SMG Catalogue Issue 45 26.01.20

BUFFERS & MULTIPLEXERS
PRO-MUX-1 Professional NMEA 0183 Mulplexer
005-PROMUX1BASR Pluggable screw terminals £633.84
005-PROMUX1BASS Pluggable screwless terminals £633.84
The PRO-MUX-1 is reliable, robust and provides industry leading isolaon on all inputs and outputs as standard, so that
connected devices safely avoid hazardous ground loops, the number 1 cause of product failure in NMEA 0183 networks.
The eight NMEA 0183 inputs can be routed to any of the six NMEA 0183 outputs, providing a highly customisable network.
A bi-direconal serial port and an Ethernet port allow for simple configuraon and diagnoscs using Acsense soware.
The configuraon tool is accessible via any popular web browser (using the Ethernet port) so there are no PC operang
system compability issues to contend with. Using the web based configuraon tool will allow the user to finely tune the
exact data available on each output. The default setup is for all data to go to all outputs.
● 8 OPTO-isolated NMEA 0183 inputs
● 6 ISO-Drive NMEA 0183 outputs
● Bi-direconal isolated serial port (can be used for
addional NMEA 0183 input/output)
● Ethernet port
● Alarm output (N/O and N/C contacts)
● Designed for 12 and 24 Volt supply
● Isolaon to baery supply
● Configurable input and output baud rates for rate
conversion
● Data combining from any input to any output
● 2 independent Autoswitch virtual inputs with priority
● Advanced sentence based filtering / roung
● Diagnosc LEDs on all inputs and outputs
● Alarm, mode and Bi-colour Status LED’s
● 2 part pluggable connector system supports both screw
and screwless terminals
● DIN rail or Panel mountable
● Advanced stascs are available via a Web Browser
Use with USBKIT-PRO for
USB connectivity
PRO-BUF-1 Professional NMEA 0183 Intelligent Buffer
005-PROBUF1BASR Pluggable screw terminals £610.58
005-PROBUF1BASS Pluggable screwless terminals £610.58
Adaptable NMEA 0183 Buffer with a variety of operang modes. Provides two OPTO-isolated inputs and twelve ISO-
Drive outputs, keeping devices safe from hazardous ground loops.
PRO-BUF-1 enables safe connecon of all devices with industry leading isolaon prevenng hazardous ground loops.
Two NMEA 0183 inputs, twelve NMEA 0183 outputs, a bi-direconal serial port and an Ethernet port, the PRO-BUF-1 is
a perfect soluon for large networks on commercial shipping and leisure vessels. Designed to suit the majority of NMEA
0183 systems and ready to go ‘out of the box’ by simply hard-wiring the two mode inputs as required which can drascally
reduce installaon me with no complicated setup required. Configurable via the web browser based configuraon tool,
allowing customisaon of the PRO-BUF-1.
● 2 OPTO-isolated NMEA 0183 inputs
● 12 ISO-Drive NMEA 0183 outputs
● Bi-direconal isolated serial port (can be used for
addional NMEA 0183 input/output)
● Ethernet port
● Alarm output (N/O and N/C contacts)
● Designed for 12 and 24 Volt supply
● Isolaon to baery supply
● Browser based configuraon tool
● Automac baud rate matching on inputs
● Independently configurable outputs provides data
combining and autoswitching of inputs
● Alarm and Mode LED’s
● 2 part pluggable connector system supports both screw
and screwless terminals
● DIN rail or Panel mountable
● Advanced stascs are available via a Web Browser
NDC-5 NMEA DATA Mulplexer
005-NDC-5 £369.40
The reliable mulplexing that you would expect, with the addion of an Ethernet port for
configuraon and diagnoscs. Advanced filtering gives exacng control of the data available
on each output.
● Ethernet port for configuraon,
diagnoscs & sharing NMEA 0183 data
(future update)
● 5 OPTO-Isolated NMEA 0183 inputs
● 2 ISO-Drive NMEA 0183 outputs
● Advanced Data Filtering/Roung
● Configure input & output baud rates
● Autoswitch mode available to offer
system redundancy
● Serial port for configuraon, diagnoscs
or as an addional NMEA 0183 input/
output
● Free firmware updates
● Diagnosc LEDs on all inputs and
outputs plus LEDs to indicate Alarm
status, Mode, Bi-colour status
● DIN rail or Panel mountable
● Pluggable screw terminal connectors for
quick and easy installaon
Talkers
IN
IN
IN
IN
12v
IN/OUT
IN
IN/OUT
OUT
Listeners
NBF-3 NMEA Buffer
005-NBF3BAS £261.36
ACTISENSE
Isolates and buffers NMEA 0183 data, with the power to drive mulple
devices. The addion of power distribuon for the NMEA talker, means
power and data are from the same source, reducing cabling requirements.
Isolaon on the input and each of the outputs ensures protecon of the
source talker device and all the listening devices.
● Pluggable screw terminals
● Power and input indicator LEDs
● Galvanic opto-isolated input
● 6 ISO-Drive outputs
● Din Rail mountable
88
www.smgeurope.com 01752 241010 sales@smgeurope.com