September 2022
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
etween the two solar panels from the top and<br />
fold the tab at the bottom behind the sill flashing.<br />
Step 6: Nail the top fixing strip into a batten.<br />
Align the bottom corner of the lower gutter covers<br />
with the bottom edge of the solar panel and push<br />
the gutter covers into the gasket. Fold down the<br />
remaining tabs.<br />
Step 7: Open the orange box and fix three combibatten<br />
brackets to the right-hand side of the top<br />
panel. Open the blue box and fit the upper gutter<br />
between the solar panels. Push the joining strip<br />
into the gasket in the top edge of the panel below.<br />
Installing panel 4:<br />
Step 8: Slide the new panel into position and fix<br />
with rafter brackets at the bottom and batten<br />
brackets to the right-hand side. Push the lower<br />
side flashing into the gasket on the right-hand<br />
side of the panel. Fit the side fixing tabs and fold<br />
over the tab on the sill flashing.<br />
Fit the upper gutter between the<br />
solar panels and the nail<br />
gutter fixing strip to a<br />
batten. Push the upper<br />
gutter cover into the<br />
panel gasket. Fold the<br />
end of the joining strip<br />
into the gutter.<br />
Installing top<br />
flashing:<br />
Step 9: For each rafter it<br />
crosses, fix a rafter bracket to the top of<br />
the top left panel and secure with two 50mm<br />
screws each. Push the top flashing into the panel<br />
gasket and feed the two straps under the foam<br />
and secure the straps to a batten above.<br />
Final touches:<br />
Step 10: Remove the paper strip on the underside<br />
of the sill flashing and press down onto the tiles.<br />
Ensure that the bitumen strip is well bonded to<br />
the tiles. Two courses of tiles<br />
should be fitted around the<br />
perimeter of the solar<br />
panels. The final<br />
electrical connection<br />
and sign off must be<br />
completed by an MCS<br />
certified installer.<br />
Marley SolarTile can be<br />
installed in either columns<br />
or rows and the number of<br />
panels will depend on the roof size<br />
and energy requirements. Visit<br />
www.marley.co.uk/solarinstall to view our<br />
online configurator or to download a more<br />
detailed installation guide.<br />
Further advice and info on Marley SolarTile:<br />
www.marley.co.uk/solar<br />
01283 722222<br />
@MarleyLtd<br />
For further r<br />
inform<br />
ation<br />
or a hire quotation call<br />
01858 412 100<br />
Email: sales@cookerhire.com<br />
www.cookerhire.com
Change language