You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SARGENT ®<br />
11-Line T-Zone Lever Locksets<br />
How to order<br />
(888) DUGMORE<br />
888.384.6673<br />
The SARGENT T-Zone* sets a higher standard for Grade 1 bored-in locks. The unique T-Zone construction provides<br />
unequalled strength and durability for the most demanding applications like schools and hospitals. This is ac<strong>com</strong>plished by<br />
true interlocking between the lockbody and the latch.<br />
Solid cast levers<br />
Ac<strong>com</strong>modates<br />
doors 1-3/4" (44mm) to<br />
2" (51mm) thick<br />
and 2-1/4" (57mm) to<br />
2-1/2" (64mm) thick<br />
Construction – Interlocking<br />
construction between lockbody and latch<br />
Lockbody – Cast/machined<br />
stainless steel<br />
Seamless<br />
brass tube<br />
Many functions are easily<br />
field changeable<br />
Simple<br />
cylinder removal<br />
Small 2-3/4"<br />
(70mm) dia. rose<br />
Security screw<br />
Only 45° of lever<br />
rotation to retract latch<br />
Multiple Key Systems<br />
available<br />
Direct linkage with fixed alignment between the hub and the latch is the best construction for quietly and effectively operating the latch. For<br />
this reason, SARGENT has developed the interlocking aligning and latch tubes, which form a rugged torque resistant “T” in the critical twist<br />
area. This “T-Zone” construction, <strong>com</strong>bined with long lasting <strong>com</strong>ponents, makes T-Zone Lever locks outstanding!<br />
Strength and Durability<br />
• Unequaled strength and durability<br />
• Withstands 3-1/2 times ANSI/BHMA A156.2<br />
Grade 1 torque force on a locked lever.<br />
Over 3,000 in/lbs!<br />
• Exceeds 10 times ANSI/BHMA A156.2<br />
Grade 1 standard for cycle testing. Over 8<br />
million cycles with virtually no lever sag!<br />
• Non-handed field reversible<br />
• Fits on minimum stiles 4-1/4" (108mm)<br />
(B and O roses) and 4-1/2" (114mm)<br />
(E and L roses) Torque values greatly<br />
increased by a stainless steel bearing that<br />
provides stops for the heat treated lever<br />
locking piece<br />
• 10 year limited warranty - no service<br />
required to maintain warranty<br />
28<br />
Convenience<br />
• Finishes: 3, 4, 9, 10, 10B, 10BL, 15, 20D,<br />
26, 26D & split finish<br />
• Fits both 160 & 161 door preps.<br />
No through-bolts required<br />
• Fewer parts for easier installation<br />
• Only 45 degrees of lever rotation required<br />
to retract latch<br />
• 4 Solid ADA lever designs and 4 roses<br />
available to cover a wide variety of door<br />
preps and design requirements<br />
Security<br />
• UL and cUL fire door Listed, conforms to<br />
UL10C and UBC7-2 (1997)<br />
• High security lever attachment available for<br />
applications subject to severe vandalism<br />
• Resists vandalism<br />
• Torx® and spanner screws<br />
• Classroom security function available<br />
• Security key systems available (V-10,<br />
Signature, Keso F1, Keso, XC)<br />
Prefix Series/Guarded/Function<br />
11G05 OL 26D<br />
Rose/Lever<br />
Applications<br />
• High traffic areas – offices, public buildings,<br />
and hospitals<br />
• High abuse areas – institutions, schools,<br />
retail<br />
• Any door that requires the contemporary<br />
look of a small rose and durability that<br />
exceeds Grade 1 standards Innovation<br />
• SARGENT’s revolutionary SARGuard<br />
available<br />
• Patented “T-Zone” construction with true<br />
interlocking between the lockbody and the<br />
latch<br />
201 Fax: 888.329.3846<br />
www.dugmore.<strong>com</strong> sales@dugmore.<strong>com</strong><br />
Finish<br />
Available with the<br />
antimicrobial finish.<br />
Learn more on page 4