You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>EDH</strong> <strong>28</strong> dampers are one-side operating<br />
hydraulic dampers for impact speeds up<br />
to 2,0 m/s.<br />
All <strong>EDH</strong> <strong>28</strong> dampers are produced with<br />
and without an overload safety valve<br />
(ABS). This anti-blocking device prevents<br />
the piston rod bending when the impact<br />
is too strong.<br />
Two different adjustment options are<br />
available; either adjustment screw or pull<br />
and rotate the piston rod. Make your<br />
choice considering ease of access and<br />
the possibility of unauthorized<br />
adjustment.<br />
After each damping an integrated spring<br />
returns the piston rod to its normal<br />
position. <strong>EDH</strong> <strong>28</strong> dampers can also be<br />
supplied with a magnet instead of the<br />
return spring. These dampers are<br />
particularly suitable for light sliding<br />
doors as they have no return spring that<br />
can slightly re-open the door.<br />
<strong>EDH</strong> <strong>28</strong> dampers are mainly used on<br />
sliding doors and in transportation<br />
systems. A special design with an excess<br />
pressure valve is available for use on fire<br />
protection doors (Certificate No. Do.11.3).<br />
Technical Data<br />
<strong>EDH</strong> <strong>28</strong> <strong>Universal</strong> <strong>Dampers</strong><br />
<strong>Universal</strong> <strong>Dampers</strong><br />
With and without overload safety valve (ABS)<br />
For impact masses up to 3000 kg<br />
Impact speed 0,08 to 2 m/s<br />
Correction factor f = 2,5<br />
K<br />
Strokes per minute maximum 10<br />
Temperature range –30° to 50°C<br />
Finish zinc-plated, piston rod chrome-plated<br />
Standard accessories 1 nut for each thread<br />
© DICTATOR TECHNIK GMBH • Gutenbergstr. 9 • D - 86356 Neusäß • Germany<br />
Tel. (0821)24673 - 0 • Fax (0821) 24673 - 90 • E-Mail info@dictator.de • 0034 Page 03.015.00
<strong>Universal</strong> <strong>Dampers</strong><br />
Dimensions<br />
Technical Data and Order<br />
Information<br />
Accessories<br />
Page 03.016.00<br />
<strong>EDH</strong> <strong>28</strong> <strong>Universal</strong> <strong>Dampers</strong><br />
With single fixing thread<br />
Fix the damper directly with its thread and the nut. Make sure that the direction of<br />
impact is parallel to the axis of the damper. A fixing block is available as an extra<br />
accessory.<br />
When choosing a damper with stepped adjustment (ZR), the damping force is simply<br />
adjusted by pulling and turning the piston rod. <strong>Dampers</strong> with screw adjustment (NR)<br />
are supplied with an adjustment screw at the top of the piston rod.<br />
A damper with two fixing threads should always be used with heavy loads.<br />
ø<strong>28</strong><br />
200 400 50 3000 5200 149 30 157 ABS<br />
200 002 50 3000 5200 154 30 130 K<br />
200 410 70 3000 4400 149 30 192 ABS<br />
200 102 70 3000 4400 154 30 159 K<br />
200 209* 75 3000 3100 154 30 185 K<br />
200 420 100 3000 3100 149 30 225 ABS<br />
200 202 100 3000 3100 154 30 193 K<br />
200 206* 100 3000 3100 154 30 257 K<br />
200 302 120 3000 2600 154 40 212 K<br />
105 30<br />
© DICTATOR TECHNIK GMBH • Gutenbergstr. 9 • D - 86356 Neusäß • Germany<br />
Tel. (0821)24673 - 0 • Fax (0821) 24673 - 90 • E-Mail info@dictator.de • 0034<br />
M16x1<br />
ø8,5<br />
Length B Stroke<br />
15<br />
<strong>EDH</strong> <strong>28</strong> with one thread (stepped adjustment)<br />
* <strong>Dampers</strong> certified for fire protection doors (no. Do. 11.3)<br />
Advice: The dampers listed above are also available with screw regulation.<br />
To help you select the appropriate damper, formulae and examples<br />
can be found at the beginning of this chapter.<br />
17<br />
21<br />
8<br />
44<br />
Fixing bracket Part no. 700 159<br />
Fixing block Part no. 205 199<br />
ø5,1<br />
35<br />
22<br />
35<br />
Km 5 DIN 75 Countersink<br />
30<br />
7,5<br />
15<br />
27<br />
M16x1<br />
ø23<br />
(25 on fire<br />
protection models)<br />
Part no. Stroke Impact Damping Energy Returning Length B Type of<br />
[mm] mass force per stroke force [mm] dampmax.<br />
[kg] max. [N] max. [Nm] max. [N] ing
Dimensions<br />
Technical Data and Order<br />
Information<br />
Accessories<br />
15<br />
<strong>Universal</strong> <strong>Dampers</strong><br />
<strong>EDH</strong> <strong>28</strong> <strong>Universal</strong> <strong>Dampers</strong><br />
With fixing threads at both ends of the cylinder<br />
Fix the damper directly with the threads and the nuts. Make sure the direction of<br />
impact is parallel to the axis of the damper. The second thread ensures it is securely<br />
fixed, even when used with heavy loads. A fixing block is available as an extra<br />
accessory.<br />
The damping force can be continuously adjusted by simply pulling and turning the<br />
piston rod.<br />
M16x1<br />
© DICTATOR TECHNIK GMBH • Gutenbergstr. 9 • D - 86356 Neusäß • Germany<br />
Tel. (0821)24673 - 0 • Fax (0821) 24673 - 90 • E-Mail info@dictator.de • 0034 Page 03.017.00<br />
ø<strong>28</strong><br />
200 207* 90 3000 3100 154 30 220 25<br />
200 203 100 3000 3100 154 40 200 27<br />
200 303 120 3000 3100 154 40 220 27<br />
203 115-<strong>28</strong> 200 3000 2400 149 40 314 27<br />
17<br />
105 30<br />
Length B<br />
* <strong>Dampers</strong> certified for fire protection doors (no. Do. 11.3)<br />
Advice: To help you select the appropriate damper, formulae and examples<br />
can be found at the beginning of this chapter.<br />
21<br />
8<br />
44<br />
M16x1<br />
ø5,1<br />
15<br />
35<br />
ø8,5<br />
ø10<br />
Stroke<br />
<strong>EDH</strong>a <strong>28</strong> with fixing threads at both ends of the cylinder<br />
Part no. Stroke Impact Damping Energy Returning Length B Buffer<br />
[mm] mass force per stroke force [mm] R<br />
max. [kg] max. [N] max. [Nm] max. [N] [mm]<br />
22<br />
35<br />
30<br />
7,5<br />
15<br />
Km 5 DIN 75 Countersink<br />
Fixing bracket Part no. 700 159<br />
Fixing block Part no. 205 199<br />
R<br />
M16x1<br />
ø23
<strong>Universal</strong> <strong>Dampers</strong><br />
Dimensions<br />
Technical Data and<br />
Order Information<br />
Page 03.018.00<br />
<strong>EDH</strong> <strong>28</strong> <strong>Universal</strong> <strong>Dampers</strong><br />
With magnet<br />
<strong>EDH</strong> <strong>28</strong> <strong>Universal</strong> dampers with magnets are particularly suitable for light sliding<br />
doors, with no return spring to re-open the door. The piston rod is pulled back to its<br />
normal position by the magnet when the door is opened again.<br />
The damping force can be continuously adjusted by simply pulling and turning the<br />
piston rod.<br />
Use a steel plate to make contact with the magnet. We recommend our AP GD 50<br />
G16 counter plate - part no. 040 025. (Please see chapter 7<br />
page 07.041.00).<br />
Fix the damper directly with its thread and the nut. Make sure<br />
that the direction of impact is parallel to the axis of the damper.<br />
A <strong>EDH</strong>M damper with two fixing threads should always be<br />
used with heavy loads.<br />
A fixing block is available as an extra accessory (see diagram on<br />
page 03.016.00).<br />
M16x1<br />
15<br />
ø<strong>28</strong><br />
ø<strong>28</strong><br />
Length B<br />
Length B<br />
M16x1<br />
M16x1<br />
203 150* 50 3000 5200 154 0 130<br />
200 101 70 3000 4400 154 0 163<br />
203 015* 120 3000 2600 149 0 220<br />
© DICTATOR TECHNIK GMBH • Gutenbergstr. 9 • D - 86356 Neusäß • Germany<br />
Tel. (0821)24673 - 0 • Fax (0821) 24673 - 90 • E-Mail info@dictator.de • 0034<br />
15<br />
15<br />
<strong>EDH</strong>M <strong>28</strong> - with one thread and magnet<br />
Advice: To help you select the appropriate damper, formulae and examples<br />
can be found at the beginning of this chapter.<br />
ø8,5<br />
ø8,5<br />
Stroke<br />
Stroke<br />
Part no. Stroke Impact Damping Energy Returning Length B<br />
[mm] mass force per stroke force [mm]<br />
max. [kg] max. [N] max. [Nm] max. [N]<br />
<strong>EDH</strong>M <strong>28</strong> - with threads at both ends of the cylinder and magnet<br />
* <strong>Dampers</strong> certified for fire protection doors (no. Do. 11.3)<br />
40<br />
40<br />
ø32<br />
ø32