FSB Full Hardware Collection

More documents

Recommendations

Info

Technical information Roses and backplates FSB ASL® kit Roses with concealed fixing The metal cover roses fit over bases made partly of metal, partly of plastic, with two stabiliser lugs (diameter 9 mm, length 6 mm) in the attachment area; screw centres 38 mm. Short and long backplates with concealed fixing Short and long backplates with concealed fixing operate with bases design-engineered in the same manner as those for roses, but with a stabiliser lug diameter of 10 mm and length of 5.5 mm. FSB door hardware should always be fitted in conjunction with its companion FSB accessories. Further information about the FSB bearings can be found on page 52 ff. FSB roses and backplates Backplates with visible fixing Apart from a visible screw with which to secure the backplate, standard short backplates with visible fixing have two stabiliser lugs beneath the handle bushing that prevent lateral displacement on the surface of the door. Standard long backplates are fixed to the door with four visible screws. The screw holes are suitable for 3.9 mm countersunk screws. 386 FSB Manual No. 14
Technical information Roses and backplates Centres (c:c distances) The standard c:c distance for room-door backplates is 72 mm (WL and PC), for bathroom-door backplates 78 mm and for entrance-door backplates 92 mm (WL and PC). The distances are measured as follows: 1. Warded lock and Chubb Centre of follower to centre of key pin 2. Profile cylinder Centre of follower to centre of cylinder plug 3. Oval cylinder Centre of follower to centre of oval cylinder 4. Round cylinder Centre of follower to centre of round cylinder 5. Emergency release Centre of follower to centre of emergency release 6. WC Centre of follower to centre of emergency release with indicator 7. Thumb turn Centre of follower to centre of thumb turn 1 2 3 4 5+6 7 5 Keyways Unless otherwise specified, we supply backplates and rosettes with warded lock (WL) keyways. WL CH PC OC CH-RC fsb.de/catalogue 387
Page 1:
Manual No. 14 Door and window hardw
Page 5 and 6:
Contents 2 6 8 10 12 14 32 38 43 44
Page 7:
Introduction 1 Good architecture is
Page 10 and 11:
Made in Brakel, Germany It's in you
Page 12 and 13:
The FSB DNA Quality you can touch Q
Page 14 and 15:
FSB Handmade Your ideas take shape
Page 16 and 17:
FSB Care Our experience - your safe
Page 18 and 19:
Materials and finishes High-class m
Page 20 and 21:
Materials and finishes Aluminium FS
Page 22 and 23:
Materials and finishes Blasted alum
Page 24 and 25:
Materials and finishes Aluminium +
Page 26 and 27:
Materials and finishes Stainless St
Page 28 and 29:
Materials and finishes Bronze FSB 7
Page 30 and 31:
Materials and finishes Bronze fitti
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
32 FSB Manual No. 14
Page 39 and 40:
Bathroom hardware ErgoSystem® A100
Page 41 and 42:
FSB ErgoSystem®: unparalleled comf
Page 43 and 44:
2 2 1 Flexibility With A-Flex, FSB
Page 45 and 46:
Seats Suspended seats Tip-up shower
Page 47 and 48:
Bathroom hardware METRIC® Overview
Page 49 and 50:
2 1 2 3 4 5 6 7 8 the assembly proc
Page 51:
Shower rails Shower rails Shower at
Page 55 and 56:
Bearing and adaptor technology 3 52
Page 57 and 58:
The FSB adaptor system is not a bea
Page 59 and 60:
Turnably fixed adaptor Transferring
Page 61 and 62:
Turnably fixed adaptor Low-friction
Page 63:
Heavy-duty version The FSB AGL® is
Page 66 and 67:
Technical information EN 1906 fitti
Page 68:
Technical information EN 1906 fitti
Page 73 and 74:
Product collections 4 70 72 76 315
Page 75 and 76:
Around 50 different door handle mod
Page 77 and 78:
FSB 1004 | 1134 Composition of FSB
Page 79 and 80:
Handing details Doors can be hung t
Page 81 and 82:
Heavy-duty FSB Select Aluminium Sta
Page 83 and 84:
Heavy-duty FSB Select Aluminium Sta
Page 85 and 86:
Lever handle with privacy function
Page 87 and 88:
Glass door fitting 13 4220 with 10
Page 89 and 90:
Lever/knob sets Broad backplate set
Page 91 and 92:
Page 93 and 94:
WC sets 12 1003 045 (N) Broad backp
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Lever/knob sets 12 1005 017 (N) Bro
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
WC sets 12 1051 019 (N) 15 1051 019
Page 145 and 146:
Page 147 and 148:
WC sets 12 1058 019 (N) 15 1058 019
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
WC sets 10 1135 | 14 1425 17554 15
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
WC sets Broad backplate sets availa
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
Page 303 and 304:
Page 305 and 306:
Page 307 and 308:
Page 309 and 310:
Page 311 and 312:
Page 313 and 314:
Page 315 and 316:
Page 317:
Numbers and number holder 38 4006 0
Page 320:
Technical information WC roses WC s
Page 323:
Customised product configuration 5
Page 326 and 327:
Customised product configuration FS
Page 328 and 329:
Customised product configuration FS
Page 331 and 332:
327 FSB ASL® kit
Page 333 and 334:
Aluminium Stainless steel Bronze Do
Page 335 and 336:
FSB ASL® kit Square roses Aluminiu
Page 337 and 338:
FSB ASL® kit Oval backplates Alumi
Page 339 and 340: FSB ASL® kit Angular backplates Al
Page 341 and 342: FSB ASL® kit Oval knob backplates
Page 343 and 344: FSB ASL® kit Doorknobs for back-to
Page 351 and 352: FSB ASL® kit Female knob handles A
Page 353 and 354: FSB ASL® kit Accessory bags for sh
Page 355: FSB ASL® kit Accessory bags for le
Page 358 and 359: FSB roses and backplates kit Overvi
Page 360 and 361: FSB roses and backplates kit Overvi
Page 362 and 363: FSB roses and backplates kit Oval b
Page 364 and 365: FSB roses and backplates kit Broad
Page 366 and 367: FSB roses and backplates kit Cut ro
Page 368 and 369: FSB roses and backplates kit Cut ba
Page 370 and 371: FSB roses and backplates kit Backpl
Page 372 and 373: FSB roses and backplates kit Round,
Page 374 and 375: FSB roses and backplates kit Knob b
Page 376 and 377: FSB roses and backplates kit Roses
Page 378 and 379: FSB roses and backplates kit Securi
Page 380 and 381: FSB roses and backplates kit Doorkn
Page 382 and 383: FSB roses and backplates kit Doorkn
Page 384 and 385: FSB roses and backplates kit Female
Page 386 and 387: FSB roses and backplates kit Lockab
Page 389: 385 Technical information Customise
Page 393 and 394: Technical information Backplates Ba
Page 395: Technical information Flush-fitted
Page 399 and 400: Fittings for doors and windows 6a 3
Page 401 and 402: PIV certification under EN 1906, gr
Page 403 and 404: For the complete product code, simp
Page 405: Aluminium Stainless steel Bronze 15
Page 408 and 409: Technical information Plug-in handl
Page 411 and 412: Fittings for doors and windows 6b 4
Page 413 and 414: Click-stop mechanism ensures tangib
Page 415 and 416: For the complete product code, simp
Page 418 and 419: Fittings for windows Overview Windo
Page 420 and 421: Fittings for windows Overview Windo
Page 422 and 423: Fittings for windows Overview Tee h
Page 424 and 425: Fittings for windows Overview Lifti
Page 426 and 427: Fittings for windows Tee handles fo
Page 428 and 429: Fittings for windows Tee handles fo
Page 430 and 431: Fittings for windows Window handles
Page 432 and 433: Fittings for windows Lockable windo
Page 440 and 441:
Fittings for windows Lockable windo
Page 442 and 443:
Fittings for windows Budget lock ro
Page 444 and 445:
Fittings for windows Parallel slide
Page 446 and 447:
Fittings for windows Lifting/slidin
Page 448 and 449:
Page 450 and 451:
Page 452 and 453:
Page 454:
Fittings for windows Recessed handl
Page 458 and 459:
Technical information Fittings for
Page 460 and 461:
Page 462 and 463:
Technical information Fixing system
Page 464 and 465:
Technical information Fixing system
Page 467 and 468:
Fittings for doors and windows 6c 4
Page 469 and 470:
1.5 million operating cycles tested
Page 471 and 472:
For the complete product code, simp
Page 473 and 474:
Product features of lever handles f
Page 475 and 476:
Aluminium Stainless steel Bronze 06
Page 477 and 478:
Aluminium Stainless steel Bronze Ba
Page 479 and 480:
Page 481 and 482:
Fittings for narrow-stile doors Lev
Page 483 and 484:
Fittings for narrow-stile doors Doo
Page 485 and 486:
Page 487 and 488:
Page 489 and 490:
Fittings for narrow-stile doors Sli
Page 491:
Fittings for narrow-stile doors Lev
Page 494 and 495:
Page 496 and 497:
Page 498 and 499:
Technical information Spindles for
Page 501 and 502:
Fittings for doors and windows 6d 4
Page 503 and 504:
Fittings with consistent design for
Page 505 and 506:
Heavy-duty variant Glass door fitti
Page 507 and 508:
Aluminium Stainless steel Bronze Gl
Page 509 and 510:
Fittings for glass doors Compact st
Page 511 and 512:
Fittings for glass doors Strike box
Page 513 and 514:
Fittings for glass doors Glass-door
Page 515 and 516:
Page 517 and 518:
Page 519 and 520:
Fittings for glass doors Round glas
Page 521 and 522:
Fittings for glass doors Doorknobs
Page 523:
Fittings for glass doors Sliding do
Page 526 and 527:
Technical information Glass door me
Page 528 and 529:
Technical information Receivers for
Page 531 and 532:
Fittings for doors and windows 6e 5
Page 533 and 534:
Emergency release device on the out
Page 535 and 536:
Page 537:
Aluminium Stainless steel Bronze 11
Page 540 and 541:
Flush-fitted hardware Product varia
Page 542 and 543:
Flush-fitted hardware Flush-fitted
Page 544 and 545:
540 FSB Manual No. 14
Page 547 and 548:
Fittings for special-function doors
Page 549 and 550:
Simple and tool-free installation:
Page 551 and 552:
Product features of sliding door ha
Page 553 and 554:
Aluminium Stainless steel Bronze Sl
Page 555 and 556:
Fittings for sliding doors Rectangu
Page 557 and 558:
Fittings for sliding doors Square s
Page 559 and 560:
Fittings for sliding doors Sliding
Page 561 and 562:
Fittings for sliding doors Sliding
Page 563 and 564:
Fittings for sliding doors Sliding-
Page 565 and 566:
Fittings for sliding doors Mortise
Page 567 and 568:
Fittings for sliding doors Angular
Page 569 and 570:
Fittings for sliding doors Round sl
Page 573 and 574:
569 Technical information Fittings
Page 575 and 576:
Technical information Routing dimen
Page 577 and 578:
Page 579:
Page 582 and 583:
Recessed lever handles Added value
Page 584:
Recessed lever handles Overview Alu
Page 587 and 588:
Recessed lever handles conforming t
Page 589 and 590:
Recessed lever handles With corner
Page 591:
Recessed lever handles Flush ring h
Page 594 and 595:
Fittings for emergency exit and pan
Page 596 and 597:
Page 598 and 599:
Page 600 and 601:
Page 602 and 603:
Page 604 and 605:
Page 606 and 607:
36 50 Fittings 58 for emergency exi
Page 608 and 609:
Page 610 and 611:
Page 613 and 614:
609 Technical information Fittings
Page 615:
Technical information EN 179 for em
Page 618 and 619:
XXL door handles Added value at a g
Page 620:
XXL door handles Overview Aluminium
Page 623 and 624:
XXL door handles FSB 1118 | FSB 111
Page 625 and 626:
XXL door handles FSB 1287 Aluminium
Page 627:
XXL door handles Barrier-free fitti
Page 631 and 632:
Entrance door hardware 8a 626 634 6
Page 633 and 634:
In addition to door pulls, FSB offe
Page 635 and 636:
Page 637 and 638:
Page 639 and 640:
Fittings for entrance doors Push/pu
Page 641 and 642:
Fittings for entrance doors Push/pu
Page 643 and 644:
Fittings for entrance doors Order f
Page 645 and 646:
Page 647 and 648:
Fittings for entrance doors Angular
Page 649 and 650:
Fittings for entrance doors Oval do
Page 651 and 652:
Page 653 and 654:
Page 655 and 656:
Page 657 and 658:
Fittings for entrance doors Oval ht
Page 659 and 660:
Fittings for entrance doors Door-pu
Page 661 and 662:
Fittings for entrance doors Round d
Page 663 and 664:
Page 665 and 666:
Page 667 and 668:
Page 669 and 670:
Page 671 and 672:
Page 673 and 674:
Page 675 and 676:
Page 677 and 678:
Page 679 and 680:
Page 681 and 682:
Fittings for entrance doors Door pu
Page 683 and 684:
Fittings for entrance doors Door-pu
Page 685 and 686:
Fittings for entrance doors Half-ro
Page 687 and 688:
Fittings for entrance doors Half-se
Page 689 and 690:
Fittings for entrance doors Half-se
Page 691:
Fittings for entrance doors Letter
Page 694 and 695:
Technical information Door pulls Qu
Page 696 and 697:
Technical information Drilling dime
Page 698 and 699:
Technical information Fixing door p
Page 700 and 701:
Page 702 and 703:
Page 704:
Technical information Letter plates
Page 708 and 709:
Door pulls with Fingerscan Added va
Page 710 and 711:
Door pulls with Fingerscan Round FS
Page 712 and 713:
Page 714 and 715:
Page 717 and 718:
Entrance door hardware 8c 712 720 7
Page 719 and 720:
Certified under EN 1906 or DIN 1825
Page 721 and 722:
Page 723 and 724:
Aluminium Stainless steel Bronze Se
Page 725 and 726:
Security fittings Backplate set Alu
Page 727 and 728:
Security fittings Short backplate s
Page 729 and 730:
Security fittings Long backplate se
Page 731 and 732:
Page 733 and 734:
Page 735 and 736:
Page 737 and 738:
Page 739 and 740:
Security fittings Sets for narrow-s
Page 741 and 742:
Security fittings Security roses fo
Page 743 and 744:
Security fittings Security roses fo
Page 745:
Security fittings Flush-fitted secu
Page 748 and 749:
Technical information Security fitt
Page 750:
Technical information Flush-fitted
Page 755 and 756:
Accessories 9a 750 Door stops
Page 757:
Door stops Aluminium Stainless stee
Page 760 and 761:
Spindles, fixing material and acces
Page 762 and 763:
Page 764 and 765:
Page 766 and 767:
Page 768 and 769:
Page 770 and 771:
Page 772 and 773:
Page 774 and 775:
Page 777 and 778:
Accessories 9c 772 Routing jigs and
Page 779 and 780:
Routing jigs and fixing equipment U
Page 781 and 782:
Routing jigs and fixing equipment T
Page 783 and 784:
Page 785 and 786:
Routing jigs and fixing equipment R
Page 787 and 788:
Routing jigs and fixing equipment R
Page 789 and 790:
Page 791:
Page 794 and 795:
Appendix FSB contact persons + loca
Page 796 and 797:
Appendix General index Flexible/dep
Page 798 and 799:
Appendix Index of product groups 03
Page 800 and 801:
Appendix Product code index Product
Page 802:
Appendix Product code index Product
show all

FSB Full Hardware Collection

Create successful ePaper yourself

Delete template?

Save as template?