Specialty Automotive Hand Tools – SP Tools Schley Products

••••••••UNIVERSAL TOOLS••••••••
BELT IT
"Serpentine, V-belt and Timing Belt installation assist"
This time saving tool gives the technician the control and reach when installing serpentine
belts in all applications. The tool was also designed to help install V-belts and timing belts
that tend to be placed in areas that are difficult to reach. The three pin design gives the
technician convenient belt push/pull capability and the handle gives the technician the
twisting control to install belts in difficult areas. Part Number 94170A
The Head Handler will
work with most cylinder
head threaded holes.
UNIVERSAL HOSE PLIERS FITS 1/2" TO 3/4"
Removal of many hoses can be difficult when the hose connection is in a confined area and stuck because of corrosion between
the hose and its fitting. These pliers have the ability to power rotate the hose to break it loose from its fitting. In the same motion
these pliers can be rotated 90° to easily pull the hose from the fitting. The specially designed tips of these pliers grip a large
surface area of the hose to reduce damage and help remove the hose. These pliers also work on a variety of hoses with different
diameters. The unique design helps in installing the hose by giving the professional technician a way to grip the hose down in
confined areas which restrict the use of the technicians hands. Made from quality steel these pliers come with soft grip handles.
BREAK LOOSE POWER ROTATE
POSITION
6 SP TOOLS / SCHLEY PRODUCTS INC.
HEAD HANDLER
Part Number 66110 6mm X 1.0 • 66120 1/4” X 20 • 66130 8mm X 1.25
Each part number contains two pieces
Part Number 66100 includes two of each of 6mm, 1/4" and 8mm
These unique tools allow the technician to easily lift and maneuver cylinder heads when service is
needed. Choose the appropriate thread size Head Handler, then (used in tandem) simply spin
the Head Handler into each end of the cylinder head until snug . Now you can easily lift and
carry the head.No more cut fingers from sharp edges or oil and coolant stains on your clothes.
There is a comfort grip with a balanced tee handle design. Made from heat treated steel these tools
have an attached floating washer for protection of the head and more contact area.
UNIVERSAL LONG REACH SPARK PLUG BOOT PULLER
This tool was designed to aid in the removal of spark plug wires. This universal long reach spark
plug boot puller has a swivel action that lets the technician reach down at any angle to grab the
spark plug boot and to use leverage to pull the rubber boot from the spark plug without damaging
the plug wire. The tips of the tool also have an opening where the spark plug wire can exit the tips
so not to damage the wire. This tool works on all types of vehicles.
Part Number 65350
VARIABLE ANGLE VALVE STEM SEAL
The area under the hood to access valve stem seals using the straight style
valve stem pliers has become encumbered with manifolds, wires, tubes
and linkages. The professional technician now has less room and more
difficulty accessing valve stem seals. This new tool can be used in areas
of restricted access through an innovative rotating jaw assembly. This
design allows the plier handles to rotate to any position above the head Part Number 62900
while the jaw assembly goes down into the spring cavity. These pliers can be used straight or at any
angle up to as far as a full 90°. The jaw tip is also innovative, in that it has a thin ledge for "hooking"
underneath stubborn valve stem seals. There are also four vertical raised ridges on the inner diameter
of the jaws to aid in gripping the outside diameter of the valve stem seal.
US Patent # 5,991,997
POSITION CHANGE FOR
REMOVAL OR INSTALLATION
1997
Part Number 96600
1/2" to 3/4"