Mungo Main Catalogue
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Nylon Products<br />
MBR Nylon Frame Plug for solid materials, ETAG 020<br />
Features<br />
• ETAG 020 - Approved for multiple use in concrete and masonry for<br />
non-structural applications<br />
• Assessment of resistance under fire exposure F90 for fastening of<br />
façade systems<br />
• Approved and particularly suitable for applications in solid materials<br />
• Knock-in protection prevents premature expansion while installing<br />
• Less drilling - faster installation<br />
• MBR with an expansion zone of 50mm for a faster installation<br />
• Helps to avoid cold transmission and contact corrosion between<br />
different materials<br />
• Wings stop the plug rotating in the drill hole<br />
• Plug made from high-quality polyamide PA6<br />
• Through fixing<br />
• Indoor (zinc plated) and outdoor (stainless steel) applications<br />
Applications<br />
façade fixings, profiles, substructures, frames<br />
Technical Data<br />
Concrete ≥ C12/15<br />
app. load (kN)<br />
Calcium silicate brick<br />
app. load (kN)<br />
Brick<br />
app. load (kN)<br />
Bending moment (Nm)<br />
galv. steel<br />
Bending moment (Nm)<br />
stainl. steel<br />
MBR 6 1) 0.3 1) 0.25 1) 0.25 - -<br />
MBR 8 1) 0.5 1) 0.4 1) 0.4 1) 3.4 1) 3.2<br />
MBR 10 1) 2) 0.8 0.6 1) 0.5 1) 9.2 1) 8.6<br />
MBR 10x60 1) 2) 0.8 0.6 1) 0.5 1) 7.9 1) 7.4<br />
Important: Recommended loads / The approved loads and detailed specifications of stones can be found in the European Technical Assessment 15/0068 / Approved loads: Tension, shear and combined loads /<br />
1 kN ≈ 100 kg / Safety factor of 2.5 is included / Values only valid when using <strong>Mungo</strong> safety screws / 1) <strong>Mungo</strong> lab tested / 2) Partial safety factor 1.8<br />
Installation<br />
www.mungo.swiss<br />
119