EDH 28 Universal Dampers - Dictator

Universal Dampers
Dimensions
Technical Data and
Order Information
Page 03.018.00
EDH 28 Universal Dampers
With magnet
EDH 28 Universal dampers with magnets are particularly suitable for light sliding
doors, with no return spring to re-open the door. The piston rod is pulled back to its
normal position by the magnet when the door is opened again.
The damping force can be continuously adjusted by simply pulling and turning the
piston rod.
Use a steel plate to make contact with the magnet. We recommend our AP GD 50
G16 counter plate - part no. 040 025. (Please see chapter 7
page 07.041.00).
Fix the damper directly with its thread and the nut. Make sure
that the direction of impact is parallel to the axis of the damper.
A EDHM damper with two fixing threads should always be
used with heavy loads.
A fixing block is available as an extra accessory (see diagram on
page 03.016.00).
M16x1
15
ø28
ø28
Length B
Length B
M16x1
M16x1
203 150* 50 3000 5200 154 0 130
200 101 70 3000 4400 154 0 163
203 015* 120 3000 2600 149 0 220
© DICTATOR TECHNIK GMBH • Gutenbergstr. 9 • D - 86356 Neusäß • Germany
Tel. (0821)24673 - 0 • Fax (0821) 24673 - 90 • E-Mail info@dictator.de • 0034
15
15
EDHM 28 - with one thread and magnet
Advice: To help you select the appropriate damper, formulae and examples
can be found at the beginning of this chapter.
ø8,5
ø8,5
Stroke
Stroke
Part no. Stroke Impact Damping Energy Returning Length B
[mm] mass force per stroke force [mm]
max. [kg] max. [N] max. [Nm] max. [N]
EDHM 28 - with threads at both ends of the cylinder and magnet
* Dampers certified for fire protection doors (no. Do. 11.3)
40
40
ø32
ø32