FSB Full Hardware Collection

Technical information
Glass door measurements pursuant to DIN 18101
Glass cut-outs for series 13 4220 – 13 4224
The glass door fittings and strike boxes are
pre-fitted: series 13 4220 and 13 4223 for
glass door thicknesses 8 and 10 mm, and
series 13 4224 for 8 mm.
Profile cylinder
Profile cylinders with lengths of 25/25 mm or
27.5/27.5 mm are recommended owing to the
small projection achieved. Profile cylinders
25/25 mm must be checked on a case-bycase
basis to ensure they are compatible with
the locking system.
834 with frame measuring 841
834 with frame measuring 841
214.5
237
35.5
Hinge reference line
232
237
35.5
Hinge reference line
16
45
1972 with frame measuring 1983
16
45
1972 with frame measuring 1983
57
57
1435
1435
1435
80
1435
80
50
50
960
960
35.5
Hinge reference line
35.5
Hinge reference line
45
45
16
16
13 4227 00101
13 4228 00101
13 4227 00103 | 13 4227 04104 (R) | 13 4227 05104 (L)
13 4228 00103 | 13 4228 04104 (R) | 13 4228 05104 (L)
Approximate carcass dimensions 750 × 2000 mm 875 × 2000 mm 1000 × 2000 mm
Frame rebate dimensions 716 × 1983 mm 841 × 1983 mm 966 × 1983 mm
Standard glass dimensions 709 × 1972 mm 834 × 1972 mm 959 × 1972 mm
Approximate carcass dimensions 750 × 2125 mm 875 × 2125 mm 1000 × 2125 mm
Frame rebate dimensions 716 × 2108 mm 841 × 2108 mm 966 × 2108 mm
Standard glass dimensions 709 × 2097 mm 834 × 2097 mm 959 × 2097 mm
522 FSB Manual No. 14