SMG Catalogue Issue 45 26.01.20

ELECTRICAL MONITORING AND CONTROL
ACM100 Alternang Current Monitor
468-ACM100-01 Alternating Current (AC) Monitor £493.80
468-M000630 100 Amp AC Transducer with Cable £58.80
468-M000612 400 Amp AC Transducer with Cable £262.80
Monitors AC power sources and outputs
informaon onto the NMEA 2000 network.
● Single phase, split phase or 3-phase
AC Sources
● Monitoring of busses carrying AC
power and transming:
- Voltage
- Frequency
● Monitoring AC Power sources such as ulies and generators and transming:
- Voltage
- Current
- Frequency
- Real Power
- Reacve Power
- Apparent Power
- Power Factor
- Total Energy Imported
- Total Energy Exported
M000612
M000630
DCM100 Direct Current Monitor
468-DCM100-01 Direct Current Monitor £493.80
468-FC01 DCM100 Battery Harness with Fuse £39.88
468-LEMHTA200-S 200 Amp Current Transducer with Cable £97.20
468-LEMHTA400-S 400 Amp Current Transducer with Cable £147.60
468-LEMHTA600-S 600 Amp Current Transducer with Cable £193.80
468-TR3K DCM100 Ring/Under Bolt Temperature Probe £25.20
Measures the voltage and current of any direct
current (DC) power source or loads, including
baeries, alternators, solar panels, wind generators,
inverters, windlasses, DC refrigerators, or any DC
branch circuit. Hall effect current sensor just simply
slips over the wire.
● Informaon monitored:
- Baery Voltage
- Baery Current
- Ripple Voltage
- Baery Case Temperature
- State of Charge
- Time Remaining
- Charge Efficiency Factor
FC01 LEMHTAx00-S TR3K
DCR100 Direct Current Relays
468-DCR100-01 Direct Current Relays £392.40
Contains 6 Direct Current (DC) relays,
each capable of switching up to 10 amps.
Connects directly to an NMEA 2000
network, so you can turn on and off the
relays from any device onboard.
Can handle resisve DC loads like lights,
or inducve DC loads like pumps and
motors, and can also be used to switch
AC circuits using external relays.
● Six relays for On/Off control over NMEA
2000® Network
● Each relay capable of carrying up to 10 amps
● Individual relay electrical current monitoring
● Automac relay over current shutdown
(shuts down at ≈ 12 amps)
● Automac relay thermal shutdown (over
temperature protecon)
● Relays switchable using Maretron DSM
Series, N2KView®, or N2KView® Mobile
● DCR100 can be configured as an
annunciator to acvate a buzzer, horn, or
strobe light as a result of an alert
● Individual DCR100 channels can be locked
into On/Off state
● Individual DCR100 channels can be
configured with default power up state (e.g.,
On/Off/Previous)
RIM100 Run Indicator Module
468-RIM100-01 Run Indicator Module £295.20
468-WIF-RK30880-E Water in Fuel Detector £180.00
MARETRON
Monitors both AC and DC electrical
circuits whether or not the electrical
circuit is energized and running. Can
also monitor manually switched loads
(running lights, anchor lights, or deck
lights) or auto switched
loads (bilge pumps, engine exhaust/
intake fans, and transfer pumps).
● Monitors and reports the running
statuses of six independently
connected devices
● Works with both AC and DC loads
● Works with both automacally and
manually switched loads
● Includes built in mers and counters so
you know how long
● Can indicate the status of a wide variety of loads
- Bilge Pumps
- Winches
- Running Lights
- Transfer Pumps
- Exhaust/Intake Fans
- Water in Fuel noficaon
96
www.smgeurope.com 01752 241010 sales@smgeurope.com