Panels & Furniture Asia September/October 2022

PRODUCT HIGHLIGHT
THE T3 IN DETAIL
The end-milling cutter with Leuco’s
triangular tungsten carbide (HW) turnover
knives is suitable for offset- and chip-free
jointing, hemming and sizing of solid
wood on CNC and joinery machinery. The
rounded edges on the triangular turnover
knives mill from bottom to top and vice
versa, leaving reportedly no blemishes on
the machined workpiece.
According to Leuco, the same is true
of the t3’s spiral plunge cutting when
milling free forms for pockets with
a diameter of more than 60mm. The
triangular carbide turnover knives
achieve three service lives. On all
four models with clockwise cutting
action, the cutting circle diameter
of the inserted blade milling cutter
measures 54mm, the shank length
is 52mm, and the number of teeth
is two plus two. Depending on the
version, the total length ranges
from 120-162.5mm and the cutting
width measures 63-106.5mm.
With a shank diameter of 20mm or
25mm and 12-18 segments, the t3
system achieves maximum speeds
of 12,000-22,000 rotations per
minute. P
With an Allen key,
all 18 knives can be
removed, cleaned
and replaced in
about 15-20 minutes
BLOW-SCAN
Blow Detection System
High system availability
(robust + low-maintenance system design)
GERMAN TECHNOLOGY
Permanent + automatic
„Inline-Calibration“
High detection accuracy thanks:
a. Compensation of sensor pollution
b. „AirKnife“ Technology
WIDE RANGE OF MEASURING SYSTEMS
FOR ENGINEERED WOOD PRODUCTION
www.electronic-wood-systems.com
Panels & Furniture Asia | September / October 2022 27