EDH 28 Universal Dampers - Dictator

Universal Dampers
Dimensions
Technical Data and Order
Information
Accessories
Page 03.016.00
EDH 28 Universal Dampers
With single fixing thread
Fix the damper directly with its thread and the nut. Make sure that the direction of
impact is parallel to the axis of the damper. A fixing block is available as an extra
accessory.
When choosing a damper with stepped adjustment (ZR), the damping force is simply
adjusted by pulling and turning the piston rod. Dampers with screw adjustment (NR)
are supplied with an adjustment screw at the top of the piston rod.
A damper with two fixing threads should always be used with heavy loads.
ø28
200 400 50 3000 5200 149 30 157 ABS
200 002 50 3000 5200 154 30 130 K
200 410 70 3000 4400 149 30 192 ABS
200 102 70 3000 4400 154 30 159 K
200 209* 75 3000 3100 154 30 185 K
200 420 100 3000 3100 149 30 225 ABS
200 202 100 3000 3100 154 30 193 K
200 206* 100 3000 3100 154 30 257 K
200 302 120 3000 2600 154 40 212 K
105 30
© DICTATOR TECHNIK GMBH • Gutenbergstr. 9 • D - 86356 Neusäß • Germany
Tel. (0821)24673 - 0 • Fax (0821) 24673 - 90 • E-Mail info@dictator.de • 0034
M16x1
ø8,5
Length B Stroke
15
EDH 28 with one thread (stepped adjustment)
* Dampers certified for fire protection doors (no. Do. 11.3)
Advice: The dampers listed above are also available with screw regulation.
To help you select the appropriate damper, formulae and examples
can be found at the beginning of this chapter.
17
21
8
44
Fixing bracket Part no. 700 159
Fixing block Part no. 205 199
ø5,1
35
22
35
Km 5 DIN 75 Countersink
30
7,5
15
27
M16x1
ø23
(25 on fire
protection models)
Part no. Stroke Impact Damping Energy Returning Length B Type of
[mm] mass force per stroke force [mm] dampmax.
[kg] max. [N] max. [Nm] max. [N] ing