ABS/SRS Code Reader OBDII Scan Tool User's Guide - OTC

3
Using the Tool
Keypad Test
The Keypad Test is used to verify that
the keys are working correctly.
From the System Setup menu:
1. Select Keypad Test.
a. Press the UP or DOWN arrow
key until Keypad Test is
highlighted.
b. Press ENTER.
2. Press a Key.
• Key name or scroll direction should
inverse colors on the display.
• The only exception is the BACK
key. When BACK key is
pressed, the System Setup
menu appears.
Note: If the System Setup menu
does not appear, then the
BACK key is not working correctly.
Contact Technical Support
for assistance. The phone number
for Technical Support is provided
on the back side of the title
page.
SYSTEM SETUP
=========================
Adjust Contrast
Language Setup
Display Test
Keypad Test
Memory Test
�
Tool Information �
Keypad Test
=========================
ENTER
BACK
UP
LEFT⊳
RIGHT �
DOWN
POWER USER
Press BACK to Quit
3 – 10 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
�
�
�
�