safety wall with Yellow, mild an Stainless impact Steel 

steel tube. Suitable for installation crash rating into if any required. asphalt Contact or any soft enquiries@ surface 

where a concrete footing parcsafe.com.au is necessary. for further information. 

Round Profile 

Hot-Dipped Galvanised 




Custom powdercoated 

colours available 

SPECIFICATIONS Product Code A B 

C GUIDE 

D 

length 

(mm) 

Length from 

Surface (mm) 

Diameter 

(mm) 

Wall 

Thickness 

(mm) 



SS - Stainless Steel - available in grade 304 and 316 

Finishes 

Available 

Parcsafe specialises in providing solution for your carparking 

providing 

“Parcsafe specialises 

PC- BC-9150Xneeds. solution 

1500 1200 If there for your is 90a carparking bollard 5 dimension needs. If 

PC, HGP, or SS design 

there is a bollard dimension you PC- BC-14150X require or design 

1500 not 1200 

you listed require below, 140 

not please listed 

5 

below, contact PC, 

please 

HGP, us by SS email at 

contact us by email at PC-BC-165180X enquiries@parcsafe.com.au 1800 1200 165 for for assistance. 

5 PC, HGP, SS 


Application 

Finish 


PC- BC-20150X 1800 1200 200 5 PC, HGP, SS 

Application: Cast in to various surfaces 

Cast Finish: to Galvanised, various surfaces Powdercoated in Safety Yellow, 


Galvanised, Powdercoated in Safety Yellow, Stainless Steel 

Fixed Cast in bollard with diameter larger than 200mm can be provided 

in various designs and heights.These are also available with an impact 

crash rating if required. Contact enquiries@parcsafe.com.au for further 

information. 




Product Code A 

B Product Code A CB 

C D D 

Finishes 

length (mm) Length from Surface (mm) length Diameter Length from (mm) Diameter Wall Thickness Wall (mm) Available 

(mm) Surface (mm) (mm) 

Thickness 

PC- BC-9150X 1500 1200 90 5 (mm) 

PC, HGP, SS 

PC- BC-14150X 1500 1200 140 5 PC, HGP, SS 

PC- BC-9150X 1500 1200 90 5 PC, HGP, SS 

PC-BC-165180X 1800 1200 

PC- BC-14150X 1500 

165 

1200 140 

5 

5 

PC, HGP, SS 

PC, HGP, SS 

PC- BC-20150X 1800 1200 200 5 PC, HGP, SS 

PC-BC-165180X 1800 1200 165 5 PC, HGP, SS 

1 


PC – Powdercoated Custom powdercoated 

– Standard is Safety Yellow 

HDG – colours Hot-Dipped available Galvanised 

PC- BC-20150X 1800 1200 200 5 PC, HGP, SS 



SS - Stainless Steel - available in grade 304 and 316 



Rectangle profile 




Bollards 

Fold Down Steel Bollards 

Fold Fold down access Down barrier Steel Bollards 

Fold down access barrier 

• Stands 1000mm tall when locked 

• Flat on ground 80mm high 

• Includes fixings and key 

• Broad face of 100mm 

ordered separately. 

• Stands 1000mm tall when locked 

• Stands 1000mm 

Specification 

tall 

• 

when 

Flat locked 

ground Guide 80mm high 

• Flat on ground 80mm 

• Includes 

high 

fixings and key 

• Includes fixings and 

• Broad 

key 

face of 100mm 

• Broad face of 100mm 

Parcsafe Fold Down bollards provide the added security to your reserved 

parking spaces. This are provided with keys and bolt down kits 

Available in Hot Dipped Galvanised Finish or Powdercoated. Remote 

operated unit are available upon request. The dimension for remote 

operate units will vary from manual adjusted unit. Picture below 

The PARCSAFE fold down bollard has been designed for vehicle 

SPECIFICATIONS Specifications 

GUIDE 

access control and parking 

Fixing 

space protection. 

Masonry anchors 

Reflective 

(supplied) 

sign face 

ordered separately. Locking 

Material 

Finish 

Padlock (supplied) 


Galvanised, Powdercoated (standard Safety Yellow) 


Custom Powdercoated 

option available 

Fixing 


BOLLARDS 


Bollards 

The PARCSAFE fold down bollard has been 

Fold Down Steel designed Bollards for vehicle access control and parking 

The PARCSAFE fold down bollard has been designed for vehicle 

Fold down access barrier space protection. Reflective sign face ordered 

access control and parking space protection. Reflective sign face 

separately. 


Parcsafe Fold Down bollards provide the added security 

to your reserved parking spaces. This are provided with 

keys and bolt down kits. 

Available in Hot Dipped Galvanised Finish or 

Code Description A B C D 

Powdercoated. Remote operated unit are available upon 

height height front side 

up down width width 

Parcsafe Fold Down bollards request. provide The dimension the added for security remote 

(mm) to your operate 

(mm) reserved 

parking spaces. from PS- This MFBTS manual are - XX provided Fold adjusted down, key with lockable keys unit. bollard and 1000 bolt down 80 kits 100 50 

units will vary 

(mm) (mm) 

with reflective red/ 

Available in Hot Dipped Galvanised yellow Finish stripes on or sign Powdercoated. face 

Remote 

operated unit are available SPECIFICATIONS 

PS-RFBTI-XX upon request. Fold remote operated The dimension in Powdercoated 

in red, Suplied with remote 

600 for remote 

80 550 50 

operate units will vary from manual control adjusted panel unit. Picture below 

Fixing: Masonry anchors (supplied) 


Locking: Padlock (supplied) 

Masonry anchors (supplied) 

Material: Galvanised steel 

Locking 

Padlock (supplied) 

Material 

Galvanised Finish: Galvanised, steel Powdercoated (standard Safety 

Finish 

Galvanised, Yellow) Powdercoated (standard Safety Yellow) 






(mm) (mm) (mm) (mm) 1 

PS- MFBTS - XX Fold down, key lockable bollard 1000 80 100 50 


Product Code Description A yellow stripes on Bsign face 

C 

D 

height up (mm) height down (mm) 

PS-RFBTI-XX Fold remote operated in Powdercoated 

600 

front width (mm) 

80 550 

side width (mm) 

50 


Fold down, key lockable bollard 

control panel 

PS- MFBTS Fast - XX installationwith 

reflective red/yellow stripes 1000 80 100 50 

on sign face 

Fold remote operated in 

PS-RFBTI-XX Custom Powdercoated Powdercoated in red, Suplied with 

option availableremote control panel 

600 80 550 50 

90 

www.parcsafe.com.au




Corner Guards 

CORNER GUARDS 

Corner Guards 

Protective Corner Guards 

Rubber Protective corner guardCorner Guards 

Protective Corner Rubber Guards corner guard 

Rubber corner guard 

• Helps identify columns or obstruction in low light areas 

• Supplied with fixing holes 

Parcsafe corner guards are designed to 

Parcsafe 

prevent 

corner guards 

damage 

are designed 

to both 

to prevent 

vehicles 

damage to 

and 

both vehicles 

property, 

and property, particularly in areas of restricted space. Ideal for loading docks 

• Helps identify columns and 

particularly 

car parks. or Made obstruction from 

in 

recycled 

areas 

rubber in of low restricted 

with reflective light panels. areas space. Ideal 

• Supplied with fixing for holes loading docks and car parks. Made from 

recycled rubber with reflective panels. 

Parcsafe corner guards Specification are designed to Guide prevent damage to both vehicles 

• Helps identify columns or obstruction in low light 

and property, particularly Install in Parcsafe areas Corner of restricted Guards PS-CFCG-8080 space. Ideal to all for car loading park areas docks in 

areas 

accordance with manufacturer’s recommendation. Available from Parcsafe 

and car parks. Made from recycled rubber with reflective panels. 

Pty Ltd • by Supplied contacting enquiries@parcsafe.com.au 

with fixing holes 

Recycled Rubber 





Application Corners of car park pillars and walls 

Specification Material Guide Recycled rubber 

Install Colour Parcsafe Black/Yellow Corner Guards PS-CFCG-8080 to all 

Install Parcsafe Corner Guards PS-CFCG-8080 to all car park areas in 

car park areas in accordance with manufacturer’s 


recommendation. Available from Parcsafe Pty Ltd by 

Pty Ltd by contacting enquiries@parcsafe.com.au 

contacting enquiries@parcsafe.com.au 


Application 

Material 

Colour 


height 

(mm) 


PS-CFCP-8080 

B 

width (mm) 


black/yellow 800 100 100 

corner guards 

C 

width (mm) 

Application: Corners of car park pillars and walls 

Corners of car park pillars and walls 

Material: Recycled rubber 


Colour: Black/Yellow Black/Yellow 



height 

(mm) 

B 

width (mm) 

C 

width (mm) 



PS-CFCP-8080 black/yellow 800 100 100 

© 2020 Parcsafe corner Pty guards Ltd. 


Height (mm) 

B 

Width (mm) 

C 

Width (mm) 

PS-CFCP-8080 

Recycled rubber black/yellow corner 

guards 

800 100 100 




| E - enquiries@parcsafe.com.au | Address - Unit 2 / 18 Success St Acacia Ridge QLD 4110 



Unbreakable polycarbonate face 



Adjustable to any angle 



Convex Mirror 


CONVEX MIRROR 

Indoor/ Outdoor Convex Mirror 

Polycarbonate Indoor face / Outdoor mirrors Convex Mirror 

Polycarbonate face mirrors 

Convex Mirror 

•Adjustable to any angle 

•Extendable stand-off arm avavailable 

PARCSAFE convex mirrors are durable and 

•Available e with galvanised wall and post mount brackets 

weather proof, suitable for road and pedestrian 

Indoor/ Outdoor PARCSAFE convex Convex mirrors are durable Mirror and weather proof, suitable for road 

and pedestrian 

traffic 

traffic 

applications, 

applications, warehouses, 

warehouses, 

distribution depots 

distribution 

and car 

Polycarbonate face mirrors 

parksdepots and car parks 

Specification • Adjustable Guide to any angle 

Install Parcsafe Safety Mirrors (insert code) to all car park areas in 

• Extendable stand-off arm avavailable 

accordance with manufacturer’s recommendations. 

•Adjustable to any Available angle • from: Available Parcsafe Pty e with Ltd email galvanised enquiries@parcsafe.com.au wall and post mount 

•Extendable stand-off arm brackets avavailable 

•Available e with galvanised wall and post mount brackets 


PARCSAFE convex Application mirrors are durable Indoor and or Outdoor weather proof, suitable for road 

and pedestrian traffic Material applications, warehouses, Unbreakable polycarbonate distribution facedepots and car 

Colour 

High visibility orange visor 

parks 



Install Parcsafe Safety Mirrors (insert code) to all 

Install Parcsafe Safety car Mirrors park (insert areas code) inaccordance to all car park with areas manufacturer’s 

in 

accordance with manufacturer’s recommendations. recommendations. 


size height width reach 

(mm) (mm) (mm) (mm) 

Available from: Parcsafe Available Pty Ltd email from: enquiries@parcsafe.com.au 

Parcsafe Pty Ltd email enquiries@ 



Application 

Material 

Colour 

Indoor Convex mirror 

PS - IM60IN 

600 - - - 

with wall / post bracket 

Outdoor convex mirror with 

PS - IM60EX 

wall / post bracket 

600 - - - 


Galvanised post with cap to 

PS - PT325GC 

- 3250 60 - 

suit core drilling 

Application: Indoor or Outdoor 

Indoor or Outdoor 

Finish: Unbreakable polycarbonate face 

Unbreakable polycarbonate face 

Colour: High visibility orange visor 

High visibility orange visor 

PS - PT280GB Galvanised post with cap - 2800 60 - 

PS - EA46SA Extendable stand-off arm - - - 400-600 

arbonate face 

ngle 




size height width reach 

(mm) (mm) (mm) (mm) 


B 

C 

D 

size Indoor (mm) Convex mirror 

PS - IM60IN 

height (mm) 600 - width (mm) - - reach (mm) 

with wall / post bracket 

Indoor Convex mirror with wall / 

PS - IM60IN 

600 Outdoor convex mirror - with 

PS - IM60EX 

600 - - - 

post bracket 

- - 

wall / post bracket 

PS - IM60EX 

PS - PT325GC 

Galvanised post with cap to 

Outdoor convex mirror with PS wall - PT325GC / 

- 3250 60 - 

600 suit core drilling - - - 

post bracket 


Galvanised post with cap to suit 

- 3250 60 - 

core drilling 




1 

92 

www.parcsafe.com.au




Non-slip surface 


Speed Hump 


Rubber Economy speed hump Rubber 

Rubber speed hump 


• Only 6 fixings required on 1 metre lengths (rather than8) 

These are included 

• High traffic areas 

• Interlocking sections to ‘spread the load’ across all the 

Bollards 

fixings 

• Recessed speed d is fixing imperative. 

points 

• Inbuilt reflectors 

PARCSAFE rubber speed humps are a great economical option. Speed 

provide high visibility. 


• Stands 1000mm Specification tall • when Only 6 locked fixings Guide required on 1 metre lengths 

• Flat on ground 80mm Install PARCSAFE (rather high Speed than8) Humps These (insert are code) included 

to car park areas as requested 

in accordance • High with traffic manufacturer’s areasrecommendations. Available from Parcsafe 

• Includes fixings and key 

by contacting enquiries@parcsafe.com.au 

• Broad face of 100mm • Interlocking sections to ‘spread the load’ across 

all the fixings 


The PARCSAFE fold down • Recessed bollard has d been fixing designed points for vehicle 

Application Bitumen or concrete 

access control and parking • space Inbuilt protection. reflectorsReflective sign face 

Material 

Length 

Colour 



SPEED HUMP 

PARCSAFE rubber speed humps are a great 

economical option. Speed humps are required 

to prevent speeding in areas where a slow 

For example: schools, parks and secondary roads. 

Fold Down Steel humps Manufactured are required Bollards 

to prevent from speeding sturdy in areas recycled where a rubber, slow speed they is are 

imperative. built to For withstand example: schools, harsh parks conditions and secondary roads. and Manufactured provide high 

Fold down access 

from 

barrier 

sturdy recycled rubber, they are built to withstand harsh conditions and 

visibility. 

ordered separately. 

Recycled and natural rubber 

1000mm, 500mm modules 

Black/Yellow stripes 



Install Code PARCSAFE Description Speed Humps A (insert B Ccode) Dto car park 

length height width length 

areas as requested in accordance (mm) (mm) with (mm) manufacturer’s 

(mm) 

Parcsafe Fold Down bollards recommendations. provide the 

Rubber 

added 

speed 

security to your reserved 

parking spaces. This are provided hump with keys and bolt down kits 

PS-CF-RSH-1000 

Available 

1000 

from 

50 

Parcsafe 

340 

by 

- 

contacting 


Available in Hot Dipped Galvanised Finish or Powdercoated. Remote 

operated unit are available upon request. The dimension for remote 

operate units will vary from manual adjusted unit. Picture below 


Rubber speed 

PS-CF-RSH-500 

500 50 340 - 

hump 

Black rubber 

PS-CF-RSH-250BE 

end cap - 50 340 250 


Yellow rubber 

PS-CF-RSH-250YE 

- 50 340 250 

end cap 


Fixing 

Material: Masonry anchors Recycled (supplied) and natural rubber 

W - parcsafe.com.au | E - enquiries@parcsafe.com.au Locking | Address Padlock - Unit (supplied) 2 / 18 Success St Acacia Ridge QLD 4110 

© 2020 Parcsafe Length: Pty Ltd. 1000mm, 500mm modules 

Material 


Finish 

Colour: 

Galvanised, 

Black/Yellow 

Powdercoated 

stripes 

(standard Safety Yellow) 






B 

(mm) 

C 

(mm) (mm) (mm) 

D 

PS- MFBTS - XX Fold down, key lockable bollard 1000 80 100 

height up (mm) height down (mm) front width (mm) 

50 

side width (mm) 


yellow stripes on sign face 

Fold down, key lockable bollard 

PS- MFBTS - XX with reflective red/yellow stripes PS-RFBTI-XX1000 Fold remote operated 80 in Powdercoated 


600 10080 550 50 50 

on sign face 

control panel 


Fold remote operated in 

PS-RFBTI-XX 

Powdercoated in red, Suplied with 

remote control panel 

600 80 550 50 

Custom Powdercoated 

option available 


Heavy duty steel 



Checker plate surface 



Speed Hump 

SPEED HUMP 

Heavy Duty Steel Speed Hump 

Steel Heavy speed hump Duty Steel Speed Hump 

Steel speed hump 


• More than 4 times the load bearing contact area with the 

road surface than other speed humps 

• Use with or without end caps 

• Complete with all fixings 

• Independent modules for easy removal 

Product Data trucks. Sheet Perfectly suited to transport depots, 

• Does not require a rubber underlay to prevent rattle 

• Concealed factories fixings and remain terminals. accessible 

• Modules have a built-in bridge design to accommodate 

hoses and cables 

Corner Guards 

PARCSAFE heavy duty steel speed humps are for heavy vehicle applications 

- including large trucks. Perfectly suited to transport depots, factories 

and terminals. The superior strong chassis construction along with 6mm 

floor plate and 6 bolt fixing makes the heavy duty steel speed hump virtually 

PARCSAFE heavy duty steel speed humps are 

for heavy vehicle applications - including large 

The superior strong chassis construction along with 

6mm floor plate and 6 bolt fixing makes the heavy 

duty steel speed hump virtually indestructible. It has 

more than 4 times the load bearing contact rea with 

the road surface compared to conventional types. 

Protective Corner indestructible. It Guards 

has more than 4 times the load bearing contact rea with 

Designed to comply with AS2890.1-2004 These 

the road surface compared to conventional types. Designed to comply with 

Rubber corner guard 

AS2890.1-2004 versatile These speed versatile humps speed can humps be can used be used with or or without without 

end end caps for caps slowing for of slowing heavy vehicles. of heavy vehicles. 

Specification • Complies with Guide AS2890.1-2004 

Install PARCSAFE Speed Humps (insert code) to car park areas as requested 

• More than 4 times the load bearing contact area 

• Helps identify columns in accordance or with obstruction manufacturer’s recommendations.Available in low light areas from Parcsafe 

with the road surface than other speed humps 

• Supplied with fixing Pty Ltd holes by contacting enquiries@parcsafe.com.au 

• Use with or without end caps 


Parcsafe corner guards Application are • Complete designed Bitumen to with prevent all fixings 

or concrete damage to both vehicles 

and property, particularly Material in 

• 

areas 

Independent 

of restricted Recycled modules and space. natural for rubber Ideal 

easy 

for 

removal 

loading docks 

Length • Does not 1000mm, require 500mm a rubber modules 

and car parks. Made from recycled rubber with reflective 

underlay 

panels. 

to prevent 

Colour 

Black/Yellow stripes 

rattle 

• Concealed fixings remain accessible 

Code• Modules have Description a built-in A bridge B design C to D 

length height width length 

accommodate hoses (mm) and cables 

(mm) (mm) (mm) 


Steel heavy 

PS-CF-HDSH-1000 duty speed 1000 55 350 - 

Install Parcsafe Corner Guards PS-CFCG-8080 to all car park areas in 

hump 


PS-CF-HDSH-500 

Steel heavy 

duty speed 

hump 

Pty Ltd by contacting enquiries@parcsafe.com.au 


500 55 350 - 

PS-CF-HDSH-YE Steel end cap - 55 350 175 

W - parcsafe.com.au | E - enquiries@parcsafe.com.au | Address Application: - Unit 2 / 18 Bitumen Success or St Acacia concrete Ridge QLD 4110 


© 2020 Parcsafe Material: Pty Ltd. Recycled and natural rubber 


Application Corners of car park pillars and walls 

Length: 1000mm, 500mm modules 

Material 


Install PARCSAFE Speed Humps (insert code) to car park 

Colour 

Colour: Black/Yellow Black/Yellow stripes 

areas as requested in accordance with manufacturer’s 

recommendations.Available from Parcsafe Pty Ltd by 

contacting enquiries@parcsafe.com.au 

Product Code Description 


A 

B height 

length (mm) height (mm) 


PS-CFCP-8080 black/yellow 

corner guards 

B 

C 

width C (mm) width (mm) 

width (mm) 

PS-CF-HDSH-1000 Steel heavy duty speed hump 1000 55 350 - 

800 100 100 

PS-CF-HDSH-500 Steel heavy duty speed hump 500 55 350 - 

PS-CF-HDSH-YE Steel end cap - 55 350 175 

94 

www.parcsafe.com.au


CARPARK FITOUT & DESIGN

CARPARK SAFETY AND SECURITY 

96 

www.parcsafe.com.au

CARPARK Safety and Security 

INCREASE YOUR CARPARK OR PUBLIC 

SPACE USAGE WITH CUSTOM SAFETY AND 

SECURITY SYSTEMS 

Ensuring your carpark or public space is safe and secure 

is a critical part of encouraging and maintaining repeat 

customers or clients. That’s why PARCsafe continues to 

evolve by developing new products and services to meet 

the need in the Australian parking and access industries. 

We can provide advice and systems for health 

requirements, touchpoints, vehicle access into pedestrian 

areas, lighting, area security, and floor quality and safety. 

The products that PARCsafe works with are proven 

and tested at a global level to ensure we are installing 

a system that will always protect Australians. Testing 

certification is available on all products that we offer. 

PARCsafe’s parking consultants can visit your site and 

assess your current carpark, vehicle access or urban area 

and determine what we can do to improve its safety and 

security, using some or all of the products below. 

We have a range of CCTV cameras 

that will work and interface with the 

LPR cameras and carpark management 

systems along with externally rated 

sanitising station that are built strong 

enough to withstand vehicle impact you 

are always safe with PARCSAFE. 

CARPARK SAFEY 



4MP EXIR VF BULLET 

NETWORK CAMERA 

BirdWatch CCTV 

Latest generation CCTV camera that will ensure 

the highest security at entry/exit points as well 

as in any part of the car park. 

• 1/3” progressive scan CMOS 

• 2560 × 1440@20fps 

• 2.8 mm to 12 mm varifocal lens 

• H.265+, H.265, H.264+, H.264 

• Color: 0.01 Lux @ (F1.2, AGC ON), 0.018 

Lux @ (F1.6, AGC ON) 

• BLC/3D DNR/ROI 

• Up to 30 m IR range 

• IP67 

• 120 dB WDR 

• Built-in micro SD/SDHC/SDXC card slot, up 

to 128 GB 


OPERATING 

CONDITIONS 

-30°C to60°C (-22°F to140°F), humidity: 95% or less (non-condensing) 

POWER SUPPLY 12 VDC± 20%, 5.5 mm coaxial power plug, PoE (802.3af, class 3) 

POWER 

CONSUMPTION 

PROTECTION 

IR RANGE 

-IZ: 12 VDC, 0.9A, max.11W;PoE: (802.3af, 36V to 57V), 0.4A to 0.2 A, max.12.9W 

-I: 12 VDC, 0.6A, max.7W; PoE: (802.3af, 36V to 57V), 0.3A to 0.1 A, max.9W 

IP67 

TVS 2000V lightning protection, surge protection and voltage transient protection 

2.8-12mm: Approx. 20 to 30 metres 

SIZE 105mm ×105mm ×145 mm (4.1” ×4.1”×5.7”) 

WEIGHT 

Camera: approx. 1035g (2.3lb.) 

With package: approx. 1550 g (3.4 lb.) 

98 

www.parcsafe.com.au

FEATURES 

CAMERA 

IMAGE SENSOR 

AUTO IRIS 

MIN. LIGHTING 

SHUTTER TIME 

LENS 

DAY & NIGHT 

WIDE DYNAMIC RANGE 

DIGITAL NOISE REDUCTION 

FOCUS 

STANDARD COMPRESSION 

VIDEO COMPRESSION 

VIDEO BIT RATE 

IMAGE 

MAXIMUM IMAGE RESOLUTION 

FRAME RATE 

IMAGE SETTINGS 

BLC 

HLC 

SMART DEFOG 

EIS 

INTERFACE 

COMMUNICATION 

INTERFACE 

RESET BUTTON 

1/3’’ Progressive Scan CMOS 

No 

Color: 0.01Lux @(F1.2,AGC ON). 0.018Lux @ (F1.6, AGC ON) 

1/3 s to 1/100,000 s, support slow shutter 

2.8 to 12mm 

IR cut filter 

120 dB 

3D DNR 

-I: Manual -IZ: Auto 

Main stream:H.265/H.264. Sub-stream:H.265/H.264/MJPEG 

32Kbps to 8Mbps 

2560x1440 

50Hz: 20fps(2560 × 1440), 25fps (2304×1296, 1920 × 1080, 1280 × 720) 

60Hz: 20fps (2560 × 1440), 30fps (2304×1296, 1920 × 1080, 1280 × 720) 

Saturation, brightness, contrast, sharpness, AGC, white balance adjustable by 

client software or web browser 

Yes, zone configurable 

Supported 

Supported 

Supported 

1 RJ45 10M/100M self-adaptive Ethernet port 

Yes 

CARPARK SAFEY 

Ensure the highest security at entry/exit points as well as in any 

part of the car park. 



URBAN CLEAN 

Contactless hand sanitizer bollard 

dispenser 

Urban Clean is the result of over 30 years 

developing safety for public space access 

areas. A contactless hand santiser station to 

assist council and ogvernment departments in 

dealing with pandemics. 

• UrbanClean maintains sanitary condition in 

public spaces with a contactless trigger 

• Antivandalism structure and well design 

• Compiance with accessibility standards 

FEATURES 

• Contactless hand sanitizer dispenser 

• Available in 3 versions: power supply, on 

rechargeable batteries or solar power 

• Antivadalislm steel structure 

• Management by Programmable Logic Controller (PLC) 

• High capacity gel storage (hydroalcoholic gel) 

• Automatic dispense by hands detection 

• LEDs lighting 

• 230 V Mono power supply 

THE ECOLOGICAL CHOICE 

• 15000 doses capacity rechargeable 

• Low consumption 

• Avoid the use of independent plastic bottles 

• Made In France 

100 

www.parcsafe.com.au


POWER SUPPLY 

230 V mono or solar power or rechargeable batteries 

CONSUMPTION 5 W (for 230 V) 

PUMP 

SOLAR BATTERIES 

parcsafe.com.au SOLAR PANNELS 

Low voltage 

12 V 

Integrated to the cover Urban Clean 

PAINT / FINISH RAL to choose – Polyester powder paint coating heat treated at 220 °C 

WEIGHT 

70 kg 

Contactless TEMPERATURE UrbanClean 

-30° + 55° C 

CONDITIONS 

hand sanitizer dispenser 

CHOOSE URBAN CLEAN 

• Maintains sanitary conditions in 

public spaces; contactless trigger 

• Antivandalism structure and 

well designed (no visible devices 

avoiding vandalism) 

• In compliance with the persons 

with reduced mobility standards 

• Urban product 

CONTACTLESS URBANCLEAN 

HAND SANITIZER DISPENSER 

CHOOSE URBAN CLEAN 

• Maintains sanitary conditions in public spaces; 

contactless trigger 

• Antivandalism structure and well designed (no 

visible devices avoiding vandalism) 

• In compliance with the persons with reduced 

mobility standards 

• Urban product 

TECHNICAL CHARACTERISTICS 

TECHNICAL CHARACTERISTICS 

• 4 mm cataphoresis coated steel plate 

• Standard • 4 mm RAL cataphoresis 7016 coated steel plate 

• Equipped with anti vandalism double locks 

• Standard RAL 7016 

• Stainless steel box with gel collector 

• Hands 

• Equipped 

proximity 

with 

infrared 

anti vandalism 

sensor 

double locks 

• Equipped • Stainless with steel a 15,000 box with doses gel reservoir collector 

• PLC management • Hands proximity : infrared sensor 

› Hands • Equipped approach with a management 

15,000 doses reservoir 

› Manageable • PLC management: delay between 2 dispenses 

› Data 

– Hands 

transfer 

approach 

by ModBus 

management 

TCP/IP or 4G 

(feedback of the number of doses distributed, 

– Manageable delay between 2 dispenses 

the filling rate, number of doses remaining) 

• Anti-coagulation 

– Data transfer 

function 

by ModBus 

in case 

TCP/IP 

of prolonged 

or 4G 

nonuse 

• (feedback of the number of doses distributed, 

• Anti • abuse the filling function rate, number configurable of doses between remaining) 5 and 15 

seconds • Anti-coagulation function in case of prolonged 

non-use 

• Anti abuse function configurable between 5 and 

15 seconds 

TECHNICAL OPTIONS 


CARPARK SAFEY

TECHNICAL OPTIONS 

TECHNICAL 

• Specific RAL 

OPTIONS 

colour 

• Stainless steel housing with finishing paint 


Urban Clean 

• Sealing template 

• Specific • RAL 15 000 colour of hydroalcoholic gel container Miss CLean 

• Stainless compatible steel housing with finishing paint 

• Sealing template 

• 15 000 of hydroalcoholic gel container Miss Clean compatible 

STANDARD INSTALLATION 

STANDARD 

INSTALLATION 

2 

SOLAR INSTALLATION 

102 

www.parcsafe.com.au

STALLATION 

SOLAR 

INSTALLATION 

3 

CARPARK SAFEY 


104 

www.parcsafe.com.au


CARPARK SAFEY

PEDESTRIAN ACCESS EQUIPMENT 

SECURITY BY DESIGN TO MEET ARCHITECTURAL EXPECTATIONS. 

106 

www.parcsafe.com.au

Pedestrian Access Systems 

WORLD-LEADING DESIGNS FOR SECURE 

PEDESTRIAN ACCESS 

In today’s world there is an obvious increasing 

requirement both for secure parking and pedestrian 

access points, along with the ability for touchless or 

contactless technology points. PARCsafe can provide you 

with both. 

Our pedestrian access control solutions come from a 

precise selection of qualified global suppliers. They 

provide equipment that is reliable, scalable, and can be 

delivered on time and to budget. 

We work with the global leader in the automation of 

secure pedestrian access control. PARCsafe have the 

expertise to design high-end obstacles, one-person 

detection and throughput management, ensuring high 

performance, quality and reliability. 

We can provide solutions ranging from small swing gates, 

to small and discreet SlimLane access, right through to 

full height security turnstiles. 

Our systems will integrate with all access systems to 

ensure your building and facilities benefit from seamless, 

contactless and touchless controls. 




SLIMLANE 940 

Pedestrian Access Control Solution 

PS-PBAS-Slimlane 

The SlimLane 940 double swing door security 

entrance lane offers a high bidirectional 

throughput and uncompromising security. 

1. Handrail frame: steel beam with RoHS anti-corrosion zinc 

plating treatment and stainless steel posts. The handrail 

includes photoelectric cells for user detection and the logic 

control board. 

2. Self-supporting kinematic steel frame with RoHS anticorrosion 

zinc plating treatment. The frame contains the 

electromechanical drive assembly for the swinging obstacle 

and the electronic control boards. 

3. Brushed #4 AISI 304L stainless steel housing. 

4. Brushed #4 AISI 304L stainless steel panels fastened to the 

frame for access to the internal components. 

5. Clear, 10 mm thick tempered monolithic glass obstacles, 

swinging in the direction of user passage. 

6. Brushed #4 AISI 304L stainless steel top cover. 

7. Electromechanical drive units each consisting of: 

• A DC permanent magnet motor with epicyclic gearbox. 

• A controller providing progressive accelerations and 

decelerations of the obstacle, for smooth movement and 

enhanced user safety. 

• A geared electromagnetic brake for locking of obstacles in 

the event of forced entry attempts. 

• A sensor controlling the obstacle position. 

• SECURI-SAFE standard operating mode: electromechanical 

lock of the obstacles in case of forced entry attempt in any 

passage directions. 

8. AS1167 logic control board, equipped with ARM technology 

and the Linux operating system, ensuring advanced traffic 

management. An embedded Web server, accessible 

by a simple web browser, offering an interface for the 

configuration of functional gate parameters as well as a 

complete diagnostic and maintenance tool. 

9. Transfer of information from XML-RPC protocol through 

an Ethernet or USB interface, and dry contacts: passage 

authorisation, passage information, reader locking, fraud, 

equipment failure, … 

10. Orientation and function pictograms indicating gate and 

passage status to the user. 

11. Proprietary DIRAS detection system, consisting of a highdensity 

matrix of infrared transmitter/receiver photocells 

beams. It follows users progression through the gate as 

well as ensuring their safety during opening / closing of the 

obstacles. 

12. Finishing plate for post. 

With its transparent, elegant design and minimal 

footprint, the SlimLane 940 is designed to integrate 

perfectly into any architectural style. Equipped with 

high processing capacity and an exclusive detection 

system, the SlimLane 940 guarantees accurate user 

tracking and prevents any unauthorised use. The 

SlimLane 940 is a modular product that can be 

installed as a single or a multi-lane array and can also 

be combined with the SlimLane 950 wide lane model. 

PRECAUTIONS FOR USE 

• For security reasons, children (user smaller than 1 m tall for 

mobile obstacles of 900 mm height and smaller than 1,3 

m for mobile obstacles from 1200 mm to 1700 mm height) 

must be supervised by an adult at all times when in the 

vicinity of the unit and during passage through the lane. 

• A child must absolutely precede the accompanying adult 

when lane passage is required. 

• If habitual use by children is anticipated, Automatic Systems 

recommends the addition of all options required to optimize 

the level of protection. 

108 

www.parcsafe.com.au



POWER SUPPLY 

CONSUMPTION 

STANDARD TECHNICAL CHARACTERISTICS (per lane) 

MOTORS (X2) 

Electrical PASSAGEWAY supply (L) 

Power MIN OPENING OR CLOSING TIMES 

consumption 

AMBIENT OPERATING TEMPERATURE 

Motors (x2) 

AMBIENT RELATIVE HUMIDITY IN OPERATION 

Passageway (L) 

MCBF 

Min opening or 

closing times 

SOUND LEVEL 

Ambient operating 

Temperature WEIGHT 

Ambient relative 

humidity in 

operation 

IP 40 

CE 

MCBF 

WARRANTY 

Sound level 

OPTIONS 

Weight 

IP 40 

1. EGRESS operating mode: Conforms obstacles to European open standards in the 

direction of egress by a simple push. 

5 Year Warranty* 

2. Battery backup for PRECAUTIONS automatic opening FOR USE in case of 

power failure and obstacles locking mechanism in 

egress direction. 

- For security reasons, children (user smaller than 1 m tall for mobile 

3. Clear, 10 mm thick tempered glass side panels. 

4. Mobile leaf height: 1200, 1500 or 1700 mm. 

5. Enhanced electronic protection and ‘trolley’ 

protection cells kit (A and B directions). 

- If habitual use by children is anticipated, Automatic Systems recom- 

6. Transparent glass side wall with enhanced electronic 

mends 

protection 

the addition 

and 

of 

‘trolley’ 

all options 

protection 

required to 

cells 

optimize 

kit (A 

the 

and 

level 

B 

of 

protection. 

directions). 

Single phase 240 VAC (+/-10%) - 5A - 50 Hz + Ground 

Standbay: 50 W, Cycle: 170 W, Maximum: 300 W 

24 VDC – nominal output power 93 W 

600 mm, egress 550 by mm a simple < L < push. 725 mm (min/max) 

0,7s (Depending on the access control system reactivity and 

and obstacles locking mechanism in egress direction. 

the speed of users) 

0° + 55° C 

< 95%, no condensation 

5,000,000 mean cycles between failures, 

with recommended maintenance. 

55 dB 

obstacles of 900 mm height and smaller than 1,3 m for mobile obstacles 

from 1200 mm to 1700 mm height) must be supervised by an adult at all 

times when in the vicinity of the unit and during passage through the 

lane. 

- A child must absolutely precede the accompanying adult when lane passage 

is required. 

Slimlane Pedestrian Access Control Solution PS-PBAS-Slimlane 

Single phase 240 VAC (+/-10%) - 5A - 

50 Hz + Ground 

Standbay: 50 W 

Cycle: 170 W 

Maximum: 300 W 

24 VDC – nominal output power 93 W 

600 mm 

550 mm < L < 725 mm (min/max) 

0,7 s 

(Depending on the access control system 

reactivity and the speed of users) 

0 à +50°C 

< 95%, no condensation 

5,000,000 mean cycles between failures, 

with recommended maintenance. 

55 dB 

62 kg (per left/right unit) 

91 kg (per intermediate unit) 

OPTIONS 

1. EGRESS operating mode: obstacles open in the direction of 

2. Battery backup for automatic opening in case of power failure 

3. Clear, 10 mm thick tempered glass side panels. 

4. Mobile leaf height: 1200, 1500 or 1700 mm. 

5. Enhanced electronic protection and ‘trolley’ protection cells kit 

(A and B directions). 

6. Transparent glass side wall with enhanced electronic protection 

and ‘trolley’ protection cells kit (A and B directions). 

7. Reader post. 

8. Standard support bracket for external reader integration. 

62 kg (per left/right unit), 91 kg (per intermediate unit) 

9. Customised self-adhesive logo on obstacles. 

10. Black handrail cover. 

11. Fixing frame to embed in the concrete, to fix the equipment and 

Conforms to European standards 

pass the electric cables. 

12. Monitoring panel. 

5 Year Warranty* 

13. Connectivity kit for Ethernet connection of one or more lanes to 

the network. 

Note: For restrictions on options, refer to the price list. 

7. Reader post. 

8. Standard support bracket for external reader 

integration. 

9. Customised self-adhesive logo on obstacles. 

10. Black handrail cover. 

11. Fixing frame to embed in the concrete, to fix the 

equipment and pass the electric cables. 

12. Monitoring panel. 

13. Connectivity kit for Ethernet connection of one or 

more lanes to the network. 

STANDARD DIMENSIONS (mm) 

STANDARD DIMENSIONS (mm) 



W - parcsafe.com.au | E - enquiries@parcsafe.com.au | Address - Unit 2 / 18 Success St Acacia Ridge QLD 4110


SPEEDGATE 

KINETIC 

The SPEEDGATE KINETIC combines security 

and aesthetics all in one stylish product. 

• Ultra high speed access with seamlessly 

integrated motor drive technology 

• The most sophisticated product of its type in 

Africa 

• Exported worldwide 

UNIQUE FEATURES OF THE SPEEDGATE KINETIC 

• Designed by professional engineers 

• Cutting edge technology used in both the design and manufacture 

RELIABLE TECHNOLOGY 

DURABLE FEATURES 

GUARANTEED 

MANUFACTURED TO LAST 

• Ultra-heavy-duty high speed motor drive and gearbox 

• Intelligent motor - tamper detection feedback 

• Built-in intelligent PLC controller 

• Motion detection sensor array – dynamic following of the pedestrian through the 

Speedgate Kinetic 

• Highly sophisticated anti-tamper detection 

– Tailgating 

– Unauthorised direction 

– Crawling 

• Safety - a series of detectors are used to prevent closing when a person or object 

is in the closing envelope 

CABINET 


• 3D designed and precision laser cut components 

• Hand-made with expert welding and polishing 

• Recess with polycarbonate infill for concealed reader mounting (option) 

• LED lane status and direction indicator lights 

GLASS WING 

• 8mm CNC toughened glass 

• Direct motor mount technology – removing any linkages and bearings which are 

prone to failure 

• 3 year mechanical guarantee 

• 1 year electrical guarantee 

110 

www.parcsafe.com.au

SPEEDGATE KINETIC 

APPLICATIONS 

DESIGNED FOR 

AVAILABLE 

CONFIGURATIONS 

SECURITY RATING 

• Suited for applications requiring ultra high speed access and medium levels of 

security 

• Used extensively in applications such as office receptions, airports, universities, 

health clubs and railways 

• Interior and covered exterior installations 

• Severe operating conditions 

• Narrow lane (550mm), standard lane (650mm) and wide lane (900mm) - suitable 

for special needs access such as wheelchairs 

• Multiple lane configurations 

4 stars 


POWER 

FREQUENCY 

POWER 

CONSUMPTION 

POWER FAILURE 

OPERATION 

FIRE ALARM 

OPERATION 


OPERATING CYCLE 

TIME 

TAMPER ALARM 

STANDARD 

OPERATIONAL 

MODES 

220 Volt AC (110 Volt AC on request) 

50Hz / 60Hz 

300W per lane 

The glass wings can be easily moved into the cabinet to allow free access 

Trigger can activate barriers to remain in the open position for free access 

Integrates with all access control and time and attendance systems 

Open 

Close 

1 second 

• Electronic output for a building security alert, e.g. to lock doors or activate CCTV 

• LED lights show red cross 

• Internal buzzer sounds 

• Entry and exit 

• Entry only 

• Exit only 

All modes can be changed using a selector switch supplied with the Speedgate Kinetic 



SPEEDGATE KINETIC STAR INSTALLATIONS 

SPEEDGATE KINETIC STAR INSTALLATIONS 

SPEEDGATE MOTION SPEEDGATE EXPRESS SPEEDGATE SECURE 

112 

www.parcsafe.com.au

SPEEDGATE SPEEDGATE KINETIC RANGE KINETIC STAR INSTALLATIONS 

SINGLE LANE 

SIDE ELEVATION ENTRY / EXIT ELEVATION PLAN 

975 

1800 

1800 

A 

B 

A 

C 

LANE CONFIGURATION A B C 

NARROW LANE (550mm) 230 550 1010 

STANDARD LANE (650mm) 230 650 1110 

A 

B 

A 

WIDE LANE (900mm) 230 900 1360 

C 

DOUBLE LANE 

SIDE ELEVATION 

ENTRY / EXIT ELEVATION 

975 

1800 A B A B A 

C 


NARROW LANE (550mm) 230 550 1790 

1800 


WIDE LANE (900mm) 230 900 2490 

PLAN 

info@turnstar.co.za | www.turnstar.co.za 

Turnstar Systems (Pty) Ltd | Reg No: 2012/100536/07 | Established in 1990 

© Turnstar Systems 


JHB FACTORY 

18 6 th Street, Wynberg, 

Sandton, 2090 

T: +27 (0)11 786 1633 

F: +27 (0)11 440 5839 

CAPE BRANCH 

Unit 9 Elect Park, 

13 Teejay Road, Brackenfell, 

Cape Town, 7560 

T: +27 (0)21 981 3043 

KZN BRANCH 

MANUFACTURED TO LAST. 

Unit 5 - 7 Amatuli Industrial Park, 

5 - 7 Eagle Road, Shaka’s Head, 

Umhlali, Kwazulu-Natal, 4420 

T: +27 (0)32 947 0391 

POSTAL ADDRESS 

PO Box 41, 

Highlands North, 

2037 

TurnstarSA 

TurnstarSystems 


ISO 9001:2015


SPEEDGATE 

MOTION 

The SPEEDGATE KINETIC combines security 

and aesthetics all in one stylish product. 

• Ultra high speed access with seamlessly 

integrated motor drive technology 

• The most sophisticated product of its type in 

Africa 


UNIQUE FEATURES OF THE SPEEDGATE MOTION 


• Cutting edge technology used in both the design and manufacture 

RELIABLE TECHNOLOGY 

DURABLE FEATURES 

GUARANTEED 

MANUFACTURED TO LAST 

• Ultra-heavy-duty high speed motor drive and gearbox 

• Intelligent motor - tamper detection feedback 

• Built-in intelligent PLC controller 

• Motion detection sensor array – dynamic following of the pedestrian through the 

Speedgate Motion 

• Highly sophisticated anti-tamper detection 

– Tailgating 

– Unauthorised direction 

– Crawling 

• Safety - a series of detectors are used to prevent closing when a person or object 

is in the closing envelope 

CABINET 


• 3D designed and precision laser cut components 

• Hand-made with expert welding and polishing 

• Recess with polycarbonate infill for concealed reader mounting (option) 

• LED lane status and direction indicator lights 

GLASS WING 


• Direct motor mount technology – removing any linkages and bearings which are 

prone to failure 



114 

www.parcsafe.com.au

SPEEDGATE MOTION 

APPLICATIONS 

DESIGNED FOR 

AVAILABLE 

CONFIGURATIONS 

SECURITY RATING 

• Suited for applications requiring ultra high speed access and medium levels of 

security 

• Used extensively in applications such as office receptions, airports, universities, 

health clubs and railways 

• Interior and covered exterior installations 

• Severe operating conditions 

• Narrow lane (550mm), standard lane (650mm) and wide lane (900mm) - suitable 

for special needs access such as wheelchairs 

• Multiple lane configurations 

4 stars 


POWER 

FREQUENCY 

POWER 

CONSUMPTION 

POWER FAILURE 

OPERATION 

FIRE ALARM 

OPERATION 


OPERATING CYCLE 

TIME 

TAMPER ALARM 

STANDARD 

OPERATIONAL 

MODES 


50Hz / 60Hz 

300W per lane 

The glass wings can be easily moved into the cabinet to allow free access 

Trigger can activate barriers to remain in the open position for free access 

Integrates with all access control and time and attendance systems 

Open 

Close 

1 second 

• Electronic output for a building security alert, e.g. to lock doors or activate CCTV 

• LED lights show red cross 

• Internal buzzer sounds 

• Entry and exit 

• Entry only 

• Exit only 

• Optical mode for entry and exit 

All modes can be changed using a selector switch supplied with the Speedgate Kinetic 



SPEEDGATE MOTION STAR INSTALLATIONS 

THE SPEEDGATE RANGE INCLUDES 

SPEEDGATE KINETIC SPEEDGATE EXPRESS SPEEDGATE SECURE 

116 

www.parcsafe.com.au

SPEEDGATE MOTION SPEEDGATE RANGE MOTION RANGE 

SINGLE LANE 

SIDE ELEVATION ENTRY / EXIT ELEVATION PLAN 

1018 

1250 

1250 A B A 

C 

A 

B 

A 


C 

NARROW LANE (550mm) 280 550 1110 


WIDE LANE (900mm) 450 900 1800 

DOUBLE LANE 

SIDE ELEVATION 

ENTRY / EXIT ELEVATION 

1018 

1250 A B A 

C 

B 

A 

1250 


NARROW LANE (550mm) 280 550 1940 


WIDE LANE (900mm) 450 900 3150 

A 

A 

PLAN 

Turnstar Systems (Pty) Ltd | Reg No: 2012/100536/07 

Established in 1990 

B 

C 

B 

A 



JHB FACTORY 

18 6 th Street, Wynberg, 

Sandton, 2090 

T: +27 (0)11 786 1633 

F: +27 (0)11 440 5839 

CAPE BRANCH 

Unit 9 Elect Park, 

13 Teejay Road, Brackenfell, 

Cape Town, 7560 

T: +27 (0)21 981 3043 

KZN BRANCH 

Unit 4 Imbonini Mini Factories, 

Imbonini Business Park, R102, 

Umhlali, Kwazulu-Natal, 4420 

T: +27 (0)32 947 0391 

POSTAL ADDRESS 

PO Box 41, 

Highlands North, 

2037 


E: info@turnstar.co.za W: www.turnstar.co.za


STREAMLINE 

WAIST HEIGHT SINGLE TURNSTILE 

PS-PBTS-WH Tripod 

The Streamline Waist height single Turnstile has 

been designed to be suitable for both industrial 

and internal retail and office environments. 

With a 10 Year Mechanical warranty the design 

provides ultra quiet operation with high speed 

operation in application requiring medium levels of 

security. 

Available with powder coated finishes or in brushed 

stainless steel. 

ROTALOK® ROTATION LOCKING MECHANISM 

• Fitted to all STREAMLINE turnstiles 

• Ultra heavy-duty electromechanical rotation locking mechanism 

• Bi-directional operation 


• Tried, tested and perfected over a period of over 20 years 

RELIABLE 

TECHNOLOGY 

DURABLE 

FEATURES 

ROTASLO® 

HYDRAULIC 

DAMPING SYSTEM 

• Self-centering rotation system - rotor returns to starting position after every rotation 

• Anti-Trap® safety system - no mid-rotation locking or trapping in the event of a power 

failure 

• Extra secure 60º anti-reverse system 

• Programmable PLC logic with user diagnostic features 

• Mechanical key override - clockwise and anti-clockwise directions (fail-secure) 

• Zinc plated for corrosion resistance 

• Ultra quiet, buffered solenoids and pawls 

• Solenoids rated for 100% duty cycle 

• Case hardened locking disk and pawls - eliminating any wear 

• Factory settings need no further adjustment 

• No routine maintenance whatsoever, ever 

• Fitted to all STREAMLINE turnstiles 

• Consistently smooth rotation 

• Ultra quiet operation 

• Low mechanical stress 

• 1 year guarantee 

118 

www.parcsafe.com.au


POWER 

FREQUENCY 

POWER 

CONSUMPTION 

SOLENOID VOLTAGE 

LOGIC VOLTAGE 

DIMENSIONS 

ROTOR ARMS 

WEIGHT 

DESIGN 

SYSTEMS 

INTEGRATION 

220 Volt AC 

50Hz 

50W (single turnstile) 

24 Volt DC (12 Volt DC on request) 

24 Volt DC 

See over page 

38mm diameter stainless steel fixed tube arms 

STREAMLINE Single | 82kg 

Modular bolt-together design for ease of transport and installation. Components can 

pass through a standard door. Can be packed in broken-down form either onto a 

pallet or into a crate for transport 

• Integrates with all access control and time and attendance systems 

• Unlocking for entry / exit rotation controlled through normally open dry contact 

• Transaction / rotation complete output 

• Integral wireways with draw wires in place - no exposed wires 

MANUFACTURING OPTIONS 

ROTATION OPTIONS 

LOCKING OPTIONS 

• Electrically controlled bi-directional rotation (factory standard) 

• Mechanically controlled uni-directional rotation by means of key override 

• Free rotation 

• Fail-secure auto-lock on power failure (factory standard) 

• Fail-safe auto-unlock on power failure 

• Each direction of rotation configurable for either fail-secure or fail-safe operation 

FIRE ALARM OPTIONS 

POWER OPTIONS 

ACCESSORY OPTIONS 


OPTIONS 


OPTIONS 

Free rotation when triggered indefinitely (logic programmed for direction or rotation 

on request) 

Battery backup with two 12 volt 7Ah batteries connected in series 

• Up to 1 000 transactions in fail-safe mode 

• Up to 60 minutes operation in fail-safe mode 

• 600mm stainless steel and glass turnstile screen 

• Single / double pushbutton in plastic housing 

• LED red cross and green arrow indicator light 

• Multiple coin acceptor for pay-for-entry systems 

• LCD transaction counter with reset key switch 

• Random search device 

• Mild steel with UV resistant polyester exterior powder coat finish 

• (charcoal blue hammertone)* 


• 316 grade brushed stainless steel** 

**suitable for corrosive environments (details available on request) 

*other colours available on request 

• Stainless steel top cover standard 

• Rustenburg granite top cover 



STREAMLINE SINGLE 

STREAMLINE WAIST HEIGHT SINGLE TURNSTILE 



STAR QUALITIES 



1. Rotalok® rotation locking 

1 Rotalok® rotation locking mechanism 

mechanism and electronic control 

panel. and electronic Incorporates: control panel 

•- Rotaslo® Incorporates: hydraulic damping 

• Mechanical • Rotaslo® hydraulic key override damping (for free 

• rotation) Mechanical key override (for free rotation) 

1 Rotalok® rotation locking mechanism 

2 Lockable Rustenburg granite or stainless steel 

and 2. electronic Lockable control Rustenburg panel granite or 

stainless top coversteel top cover 

- Incorporates: 

3 Lockable side door 

• 3. Rotaslo® Lockable hydraulic side door damping 

4 38mm diameter stainless steel fixed tube arms 

• Mechanical key override (for free rotation) 

4. 5 38mm Access control diameter reader stainless mounting steel position 

2 Lockable Rustenburg granite or stainless steel 

6 fixed Wiring tube bottom arms entry point 

top cover 

5. 7 Access Floor bolting control positions reader mounting 

3 Lockable side door 

position 

4 38mm diameter stainless steel fixed tube arms 

5 Access 6. Wiring control bottom reader mounting entry point position 

6 Wiring 7. Floor bottom bolting entry point positions 

7 Floor bolting positions 

3 

3 

120 

www.parcsafe.com.au


PEDESTRIAN ACCESS


TRIDENT- 

SUPERMARKET 

Waist Height Single Turnstile 

PS-PBTS-SM Tripod 

The Trident waist height supermarket turnstile 

has been designed for high speed and with 

ultra quiet applications. 

It is provided with a 10 year mechanical warranty 

and suitable for both a prestige requirements and 

an industrial application. 

Suited for both internal and external application 

the TRIDENT is available in a single and double 

configuration. 


• Fitted to all TRIDENT turnstiles 

• Ultra heavy-duty electromechanical rotation locking mechanism 



• Tried, tested and perfected over a period of over 20 years 

RELIABLE 

TECHNOLOGY 

DURABLE 

FEATURES 

GUARANTEED 

MANUFACTURED 

TO LAST 

• Self-centering rotation system - rotor returns to starting position after every rotation 

• Anti-Trap® safety system - no mid-rotation locking or trapping in the event of a power 

failure 

• Extra secure 60º anti-reverse system 

• Programmable PLC logic with user diagnostic features 

• Mechanical key override - clockwise and anti-clockwise directions (fail-secure) 


• Ultra quiet, buffered solenoids and pawls 


• Case hardened locking disk and pawls - eliminating any wear 





• With a wide range of applications, the TRIDENT 

is becoming one of the highest selling waist height 

turnstile in the world 

• Suitable for both prestige and industrial installations 

• Designed for high speed ultra quiet operation 


122 

www.parcsafe.com.au


POWER 

FREQUENCY 

POWER CONSUMPTION 


LOGIC VOLTAGE 

DIMENSIONS 

ROTOR ARMS 

WEIGHT 

DESIGN 



50Hz 

50W (single turnstile | 100W (double turnstile) 


24 Volt DC 

See overleaf 

38mm diameter stainless steel fixed tube arms 

Single: 68kg 

Double: 114kg 


pas through a standard door. Can be packed in broken-down form either onto a 

pallet or into a crate for transport 

• Integrates with all access control and time and attendance systems 








POWER OPTIONS 






• Each direction of rotation configurable for either fail-secure or fail-safe 

operation 

Free rotation when triggered indefinitely (logic programmed for direction or rotation 

on request) 

Battery backup with two 12 volt 7Ah batteries connected in series 

• Up to 1 000 transactions in fail-safe mode 

• Up to 60 minutes operation in fail-safe mode 



OPTIONS 

• 600mm stainless steel and glass turnstile screen 


• LED red cross and green arrow indicator light 

• Multiple coin acceptor for pay-for-entry systems 



• Mild steel with UV resistant polyester exterior powder coat finish (charcoal blue 

hammertone)** 



*suitable for corrosive environments (details available on request) 

**other colours available on request 



OPTIONS 

• Rustenburg granite top cover 

• Stainless steel top cover 



TRIDENT SINGLE 

Waist Height Single Turnstile PS-PBTS-SM Tripod 

TRIDENT WAIST HEIGHT TURNSTILE RANGE 

TRIDENT WAIST HEIGHT TURNSTILE RANGE 

615 

TRIDENT SINGLE 

615 

TRIDENT DOUBLE 

615 

TRIDENT DOUBLE 

615 


© Parcsafe 


5 

5 

2 

2 

1 

3 

1 

3 

4 

4 

1 Rotalok® rotation locking mechanism and electronic c 

panel 


1 Rotalok® rotation - Incorporates: locking mechanism and electronic control 

panel 

• Rotaslo® hydraulic damping 

- Incorporates: 1. Rotalok® rotation locking mechanism and 

• Rotaslo® electronic 

• Mechanical 

hydraulic control damping panel. 

key override 

Incorporates: 

(for free rotation) 

• Mechanical • Rotaslo® 2 Lockable 

key hydraulic granite 

override (for damping or stainless steel top cover 

free rotation) 

2 Lockable • Mechanical 3 granite Lockable or stainless key side override door steel top (for cover free rotation) 

3 Lockable 2. Lockable 4 side 38mm doorgranite diameter or stainless steel steel top fixed cover tube arms 

4 38mm diameter 5 Access stainless control steel reader fixed tube mounting arms position 

3. Lockable side door 

5 Access 

6 

control 

Wiring 

reader 

bottom 

mounting 

entry 

position 

point 

6 Wiring 4. 38mm bottom entry diameter pointstainless steel fixed tube arms 

7 Floor bolting positions 

7 Floor 5. bolting Access positions control reader mounting position 

6. Wiring bottom entry point 

7. Floor bolting positions 

7 

7 

6 

6 

3 

124 

www.parcsafe.com.au


PEDESTRIAN ACCESS


PULSE 

Waist Height Automatic Frameless Gate 

PS-PBTS-SM Frameless 

The PULSE Frameless Gate system provides 

controlled touchless unassisted opening access 

into supermarkets, reception areas, commercial 

building, health clubs or public buildings. 

Incorporating a BLDC motor drive technology and 

suited for indoor application the PULSe will open 

an dlcose automatically on approach Supplied in 

Stainless Steel, frameless toughened glass and open 

180 degrees. 

PULSE FRAMELESS GATE SYSTEM 


• Cutting edge motor drive technology 

• 12 month guarantee 

RELIABLE 

TECHNOLOGY 

DURABLE 

FEATURES 

• Ultra reliable BLDC motor drive with planetary gearbox 

• Tooth clutch for effective locking 

UPRIGHT POST: 

• 140mm diameter 304 grade brushed stainless steel 

WING OPTIONS: 


• 38mm diameter stainless steel frame with 25mm diameter horizontals 

Compliments other pedestrian access system and glass 

railing requirements. 

126 

www.parcsafe.com.au


POWER 

OPERATING VOLTAGE 

COLLISION DETECTION 

POWER FAILURE 

OPERATION 

FIRE ALARM OPERATION 


CONTROL UNIT AND 

PSU 

TRIGGER OPTIONS 

100V - 240V AC ±10% at 50Hz 

24 Volt DC 

Current sensing 

The glass wing can be easily be turned by hand 

Trigger allows automatic opening in desired direction 

Integrates with all access control and time & attendance systems 

Supplied in gate upright post (no separate box) 

Trigger to open - timeout to close (15 seconds) | Trigger to open - trigger to close 


WAIST HEIGHT AUTOMATIC FRAMELESS GATE PS-PBTS-SM FRAMELESS 

PULSE AUTOMATIC GATE RANGE 

FRAMELESS 

STAINLESS STEEL FRAME 

700 

200 

850 

700 

200 

850 



compliments other Pedestrian access System and glass railing requirements 



DYNAMIC 

Drop Arm Barrier 

PS-PBTS-WH Drop Arm 

The Drop Arm barrier has been designed with 

a Ultra Slim cabinet style and is fitted with 

industry leading Swiftdrive technology. 

It provides high speed combined with safety and 

convenient access even for special needs. 

Suited for application requiring medium levels of 

security. 

FEATURES 

• Ultra slim cabinet design 

• Fitted with industry leading SwiftDrive® 

• High speed, safe and convenient access 

• Allows for special needs access 

• Fitted with safety sensors for peace of mind 

The Dynamic Drop Arm Barrier 

compliments other speed gates 

systems supplied by Parcsafe. 

128 

www.parcsafe.com.au


INPUT VOLTAGE 

DRIVE 

MOTOR DETAIL 

GEARBOX 

MOTOR POWER SUPPLY 

OPERATING 

TEMPERATURE 

DUTY CYCLE 

OPENING SPEED 

CLOSING SPEED 

POWER FAILURE 

OPERATION 

COLLISION 

DETECTION 

SAFETY CONTROL 



100V – 240V AC ±10% at 50Hz 

SwiftDrive® 

BLDC, 24V DC, 100W 

Planetary 

27.6 V DC, 4.5A, 120W 

-15°C to +60°C 

100% - rated for continuous non-stop operation 

1 second (adjustable for slower operation) 

1.5 seconds (adjustable for slower operation) 

Supplied standard with battery backup (two 12V 7Ah batteries) 

Motor embedded hall sensors 

Two optical sensors 

• Integrates with all access control, ticketing and time & attendance systems 

• Triggered through a normally open dry contact. An extended trigger forces arm to 

stay down (fire alarm) 




DYNAMIC DROP ARM BARRIER 

39 8 

81 51 71 

81 51 71 

90 0 

97 5 


32 0 




TITAN TURNSTILE 

Full Height turnstile for High Security 

PS-PBTS-FH Turnstile 

The TITAN has been aesthetically designed as a 

full height high security turnstile for any 

perimeter entrance. 

With a 10 year warranty it is suited for application 

requiring high volume access and high levels of 

security in mining, factories, warehouses, schools, 

tertiary education, construction sites and stadiums. 

Suited with options for both internal and external 

application it is provided with a 3 arm (120 degress) 

solution in both a single and double configuration. 


130 

POWER SUPPLY 

FREQUENCY 


(STANDBY) 


(STANDBY) 


LOGIC VOLTAGE 

DIMENSIONS 

ROTOR DIAMETER 

ROTOR ARM 

CONFIGURATION 

ROTOR ARMS 

WEIGHT 

DESIGN 



50Hz / 60Hz 

0.25W (single turnstile) | 0.5W (double turnstile) - fail-secure mode 

50W (single turnstile) | 100W (double turnstile) - fail-safe mode 


24 Volt DC 

Single turnstile: 

• 1 400mm wide x 2 125mm high 

• 1 430mm wide x 2 250mm high – recommended minimum opening size 

Double turnstile: 

• 2 150mm wide x 2 125mm high 

• 2 180mm wide x 2 250mm high – recommended minimum opening size 

1 200mm 

3 arm (120º) | 4 arm (90º) 

50mm diameter tube arms spaced 120mm apart 

Single turnstile (4 arm): 160kg | Double turnstile (4 arm): 255kg 


pass through a standard door. Can be packed in broken-down form either onto a 

pallet or into a crate for transport. Flat pack version allows for greater space saving 

during transport. 

• Integrates with all access control and time & attendance systems 




www.parcsafe.com.au





POWER OPTIONS 

FLAT ROOF CANOPY 

OPTION 

SPECIAL PHYSICAL 

DESIGN OPTIONS 


FINISH OPTIONS 






• Each direction of rotation configurable for either fail-secure or fail-safe 

operation 

Free rotation when triggered indefinitely 

• Battery backup with two 12 volt 7Ah batteries connected in series 

– Up to 5 500 transactions in fail-secure mode 

– Up to 270 minutes operation in fail-safe mode 

• Solar panel with charge controller and battery system 

• Provides protection from the elements 

• Anti-climb protection 

• Low energy light on underside of canopy 

• Restrictor tubes for increased security (4 arm turnstile only) 

• 180º rotation setting for extra walkthrough space (4 arm turnstile only) 

• Special narrow single turnstile design for 1 200mm wide opening 

• Special split cover for low ceilings 

• Special internal mechanism dust cover for dirty environments 

• Heavy-duty base for portability (with forklift channels) 

• Card / proximity reader mounting bracket 

• Biometric / fingerprint reader mounting brackets 




• Mild steel with UV resistant polyester exterior powder coat finish (charcoal blue 

hammertone)* 

• Mild steel with hot dip galvanised finish** 



*suitable for highly corrosive environments (details available on request) 

**other colours available on request 

RELIABLE 

TECHNOLOGY 

DURABLE 

FEATURES 

GUARANTEED 

MANUFACTURED 

TO LAST 


• CE conformity 

• Ultra heavy-duty electromechanical 

rotation locking mechanism 


• Suspended rotor technology - 

eliminating stress on the base bearing 

• Self-centering rotation system - rotor 

returns to starting position after every 

rotation 

• Shock absorbing rubber coupling 

system 


• Ultra quiet, buffered solenoids and 

pawls 




• Tried, tested and perfected over a period of 

over 20 years 

• Anti-Trap® safety system - no mid-rotation 

locking or trapping in the event of a power 

failure 

• Programmable logic with user diagnostic 

features 

• Mechanical key override - clockwise and anticlockwise 

directions (fail-secure) 

• Case hardened locking disk and pawls - 

eliminating any wear 








6 

6 

9 

1 

1 

2 

2 

9 


4 

4 

3 

3 

1. Rotalok® 1 Rotalok® rotation rotation locking locking mechanism mechanism and and electronic 

1 Rotalok® 

electronic control 

rotation 

control panel panel - 

locking 

incorporates: 

mechanism and electronic 

- incorporates: 

control panel - incorporates: 

– Anti-Trap® • Anti-Trap® safety safety system system 

• Anti-Trap® safety system 

– Suspended • Suspended Rotor Rotor technology technology 

• Suspended Rotor technology 

– Mechanical • Mechanical override key override 

• Mechanical key override 

– Shock • Shock absorbing rubber rubber coupling coupling 

• Shock absorbing rubber coupling 

2. 2 2 Lockable Lockable top cover top cover 

3. 3 3 50mm 50mm diameter diameter tube tube arms arms spaced spaced 120mm 120mm 

120mm apart apart 

apart 

4 4 Access Access control control reader reader mounting mounting position position 

4. Access control reader mounting position 

5 5 Rotarun® Rotarun® perpetual perpetual base bearing base bearing 

5. 6 Rotarun® 6 Wiring Wiring side perpetual side entry entry point base point bearing 

6. 7 7 Wiring Wiring side bottom entry bottom entry point entry point point 

8 Floor bolting positions - 7 off 

7. Wiring 

8 Floor 

bottom 

bolting 

entry 

positions 

point 

- 7 off 

9 

9 

Wall 

Wall 

bolting 

bolting 

positions 

positions 

- 2 off 

- 2 off 

8. Floor bolting positions - 7 off 

9. Wall bolting positions - 2 off 

5 

5 

8 

8 

THE TITAN RANGE 

THE TITAN RANGE 

7 

7 

TITAN 3 SINGLE TITAN 3 DOUBLE TITAN 4 SINGLE 

TITAN 3 SINGLE TITAN 3 DOUBLE TITAN 4 SINGLE 

3 

3 

132 

www.parcsafe.com.au


Full Height turnstile for High Security PS-PBTS-FH Turnstile 

TITAN SINGLE RANGET 

TITAN DOUBLE RANGE 

A 

Recommended opening width1 430mm 

A 

Recommended opening width2 180mm 

B 

Turnstile width1 400mm 

B 

Turnstile width2 150mm 

C 

Recommended opening height 

2250mm 

C 

Recommended opening height 

2 250mm 

D 

Turnstile height 

2 125mm 

D 

Turnstile height 

2 125mm 

E Headroom 1 986mm 

E Headroom 1 986mm 

TITAN 3 SINGLE 

TITAN 3 DOUBLE 

A 

B 

A 

B 

ED 

C 

ED 

C 

TITAN 4 SINGLE 

TITAN 4 DOUBLE 

A 

B 

A 

B 

ED 

C 

ED 

C 

© Parcsafe 

Due to our policy of continuous improvement, products are subject to change without notice. 

Custom designs available on request 





134 

www.parcsafe.com.au


PEDESTRIAN ACCESS

136 

www.parcsafe.com.au

Ensuring your carpark or 

public space is safe and 

secure is a critical part of 

encouraging and maintaining 

repeat customers or clients. 




SAFEPACE EVOLUTION 

Comparison chart. 

Signs available in choice 

of four colors. 

EVOLUTION 

11 

EVOLUTION 

12 

EVOLUTION 

12FM 

EVOLUTION 

15 

EVOLUTION 

15FM 

EVOLUTION 

18FM 

Digit Size 279mm 305mm 305mm 381mm 381mm 457mm 

Digit Color Options 

Weight 

(without batteries) 

9kg 9kg 9kg 12.7kg 12.7kg 12.7kg 

24/7 Scheduling 

Data Collection 

Custom Messaging Full VMS Static “Slow Down” Full VMS Full VMS 

Messaging Color 

Options 

Solar Compatibility 

Battery Operated 

(Lead acid or Lithium ion) 

Universal Mounting 

Cloud Compatibility 

Trailer, Dolly, Hitch 

Compatibility 

Warranty 2 Years 2 Years 2 Years 2 Years 2 Years 2 Years 

138 

www.parcsafe.com.au

SAFEPACE EVOLUTION — WEB-ENABLED SIGNS 

EVOLUTION11 

• 279mm digits 

• 2 digit display 

• Budget friendly option 

EVOLUTION12 



• Speed-activated digit color 

changes 

EVOLUTION12FM 



• Display custom messages or 

graphics 


changes 

• Choice of messaging color 

• VMS SIGN 

EVOLUTION15FM 




graphics 


changes 


• VMS SIGN 

EVOLUTION15 




changes 

• Speed-activated red Slow 

Down message 

EVOLUTION18FM 




graphics 


changes 


• VMS SIGN 

ALL SAFEPACE EVOLUTION SIGNS COME WITH 1 YEAR CLOUD 

CONNECTIVITY INCLUDED 

With the ability to connect to and control your signs from any internet connected device, the 

SafePace Cloud adds a whole new level to intelligent traffic control. 

SMARTER SIGNS WITH THE CLOUD 

Set-up automated alerts for 

speeding thresholds, low 

battery, or tampering. 

Manage entire fleet of signs 

from one computer. 

View at-a-glance updates, 

access real-time data, and 

generate reports. 


View all your signs from one 

screen using our interactive 

mapping tool. 

No software install, no 

hardware required, access traffic 

data from anywhere, anytime. 

Ooptimize resources by 

reducing travel time required 

for sign management. 



SAFEPACE GUARDIAN 

SPEED CAMERA SYSTEMS 

The Guardian Awareness, Guardian Standalone, and Guardian Pro speed cameras capture images 

of speeding vehicles using either Radar or LEDDAR Technology. Cloud based ticketing template sends 

automated messages to warn or penalize speed violators. 

GUARDIAN AWARENESS 

• Integrates with all SafePace signs 

• One-lane image capture 

• Fixed installation 

• Issue warnings to speeders 

GUARDIAN PRO 

• Standalone system 

• Multiple lane image capture 

• Fixed or mobile installation 


All your devices can be accessed & 

managed at the click of a button with 

SafePace Cloud 

All cameras available in 

GUARDIAN STANDALONE 

• Discreet camera solution 

• One-lane image capture 

• Fixed installation 


GUARDIAN AWARENESS GUARDIAN STANDALONE GUARDIAN PRO 

Technology Radar Radar LEDDAR 

Type of Environment 

Single Lane - low/ medium 

volume 

Single Lane - low/ medium 

volume 

Multi Lane - low to high volume 

Licence plate recognition Optional Optional Included 

Front/Rear image capture Front Front or Rear Front or Rear 

140 

www.parcsafe.com.au

SAFEPACE EVOLUTION — ACCESSORIES & OPTIONS 

SIGN DOLLY 

Deploy your SafePace 

Evolution signs in multiple 

locations. 

• Indoor/outdoor usage 

• Lightweight & easy to 

transport 

• Simply locks into place 

TRAILER HITCH 

Allows signs to be mounted 

directly on vehicle. 

• • Mount signs on vehicle 

trunk 

• For temporary speed display 

• Ideal for hazard zones or 

special events 

MOUNTING BRACKETS 

• Lock and unlock with turn of 

a key 

• Use one sign at several 

locations 

• Quick and easy to install 

CRUISER LT 

Rotating speed trailer for 

traffic calming on the go. 

• Display speeds from any 

angle 

• Protects sign face during 

travel 

• Mobile traffic calming 

VARIABLE MESSAGING 

For signs with the custom messaging option, create any message you choose using text or 

graphics. Messages can be customized to respond to driver behavior and can change based 

on vehicle speed. They can also be set to change based on roadwork or school scheduling and 

updated to notify drivers of road changes. 



Notes 

142 

www.parcsafe.com.au


Notes 

144 

www.parcsafe.com.au


Notes 

146 

www.parcsafe.com.au


Notes 

148 

www.parcsafe.com.au


1300 987 645 

www.parcsafe.com.au

PARCsafe_catalogue

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?