13.04.2021 Views

Moorea I brochure_3.0

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>Moorea</strong> I Condensing Water Heaters<br />

Features<br />

• Very high efficiency up to 108 %<br />

• Wide modulation range<br />

• No capacity constraints<br />

• Low pollution discharges<br />

• Small footprint & weight limits<br />

• Install up to 16 water heaters in cascade<br />

• Very quiet operation<br />

Advantages<br />

• Outputs available from 125 to 610 kW<br />

• Maximum energy utilisation<br />

• Efficiency of up to 108% net (97.5% gross)<br />

• High modulation range from 16% to 100% of<br />

nominal output (6.25 to 1)<br />

• Heat exchanger profile designed to ensure highly<br />

efficient heat transfer<br />

• Compact dimensions and small footprint<br />

• Lightweight aluminium/silicon heat exchanger<br />

• Top mounted hydraulic and flue connections<br />

revised<br />

• Easier to connect and less space needed for<br />

working access<br />

• NOx 35mg/kWh<br />

Application Examples<br />

Cascade without<br />

booster pump<br />

Not to be used if there are<br />

any high temperature circuits<br />

60/80 °C (no instant DHW) the<br />

motorised 2-channel valves<br />

isolate the water heaters when<br />

they are not operating. On<br />

start up the water heaters are<br />

blocked until their respective<br />

isolating valves are fully open. The<br />

Cascade function is integrated<br />

and a BUS module just needs to<br />

be added to each water heater<br />

regulator.<br />

<strong>Moorea</strong> I HTE<br />

125-610<br />

Hot Water<br />

Tank<br />

Optimising the condensing<br />

"Cold" returns are used more,<br />

Thanks to the buffer tank, short<br />

cycles at high temperature are<br />

made smoother: loop losses, low<br />

drawing. The time for the water<br />

heater to reach its temperature<br />

is covered by the buffer tank; the<br />

tank's contents must be at least<br />

2.5 l /kW of installed power at<br />

high temperature.<br />

<strong>Moorea</strong> I HTE<br />

125-610<br />

Primary Buffer Tank<br />

Automatic Heating 3

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!