SMG Catalogue Issue 45 26.01.20

SMARTER • SAFER • SIMPLIFIED SOLUTION FOR INCREASED PERFORMANCE
The M-POWER distributed power control and monitoring system puts the user in control while providing greater safety and reliability in an easy to operate
system. This flexible-to-configure system includes devices such as mul-funcon touchscreen display, configurable keypad, mulplex switch module, solidstate
power controller, bypass module, and AC distributed power module. Together, these devices provide:
● Easy installaon and reduced wiring complexity
● Intuive and easy to use HMI modules
● Extensive load monitoring capabilies
● Remotely controlled AC distributed power unit
● Bypass module for manual control of the crical loads
Addionally, the M-POWER system is NMEA2000 cerfied, and it can interface with N2KView® soware* with remote monitoring capabilies for ease of
use and any-me accessibility to the system status.
CLMD MPower Mul-Channel DC Load Module
468-CLMD12 DC Load Module, 12 channel (NMEA2000) £504.00
468-A3706 MPower CLMD12 J1 Output cable £38.40
468-A3707 MPower CLMD12 J2 Input cable £28.80
● Turn breakers on and off via NMEA 2000® network from a Maretron DSM-Series
display or any device running Maretron N2KView®
● Offers programmable mul-channel DC electronic load modules in an innovave,
scalable configuraon
● NMEA 2000® Interface
● IP67 Rated
● Ignion Protected
● Opto-Isolated from NMEA 2000®, eliminang potenal ground loops
● Individual breaker electrical current monitoring
● Breakers can have power-up states defined (ON, OFF, or previous states)
● Lock breakers against inadvertent actuaon
● Automac ECB overcurrent shutdown and
thermal shutdown (Overtemperature Protecon)
● Capacive touch switches for local control of all loads
● All inputs and outputs protected against short to Power and short to Ground
CLMD12 Features
● Twelve (12) dimmable Electronic
Circuit Breakers
● Each breaker is capable of carrying
up to 5, 10, or 12 Amps with a total
current capacity of 75A
CBMD12 MPower 12-Channel Bypass Module
468-CBMD12 Bypass Module 12 circuit (NMEA2000) £204.00
468-A3720 Bypass module jumper wire with lugs, 6AWG, Red £8.40
● Provides manual control of the loads in case of
system failures when used in conjuncon with
CLMD12
● 75A max current capacity
● Carling Technologies Curvee® Rocker switches
● Overcurrent protecon via ATC standard fuses
● Outputs
- 12A max (two outputs)
- 10A max (six outputs)
- 5A max (four outputs)
● 12 & 24 VDC power systems
VM Series Mulplexed Switch Module
468-VMM-00000008 12 Rocker, No Actuators £78.00
468-VMM-00000007 6 Rocker, No Actuators £79.20
468-A3702 VMM to NMEA 2000 Adapter Cable - 0.2m £39.60
CKM12 Customizable Keypad
468-CK2-00000006 12 Button Keypad, ring on button £120.00
468-CK2-00000007 12 Button Keypad, number in center of ring £120.00
468-A3703 CKM to NMEA 2000 Adapter Cable - 0.2m £39.60
MARETRON
● Sealed, mulplexed switch module featuring the Carling V-Series Contura® rocker
switch styles
● Reduces the complexity and cost of tradional wiring harnesses, increases product
life and reliability, and reduces installaon me
● NMEA 2000® CAN Protocol
● IP68 Sealing Protecon with Connector
● Configurable
● Horizontal or Vercal Mounng Opons
● Customizable keypad featuring laser-etched legends and dimmable LED funcon
lights for each buon
● LEDs aid in diagnosing fault condions
● Low-profile design
● Vercal or horizontal mounng
● NMEA 2000® CAN Protocol
● IP69 Front Panel Sealing Protecon
● 1,000,000+ Buon Actuaon Cycles
● Low Current Switching
● Tacle and Audible Feedback
92
www.smgeurope.com 01752 241010 sales@smgeurope.com