FSB Full Hardware Collection

Spindles, fixing material and accessories
Half-spindles for flush doors
05 0115 | 05 0116
FSB half-spindles
for doors with bolt through-fixing, not suitable for locks
with self-tightening follower, for female lever handles and
knobs in combination with:
– FSB ASL® sets
– FSB AGL® sets
– Security fittings
– Backplates with visible fixing
– Cut roses and backplates
– Broad backplates/renovation backplates
Cavity
dimension (X)
05 0115 00710 7 × 60 mm 20 – 24 mm
05 0115 00714 7 × 70 mm 30 – 34 mm
05 0115 00810 8 × 60 mm 20 – 24 mm
05 0115 00812 8 × 65 mm 25 – 29 mm
05 0115 00814 8 × 70 mm 30 – 34 mm
05 0115 00816 8 × 75 mm 35 – 39 mm
05 0115 00818 8 × 80 mm 40 – 44 mm
05 0115 01010 10 × 60 mm 20 – 24 mm
05 0115 01012 10 × 65 mm 25 – 29 mm
05 0115 01014 10 × 70 mm 30 – 34 mm
05 0115 01016 10 × 75 mm 35 – 39 mm
05 0115 01018 10 × 80 mm 40 – 44 mm
05 0115 01022 10 × 90 mm 50 – 54 mm
05 0115 01026 10 × 100 mm 60 – 64 mm
05 0116 01012 8/10 × 65 mm 25 – 29 mm*
05 0116 01014 8/10 × 70 mm 30 – 34 mm*
05 0116 01016 8/10 × 75 mm 35 – 39 mm*
05 0116 01018 8/10 × 80 mm 40 – 44 mm*
05 0116 01022 8/10 × 90 mm 50 – 54 mm*
05 0116 01026 8/10 × 100 mm 60 – 64 mm*
X
* stepped, 8 mm handle perforation / 10 mm lock follower
9b
Base your selection of the right FSB half-spindle on
the cavity dimension (X). The cavity dimension (X) is
the distance from the top edge of the backplate or
rose shank to the top edge of the lock follower.
fsb.de/catalogue
765